• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.564-571
• /
• 1998

The function of diaphragms at abutments and piers of prestressed concrete (PSC) box girder train bridge is to transfer forces from the superstructure onto bearings or column and to stiffen the superstructure cross-section against in-plane deformation. Due to large stress disturbance at diaphragm, the design for the diaphragm using conventional design method is relatively irrational than designs for other structual members. And, due to contribution to boundary condition of deck slab by the diaphragm, the behavior of deck slab near the diaphragm is different from behavior of the deck slab obtained from two dimensional analysis of the bridge, which is basis far the design of deck slab. In this paper, three dimensional behavior of deck slab near diaphragm of PSC box girder train bridge constructed by the precast span method are analyzed by using three dimensional finite element modeling. Then, strut-and-tie model is applied to design the diaphragm of PSC box girder train bridge. The modeling techniques in this paper can be applied effectively to examine the causes of cracks at deck slab near diaphragm and to design diaphragm rationally.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.211-220
• /
• 2003

As Geographic Information Systems represent three dimensional topological information, The Systems provide accurate and delicate services for users. In order to execute three dimensional topological operations, a dimensional transformation and heterogeneous spatial models should be used. However, the existing systems that use the dimensional transformation and the heterogeneous models, is not only difficult to operate the spatial operators, but also happened to support non-interoperability. Therefore, in order to solve the problems, we proposed three dimensional spatial object models that supported two dimensional object models and implemented them to show validity of the proposed models. When designing the three dimensional topological operators, we used 3DE-9IM which extended DE-9IM to support three dimensional concepts, and implemented operators on the component environment with object oriented concepts. The proposed three dimensional spatial object models and topological operators can support interoperability between systems, and execute spatial queries efficiently on three dimensional spatial objects.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.2 s.27
• /
• pp.43-49
• /
• 2005

As information has been brought to public attention, information storage as well as information usability has been important. Rural information is produced in many areas and institutions. However, it is difficult to use rural information comprehensively. Since formats for management are various, it is difficult to have unified frame. In this research, a schema of database fer integrating rural data is designed to improve usability using dimensional modeling. First of all, rural data are analyzed for designing integrated rural database schema. Rural data used are 'National Agricultural Statistics' and 'Gun annual statistical report'. Analysis shows that there are three considerations; administrative district, time-dependency and classification of data. Considering these three requisite, we designed database schema using dimensional modeling. The reason of using dimensional modeling is to improve usability and effectiveness. If the database was designed using ER modeling, many tables have to be joined every searching time. Separately from integrated rural database schema, user's database schema is designed considering usability. Through user's database, users can modify data or generate new data and save these processes. These make it possible to use generated data repeatedly. We evaluate usability, contribution, and effectiveness of data manipulation on the integrated rural database. We propose an integrated rural database structure improving the accessibility and usability of rural data and information and verified the data model based on a practical example.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.117-123
• /
• 2012

Many nations have been launched their own earth observation satellites due to much interest in space exploration. Because of this, the number of high resolution satellite are increasing day by day. With the development of web environment, general users have easy access to satellite images. The research conducted a basic study about web-based satellite photogrammetry in order to determine three dimensional coordinates easily without having profound knowledge of satellite sensor modeling. Various element technologies were analyzed to decide three dimensional coordinates by using high resolution satellite images in web environment, and case studies were conducted by using IKONOS satellite images. By applying parallel projection model, which is one of sensor modeling methods, epipolar image was created and prototype form of program that can decide three dimensional location in web environment was implemented. Through this, general users could decide three dimensional location easily in web environment and knew that already existed spatial information can be renewed and used in service area.

• Water Engineering Research
• /
• v.6 no.3
• /
• pp.101-112
• /
• 2005

This paper presents the state of the art of the CFD applications to vegetated open-channel flows. First, important aspects of the physics of vegetated flows found through the laboratory experiments are briefly reviewed. Then, previous CFD applications to one-dimensional vertical structure, partly-vegetated flows, compound open-channel flows with floodplain vegetation, and fully three-dimensional numerical simulations are reviewed. Finally, topics for further researches such as relationship between the resistance and flexural rigidity, additional drag due to foliages, and melting the experience of CFD with the depth-averaged modeling, are suggested.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.40-46
• /
• 1990

This paper introduces a geometric modelling system adopted in a newly developed preprocessor for finite element analysis of three dimensional structures. The formulation is characterized by hierarchical construction of structural model which consists of control points, curves, surfaces and solids. Various surface and solid modeling schemes based on blending functions and boundary representation are systematized for finite element mesh generation. The modeling system is integrated with model synthesis and operations which facilitate modelling of complex structures.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.443-450
• /
• 2022

This study developed a three-dimensional helmet mold design software that can design helmets for treating the infant plagiocephaly (flat head syndrome) using three-dimensional head scan data. For this, the three-dimensional head data of sixth SizeKorea body measurement project as well as the data produced by a head modeling software were used to prepare the head shape data of plagiocephaly patients. A total of 14 landmarks and 10 dimensions of heads required for helmet mold shape design and plagiocephaly diagnosis were automatically measured using an anthropometric analysis software. Using the software developed in this study, plagiocephaly can be diagnosed not only visually by three-dimensional head data visualization but also quantitatively by calculating the medically defined indices such as cranial index, which measures the proportions of the head, and the cranial vault asymmetry index, which measures the asymmetry of the head. The basic shape of the helmet mold was automatically generated based on the head scan data. Additionally, it is possible to fine tune the shape of the mold to reflect individual characteristics by using a free form deformation technique. Finally, the designed helmet mold was converted into the data that can be printed on a three-dimensional printer for generating the actual prototype.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.43-52
• /
• 1990

Theoretical foundation and algorithms are presented of a new surface modeling and pre-processing system for the three-dimensional structures. The modeling method is based on the boundary representation scheme and composed of two hierarchical model structures: curve-network and surface models. The concept of modeling curve as a union of links is introduced to facilitate surface modeling via various transfinite mapping techniques or Coons Patches. Efficiency and novel aspects of the present method are discussed. Finite element mesh genceration and application procedures will be reported in a later paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.612-614
• /
• 2018

Today, technologies that can acquire modeling data by using image are emerging. That 3D modeling production method, which is frequently utilized in contents industries, creates modeling data by using creator's intuitive sense, with drawings sketched without accurate measurement tools is also true. Recently, technologies that can facilitate modification and amendment of existing design by producing and reorganizing three-dimensional data of a sculpture through combination of image information are developing. This thesis gives suggestion of how to utilize and study the way to produce accurate three-dimensional modeling data by utilizing multiple image data.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.60-69
• /
• 2010

Outfitting systems in marine vessels have many kinds of standard parts. Ship CAD system should support the designers with an efficient tool for the modeling of outfitting parts such as pipes and valves. We develop a practical procedure for a part master model that combines ship CAD systems with the industrial standard. Part master or catalogue database of standard equipments is included in the database of ship CAD. The part master makes the associations of three dimensional modeling with the industrial standard. Moreover, it reflects the automatic modeling to maintain attributes that are disclosed in the entity of each part master in order to reduce the modeling time. Entity and attributes of pipe and valves are chosen from JIS(Japanese Industrial Standards) in order to explain the proposed procedure. Suggested procedure explains that three dimensional model of equipment is generated by parsing the pre-defined attributes after the entities of part masters is stored in database.