• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.543-548
• /
• 2006

This paper presents the vibration characteristics of scaffolding structures with a hoist according to payloads. In order to analyze the vibrational and structural characteristics for 20-step scaffolding structure, structural and vibrational characteristics for 2-step scaffolding structure were compared with some experimental results. The numerical results for natural frequencies of scaffolding structures have a good agreement with experimental ones. Through the numerical analysis, firstly, it is shown that the maximum stress of scaffolding structures is lower than von-mises yield criteria when four persons with total weight of 280kgf are working at the top of the scaffolding structures. Secondly vibration characteristics including natural frequencies and modes for scaffolding structures are shown in case of various kinds of moving masses.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.584-590
• /
• 2003

본 논문에서는 최근에 개발된 Envelope ADI-FDTD의 수치적 특성에 대하여 고찰하였다. 수치 실험을 통하여 Envelope ADI-FDTD가 시간간격에 상관없이 무조건 안정하고, 신호의 포락선을 해석함으로써 기존의 ADI-FDTD보다 더 좋은 분산특성을 얻을 수 있음을 보였다. 이러한 특성은 특별한 경우에서는 Nyquist 극한값까지 시간간격을 키울 수 있는 가능성을 제공한다 수치결과를 통해서 Envelope ADI-FDTD가 단일주파수 또는 대역이 제한된 시스템의 해석에 있어 유용하게 사용될 수 있음을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.48-58
• /
• 2011

In this paper, an attempt has been made to design the current and speed proportional and integral (PI) regulators of self-commutating current source inverter-fed induction motor drive having capacitors at the machine end and to investigate the transient performance of the same for step changes in reference speed. The mathematical model of the complete drive system is developed in closed loop, and the characteristic equations of the systems are derived using perturbation about steady-state operating point in order to develop the characteristic equations. The D-partition technique is used for finding the stable region in the parametric plane. Frequency scanning technique is used to confirm the stability region. Final selection of the regulator parameters is done by comparing the transient response of the current and speed loops for step variations in reference. The performance of the drive is observed analytically through MATLAB simulation.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.151-160
• /
• 2000

An experimental and theoretical analysis for the improvement of dynamic characteristics and design of electro-hydraulic flow control servo valve are performed. The theoretical results are compared with the experimental step responses, and the important design parameters of an electro-hydraulic flow control servo valve are derived by using the simulation program. Simulation parameters of nozzle jet coefficient and orifice and spool valve discharge coefficient are given through experiment. The theoretical and experimental step response curves show that the valve gain depends on the fixed orifice and nozzle $ratio(R_on)$ and is maximum at $R_on=1.$ And drain orifice in the flapper - nozzle return line creates a small back pressure, which improves the performance fur the valve.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1461-1470
• /
• 2012

This paper reports the contamination performance of transmission line porcelain insulators tested under five different contaminant conditions - clean and ESDD (equivalent salt deposit density) level (A, B, C, and D) through measurement of their leakage current under drop of potential method. To estimate the contamination for transmission line porcelain insulators, leakage current waveform and its maximum value were measured under step-up power test. In the clean insulators test, % distortion factors decreased with increasing step-up power, and as the ESDD level increased, some characteristics such as frequency analysis, harmonics and % distortion facotor could be used for contamination diagnosis of the transmission line porcelain insulators.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.241-245
• /
• 2004

The electric safety tends to be more important according to electric facilities's increase and its use in these days. This paper analyzes soil resistivity of two areas in the country using CDEGS(Current Distribution, Electromagnetic Interference, Grounding and Soil Structure, Canada). We designed rod and mesh grounding system and made a comparative study of ground resistance, GPR(Main Electrode Potential Rin), step voltage and touch voltage. Then we could analyz only the safety but also economical efficiency in elocution of grounding. As a result of simulation, ground resistance, GPR(Main Electrode Potential Rise), step voltage and touch voltage became higher in proportion to soil resistivity. Therefore we expect to estimate the propriety of grounding system design through accumulation and analysis of data in consideration of characteristics of soil.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.440-444
• /
• 2007

As the mobile communication service is widely used, the demand for wireless repeaters is rapidly increasing because of the easiness of extending service areas. But a wireless repeater has a problem that the output of the transmit antenna is partially fed back to the receive antenna, which results in feedback interference. In this paper, we propose a new varable step-size LMS algorithm, which utilizes correlation between reference and error signals to adjust the step sizes, for cancelling the feedback interference signals in the WCDMA repeater under time-varying multi-path channels. The proposed algorithm was investigated through computer simualation by being applied to the time-varying channels. The simulation results demonstrated that the proposed one is superior to the conventional ones in terms of cancelation perormance.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권4호
• /
• pp.198-204
• /
• 2003

In this paper, we presented a new algebraic iterative algorithm for the optimal control of the nonlinear systems. The algorithm is based on two steps. The first step transforms nonlinear optimal control problem into a sequence of linear optimal control problem using the quasilinearization method. In the second step, TPBCP(two point boundary condition problem) is solved by algebraic equations instead of differential equations using the new integral operational matrix of BPF(block pulse functions). The proposed algorithm is simple and efficient in computation for the optimal control of nonlinear systems and is less error value than that by the conventional matrix. In computer simulation, the algorithm was verified through the optimal control design of synchronous machine connected to an infinite bus.

• 농촌계획
• /
• 제14권4호
• /
• pp.69-76
• /
• 2008

The purpose of this study is to propose the rural landscape planning criteria for Korean rural area. For this, the meaning of rural landscape is defined, and the legislative framework and several legal processes are surveyed, including the deliberation system for natural landscape impacts and the Landscape Law recently legislated. Through literature studies and analysis, the rural landscape planning criteria are proposed, which have step-by-step processes; goals and objectives, analysis and estimation for present conditions, basic planning concept, landscape planning for different visual landscape types, landscape designing for visual elements, and practical action plans. Each processes are designed considering the existing legislative framework, so it can be well-matched to current systems. But, because there are few rural landscape plans so far, comparing to the urban landscape plans, the validity of this criteria should be verified in the future studies.

• Journal of the Korean Statistical Society
• /
• 제18권1호
• /
• pp.13-25
• /
• 1989

This paper suggests a classification rule with unequal covariance matrices when a patterned incomplete data are involved in the discriminant analysis. This is an extension of Geisser's (1966) result to the case of missing observations. For the calssificaiton rule, we introduce an algorithm which contains data augmentation step and Monte Carlo integration step and show that the algorithm yields a consistant estimator of true classification probability. The proposed method is compared to the complete observation vector method through a Monte Carlo study. The results show that the suggested method, in general, performs better than the complete observation vector method which ignores those vectors of observation with one or more missing values from the analysis. The results also verify the consistency of the algorithm.