• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.235-241
• /
• 2004

Computations were performed to investigate the effects of air staging on combustion in three stage heavy-oil fired combustion burner. The burner was designed for 3 MW. Different amounts of air are introduced into each 3 three stages by means of each dampers. The goal of the study is to understand combustion phenomena according to each air stage mass ratios through CFD. Air flow rates at three inlets are adjusted by dampers inside a burner. Here, injection conditions of liquid fuel are kept constant throughout all simulations. This assumption is made in order to limit the complexity of oil combustion though it may cause some disagreement. In case of cold flows, only longitudinal velocities arc considered, On the other hand, flow, temperature and NOx generations are taken into account for reactive flows. Simple parametric study was conducted by setting 1'st air stage mass ratio as a parameter. And an optimal operation condition was found. The computational study is based on k-e model, P-1 radiation model(WSGGM) and PDF, and is implemented on a commercial code, FLUENT.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.1067-1082
• /
• 2003

In this paper, we propose a randomized response model with discrete quantitative attribute by three-stage cluster sampling for obtaining discrete quantitative data by using the Liu & Chow model(1976), when the population was made up of sensitive discrete quantitative clusters. We obtain the minimum variance by calculating the optimum number of fsu, ssu, tsu under the some given constant cost. And we obtain the minimum cost under the some given accuracy.

• ETRI Journal
• /
• v.10 no.4
• /
• pp.127-139
• /
• 1988

전전자교환기에서 가장 많이 이용되고 있는 T-S-T three-stage 스위치 네트워크의 blocking 확률에 대한 대표적인 세가지 모형에 대해 살펴보고 스위치 네트워크의 구조 또는 통화로 탐색수에 따라 그 적용이 제한된 blocking 확률식에 대해 일반적으로 적용할 수 있는 확장된 표현식으로 유도하여 보았으며 각각에 대한 비교분석을 수행하였다. 또한 blocking 확률에 따른 three-stage 스위치 네트워크의 통화처리용량을 산출하는 방법을 설명하고 수리적인 예로서 위에서 제안된 blocking 확률모형들을 이용하여 TDX-1B 스위치 네트워크의 통화처리용량을 산출하여 보았다. 끝으로 T-S-T three-stage 스위치 네트워크에서의 blocking 확률모형들에 대한 전반적인 검토와 함께 blocking 확률을 줄일 수 있는 방법을 제안하였다.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.247-256
• /
• 2003

In this study, we systemize the theoretical validity for applying RRM to three-stage cluster sampling method and derive the estimate and it's variance of sensitive parameter. We derive the minimum variance form under the optimal values of the subsample sizes when the costs are fixed. Under the some given precision, we obtain the optimal values of the subsample sizes and derive the minimum cost form by using them. We apply the three-stage cluster RRM to field survey and suggest some necessary points for practical use.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.191-194
• /
• 1999

The balanced amplifier is a practical amplifier to, implement a broadband amplifier that has flat gain and good input and output VSWR. Three-stage amplifier design procedure usually divided into three partition satisfying the following requirements : low noise figure, high gain and high power output. FHX35LG HEMT device is used in the design can be obtained low noise figure at the first-stage, MGA82563 MMIC device is used in the design can be maintained high gain at the second-stage, and AHI MMIC device is used in the design can be required high power output at the third-stage. The results of three-stage balanced amplifier show that power gain is about 40㏈, noise figure is less than 1.2㏈ at operating frequency.

• Journal of Ginseng Research
• /
• v.19 no.2
• /
• pp.171-174
• /
• 1995

Freshly harvested American ginseng (Panax quinquefolium L.) seeds were stratified at two locations over each of three years. Seed development and temperature in the stratification boxes were investigated until the seed was removed 12 months later and direct-seeded in the field. During stratification and seeding (14 months) three embryo stages were identified. In Stage I of 250 days (Sept. to mid-May) embryo length increased from about 0.5 to 1.0 mm: in Stage II of 100 days (mid-May to late Aug. when seeded) length increased to 2.0 mm and in Stage III (late Aug. to late Nov.) length increased to 5.3 mm. Excerpt split width could also be placed in three stages. Changes in embryo length correlated with embryo endosperm length ratio. Insertion compression tests showed that the excerpt softened rapidly in late Stage II and throughout Stage III. The stratification box temperatures at all depths (10, 25 and 50 cm) never exceeded -2$^{\circ}C$ even when the air temperatures dropped to -13$^{\circ}C$ and were, therefore not damaging to the seeds.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2014

The conventional Three-Stage electronic ballast is stable, but Two-Stage electronic ballast has been researching because of efficiency. Three-Stage electronic ballast is consisted of PFC circuit, buck converter, and inverter circuit, but Two-stage is consisted of PFC circuit, Buck-Inverter full bridge circuit. The Buck-Inverter full bridge inverter consists of two half bridge inverters for low frequency switching, and high frequency switching. In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. Therefore, in the Two-Stage electronic ballast which has the resonant tank for ignition, the transient resonant current because of low frequency changing is analyzed, the novel algorithm is proposed to resuce the transient current.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.659-662
• /
• 1999

As utility pollution take a growing interest, ac/dc converter optimizing utility condition has been vigorously studied in decades. In this paper three phase DCM converter is analyzed and equations for average input currents are presented. Also relationships of voltage gain & duty according to angular velocity are presented and variable frequency controller is implemented using reset integrator which is designed in detail. In result power factor and THD characteristics of 3-stage and 4-stage operation ae compared respectively.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.209-214
• /
• 1999

The purpose of this research was to investigate the permeation properties of each stage in three stage reverse osmosis system for cold-mill wastewater reuse. After construction of the three staged pilot plant which had 75% recovery and equipped with seven plate-and-frame modules, the change of each stage's penneate flow and quality were investigated in the process of membrane fouling. The order of average permeate flow was first, second, and third stage at the beginning. As the operation time passed, the permeate flow of first stage was decreased, the second stage was maintained steadily, and the third stage was increased. Accordingly, the fouling was initiated at the first stage and then progressed to the second and third stage. The first stage's permeate quality showed the best and the second and third stage was the next in that order. And the order of quality was maintained during the test periods. Therefore, the permeate quality was not affected by membrane fouling.