• 지구물리와물리탐사
• /
• 제27권2호
• /
• pp.129-143
• /
• 2024

자기지전류(magnetotelluric, MT) 탐사 시, 지표면 부근의 작은 불균질체가 존재할 경우 겉보기비저항이 주파수와 무관하게 이동하는 정적효과(static shift)가 발생한다고 알려져 있다. 이러한 정적효과가 자료에 포함되어 있으면 지하 구조 해석에 오류가 발생하기 때문에 정적효과에 의한 왜곡을 해결하기 위한 연구가 지난 수십년 동안 수행되어 왔다. 가장 대표적인 방법으로는 역산 전에 MT 자료에서 정적효과를 제거하기 위해 보정하는 방법이 있다. 이와 달리, 역산 과정에서 정적효과를 역산의 변수로 포함시켜 그 크기를 추정하거나 따로 정적효과를 추정하지 않고 역산 과정에서 보정을 수행하기도 한다. 이외에도 다른 물리탐사 기법을 통해 얻은 자료를 사용하여 MT 탐사 정적효과를 제거할 수 있다. 하지만 지금까지 연구된 보정법들은 1차원적인 정적인 반응에만 국한되어 있어 2차원이나 3차원의 자료를 역산하고 해석하는 데에는 여전히 한계가 있다. 이 논문에서는 지금까지 MT 자료에서 정적효과를 처리하는 여러 방법들에 대해 분석하여 향후 정적효과 관련 연구를 위한 기초를 제공하고자 한다.

• Annals of Occupational and Environmental Medicine
• /
• 제34권
• /
• pp.27.1-27.12
• /
• 2022

Background: Shift work that interferes with normal sleep patterns, is known to be a cause of sleep disturbance and has been studied through various occupational groups. However, it is not known which shift type is better for sleep health. Methods: This study included 568 firefighters. Sleep quality was evaluated using Pittsburgh Sleep Quality Index. Sleep quality was categorized into 2 groups; good quality (≤ 5 points) and poor quality (≥ 6 points). Demographic variables, depression, anxiety, type of shift, and job were collected by self-reported questionnaires. The χ² test, t-test, and multiple logistic regression analysis were used to evaluate the effect of shift type on the sleep quality of firefighters. Results: Three hundred thirty-seven firefighters (59.3%) have poor sleep quality. Compared to day workers, the odds ratios (ORs) of poor sleep quality were 2.169 (95% confidence interval: 1.137-4.134) in 6-day cycle, 2.161 (1.150-4.062) in 9-day cycle, 1.805 (1.087-2.997) in 21-day cycle, and 1.485 (0.718-3.069) in 3-day cycle. The ORs of poor sleep quality were 1.697(1.021-2.823) in fire suppression and 2.325 (1.213-4.455) in emergency medical service compared to administration. Conclusions: All shift work type except for the 3-day cycle was associated with poor sleep quality compared to day work.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1197-1207
• /
• 2014

Common-mode voltage (CMV) causes overvoltage stress to winding insulation and damages AC motors. CMV with high dv/dt causes leakage currents, which create noise problems for equipment installed near the converter. This study proposes a new pulse-width modulation (PWM) strategy for three-level T-type NPC inverters. This strategy substantially eliminates CMV. The principle for selecting suitable triangle carrier signals for the three-level T-type NPC is described. The proposed method can mitigate the peak value of CMV by 50% compared with the phase disposition pulse-width modulation method. Furthermore, the proposed method exhibits better harmonic spectrum and lower root mean square value for the CMV than those of the reduced-CMV method on the basis of the phase opposition disposition PWM scheme with modulation index higher than 0.5. The proposed modulation can easily be implemented using software without any additional hardware modifications. Both simulation and experimental results demonstrate that the proposed carrier phase-shift PWM method has good output waveform performance and reduces CMV.

• Journal of Korean Neurosurgical Society
• /
• 제63권4호
• /
• pp.427-432
• /
• 2020

Three randomized control trials (RCTs), published in 2013, investigated efficacy of mechanical thrombectomy in large vessel occlusions and did not show better results compared to intravenous (IV) recombinant tissue-type plasminogen activator (tPA) alone. However, most clinicians treating stroke consider mechanical thrombectomy as the standard treatment rather than using IV tPA alone. This paradigm shift was based on five RCTs investigating efficacy of mechanical thrombectomy in acute ischemic stroke conducted from 2010 to 2015. They demonstrated that mechanical thrombectomy was effective and safe in acute ischemic stroke with anterior circulation occlusion when performed within 6 hours of stroke onset. There are four reasons underlying the different results observed between the trials conducted in 2013 and 2015. First, the three RCTs of 2013 used low-efficiency thrombectomy devices. Second, the three RCTs used insufficient image selection criteria. Third, following the initial presentation at the hospital, reperfusion treatment required a long time. Fourth, the three RCTs showed a low rate of successful recanalization. Time is the most important factor in the treatment of acute ischemic stroke. However, current trends utilize advanced imaging techniques, such as diffusion-weighted imaging and multi-channel computer tomographic perfusion, to facilitate the detection of core infarction, penumbra, and collateral flows. These efforts demonstrate that patient selection may overcome the barriers of time in specific cases.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.751-770
• /
• 2016

Purpose: Two-stage ${\bar{X}}$ chart is a useful tool for process control when a surrogate variable may be used together with a performance variable. This paper extends the two-stage ${\bar{X}}$ chart to a three stage version by decomposing the first stage into the preliminary stage and the main stage. Methods: The expected cost function is derived using Markov-chain approach. The optimal designs are found for numerical examples using a genetic algorithm combined with a pattern search algorithm and compared to those of the two-stage ${\bar{X}}$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the two-stage ${\bar{X}}$ chart in terms of the expected cost per unit time unless the correlation between the performance and surrogate variables is modest and the shift in process mean is smallish. Conclusion: Three-stage ${\bar{X}}$ chart may be a useful alternative to the two-stage ${\bar{X}}$ chart especially when the correlation between the performance and surrogate variables is relatively high and the shift in process mean is on the small side.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.935-956
• /
• 2016

With the help of advanced image acquisition and processing technology, the vision-based measurement methods have been broadly applied to implement the structural monitoring and condition identification of civil engineering structures. Many noncontact approaches enabled by different digital image processing algorithms are developed to overcome the problems in conventional structural dynamic displacement measurement. This paper presents three kinds of image processing algorithms for structural dynamic displacement measurement, i.e., the grayscale pattern matching (GPM) algorithm, the color pattern matching (CPM) algorithm, and the mean shift tracking (MST) algorithm. A vision-based system programmed with the three image processing algorithms is developed for multi-point structural dynamic displacement measurement. The dynamic displacement time histories of multiple vision points are simultaneously measured by the vision-based system and the magnetostrictive displacement sensor (MDS) during the laboratory shaking table tests of a three-story steel frame model. The comparative analysis results indicate that the developed vision-based system exhibits excellent performance in structural dynamic displacement measurement by use of the three different image processing algorithms. The field application experiments are also carried out on an arch bridge for the measurement of displacement influence lines during the loading tests to validate the effectiveness of the vision-based system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1784-1785
• /
• 2011

PS(Phase Shift) 방식을 이용하여 3차원 이미지 형상복원 시스템을 구현하였다. PS 방식은 위상을 이동시켜서 얻어진 강도를 arctan 시킴으로써 $-{\pi}{\sim}{\pi}$ 범위의 접혀진(wrapped) 위상을 얻을 수 있으며, 이러한 wrapped 위상을 위상 펼침(unwrapping) 알고리즘을 이용하여 불연속을 제거할 수 있다. 얻어진 위상 정보는 물체의 높이 정보에 비례하기 때문에 위상 분포로써 3차원 형상을 복원할 수 있다. Unwrapping 알고리즘에는 다양한 방식이 있지만 본 연구에서는 LabVIEW 프로그램을 이용하여 Goldstein 알고리즘을 구현하였으며, 감마(Gamma) 효과에 의한 노이즈를 줄이기 위하여 프로젝트와 카메라의 보정(calibration) 프로그램을 개발 및 적용하였다. 이와 같은 실험을 통하여 효과적으로 3차원 형상 정보를 얻을 수 있었다.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.91-104
• /
• 2005

Tolerance analysis plays an important role in design and manufacturing stages for reducing manufacturing cost by improving producibility. In most production processes encountered in practice, a process mean may shift or drift in the long run although process is in control. This study discusses the feasibility of three most common inflation factors(Bender, Gilson and Six Sigma) as a correction to Root Sum of Squares(RSS) method to compensate heuristically for a shift of process mean and nonnormal component distributions from simulation experiments and proposes the guidelines for choosing the inflation factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1767_1768
• /
• 2009

4-step 알고리즘을 이용하여 3차원 이미지 위상 정보를 분석하였다. Carre(1966)에 의하여 제시된 위상 분석 기술은 위상이동에 대하여 설명하고 있다. Wyant(1982)에 의한 4-step 알고리즘은 수많은 PSI(Phase-Shift Interferometry)법[1] 중에서 가장 일반적인 내용이다. 그러나 실험장비 설치 시, 매우 어렵다는 단점이 있다. 실험 과정에서 물체의 3차원 형상을 얻기 위해 매우 간단히 실험 설치를 하였다. 간섭 패턴은 추가적인 렌즈, 거울, 모터와 같은 광학장비 없이 랩뷰 프로그램과 비젼 시스템을 사용하여 구축하였다. 4-step method와 컴퓨터 프로그램에 의해 생성된 unwrapping image에 의해 물체의 wrapped된 이미지를 얻었다. 실험에 의하여 얻어진 간섭패턴을 분석 함으로써, 웨이브 프론트, 강도 그래프, 3차원 형상, 상수 데이터와 같은 다양한 정보를 얻을 수 있었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권3호
• /
• pp.112-121
• /
• 2002

This paper describes a new bike system for the postural balance rehabilitation training. Virtual environment and three dimensional graphic model is designed with CAD tools such as 3D Studio Max and World Up. For the real time bike simulation, the optimized WorldToolKit graphic library is embedded with the dynamic geometry generation method, multi-thread method, and portal generation method. In this experiment, 20 normal adults were tested to investigate the influencing factors of balancing posture. We evaluated the system by measuring the parameters such as path deviation, driving velocity, COP(center for pressure), and average weight shift. Also, we investigated the usefulness of visual feedback information by weight shift. The results showed that continuous visual feedback by weight shift was more effective than no visual feedback in the postural balance control It is concluded this system might be applied to clinical use as a new postural balance training system.