• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.533-537
• /
• 2003

Compared to sintered polycrystalline diamond (PCD), the deposited thin film diamond has a great advantage on the fabrication of cutting tools with complex geometries such as drills. Because of high performance in high speed machining non-ferrous difficult-to-cut materials in the field of automobiles industry, aeronautics and astronautics industry, diamond-coated drills find large potentialities in commercial applications. However, the poor adhesion of the diamond film on the substrate and high surface roughness of the drill flute adversely affect the tool lift and machining quality and they become the main technical barriers for the successful development and commercialization of diamond-coated drills. In this paper, diamond thin films were deposited on the commercial WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple coating technology based on changing gas pressure in different process stages was developed. The large triangular faceted diamond grains may have great contribution to the adhesive strength between the film and the substrate, and the overlapping ball like blocks consisted of nanometer sized diamond crystals may contribute much to the very low roughness of diamond film. Adhesive strength and quality of diamond film were evaluated by scanning electron microscope (SEM), atomic force microscope (AFM), Raman spectrum and drilling experiments. The ring-block tribological experiments were also conducted and the results revealed that the friction coefficient increased with the surface roughness of the diamond film. From a practical viewpoint, the cutting performances of diamond-coated drills were studied by drilling the SiC particles reinforced aluminum-matrix composite. The good adhesive strength and low surface roughness of flute were proved to be beneficial to the good chip evacuation and the decrease of thrust and consequently led to a prolonged tool lift and an improved machining quality. The wear mechanism of diamond-coated drills is the abrasive mechanical attrition.

• 한국동물학회지
• /
• 제15권3호
• /
• pp.133-147
• /
• 1972

고추잠자리(Crocothemis servilia Drury)의 精子完成過程을 究明하기 爲하여, 本 硏究에 着手한 바, 다른 無脊椎動物의 精子完成過程에서 이미 밝혀진 構造들과 比較해 가면서 特殊한 分化相을 觀察한 結果, 첫째 核의 染色質이 漸次 濃縮되기 始作함에 따라서 核의 모양도 球形에서 楕圓形으로, 楕圓形에서 圓錐形으로 變하였으며 둘째로 核이 細胞의 一極端으로 移動하고 核의 尾部가 陷入되며 셋째 中心粒이 核 陷入 部位에 位置하여 여기에서부터 軸　가 形成된다. 넷째는 골지體에서 起因된 尖體顆粒은 核의 先端으로 移動되어 결국 尖體를 形成하게 된다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1014-1019
• /
• 2001

The diamond thin film was deposited on Si(100) substrate from$CH_3OH/H_2O$mixtured gas using a hot filament chemical vapor deposition(HFCVD) method. The deposition condition for samples has been varried with the$CH_3OH/H_2O$composition. Scanning electron microscopy(SEM) and Raman spectroscopy has been employed for the sample analysis. The diamond sample has been obtained below 20Pa with$CH_3OH/H_2O$mixtured gas. The crystallinity of diamond film improved as the composition $CH_3OH$decreases from 60Vol% to 52Vol%, and the sample structure changed from the cauliflower to the diamond structure. But the sample structure was becomes cauliflower at 50Vol% of in$CH_3OH$ in the $CH_3OH/H_2O$. It was shown that the$CH_3OH$ has threshold composition.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1061-1070
• /
• 2003

A triple flame in a mixing layer was studied experimentally with concentration gradient and mean velocity by using a multi-slot burner, which can stabilize the lift-off flame. Flame stabilization condition, lift-off heights, and some other characteristics were examined for methane and propane flame within a range of very low concentration gradient. Pitot-tube and LDV(Laser Doppler Velocimetry) were used for velocity. Mass spectroscopy and Rayleigh scattering signal were used for concentration gradients. Thermo-couples and SiC TFP(Thin Filament Pyrometer) were used for temperature. It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity and this means that the propagation velocity has a maximum value. The scales of flame to the burner nozzle and intensity variation of the diffusion flame were suspected as the cause.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.164-169
• /
• 2009

Study on swimming of microorganisms like, sperm motility, cilia beating, bacterial flagellar propulsion has found immense significance in the field of biological fluiddynamics. Because of the complexity involved, it is challenging for the researchers to model such problems. Immersed boundary method has proved its efficacy in the field of biological fluiddynamics, The present work aims at performing a numerical study on the microorganism locomotion using the immersed boundary method proposed by Peskin[1]. A two-dimensional model of the microorganism is modeled as thin elastic filament described as a sine wave. The neutrally buoyant organism undergoing deformations is immersed in a viscous and incompressible fluid. The fluid quantities are described using Eulerian coordinates and the immersed body is represented by Lagrangian coordinates. The Eulerian and Lagrangian variables are connected by the Dirac delta function. The Navier-Stokes equations governing the fluid flow are solved using the fractional step method on a staggered Cartesian grid system. The developed numerical code in FORTRAN will be validated by comparing the numerical results with the available results.

• 한국연소학회지
• /
• 제7권4호
• /
• pp.1-9
• /
• 2002

The morphology of deposits on $15-{\mu}m$ thin SiC filaments has been investigated with SEM and compared with UV-excited laser induced broadband fluorescences in co-flowing, propane laminar diffusion flames in a reduced oxidizer environment. The homogeneous morphology of droplet-like deposits inner flame zone and the agglomeration of condensed-phase deposits and the transition to soots from grown up droplet-like precursors with approaching the flame surface can be observed in a barely sooting flame. The average size of the mature soots deposited in the luminous flame edge is scarcely dependent on their axial position in a confined flame under reduced oxidizer condition. A double structure of PAH fluorescence is observed in near-extinction flames with further decreasing of oxidizer. A comparison of the PAH fluorescence with the morphologies of deposits indicates that appearance of the "dark" hollow zone is caused by a decreased number density of developed liquid-phase large molecules and the outer weak fluorescence zone is caused by the diffusion of gas-phase small molecules.

• Biomolecules & Therapeutics
• /
• 제18권4호
• /
• pp.442-447
• /
• 2010

This study was conducted to determine whether treatment with the anti-inflammatory eupatilin influences intestinal smooth muscle contraction stimulated by carbachol and, if so, to investigate the related mechanism. Denuded ileal or colonic muscles from Sprague-Dawley rats were used for the study and measurements of isometric contractions were obtained using a computerized data acquisition system; this data was also combined with results from molecular experiments. Eupatilin from Artemisia asiatica Nakai significantly decreased carbachol-induced contractions in both ileal and colonic muscles. Interestingly, eupatilin decreased carbachol-induced phosphorylation of ERK1/2 more significantly than that of MYPT1 at Thr855 in ileal and colonic muscles. However, eupatilin significantly decreased phosphorylation of MYPT1 at Thr855, but only in ileal muscle. Therefore, thin filament regulation, including MEK inactivation and related phospho-ERK1/2 decrease, is mainly involved in the eupatilin-induced decrease of intestinal contraction induced by carbachol. In conclusion, this study provides the evidence and a possible related mechanism concerning the inhibitory effect of the flavonoid as an antispasmodic on the agonist-induced contractions in rat ileum and colonic muscles.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.144-147
• /
• 2017

In this study, $Ge_2Sb_2Te_5$ and $Ge_8Sb_2Te_{11}$ were used as an insulator layer to fabricate ReRAM devices. The resistance change is correlated to the appearance or disappearance of a conductivity filament at the surface of the GeSbTe layer. Changes in the electrical properties of ITO/GeSbTe/Ag devices were measured using a I-V-L measurement system. As a result, compared to the $ITO/Ge_8Sb_2Te_{11}/Ag$ device, this $ITO/Ge_2Sb_2Te_5/Ag$ ReRAM device exhibits highly uniform bipolar resistive switching characteristics, such as the operating voltages, and the resistance values.

• 융합정보논문지
• /
• 제10권10호
• /
• pp.109-114
• /
• 2020

이번 연구는 소화기계 출혈, 궤양 등에 대해 치료와 예방을 목적으로 사용되는 rebamipide에서 농도 의존적 장관 수축성 조절 기전에 대해 조사하고자 한다. 소화기 수축은 근육의 섬유의 조절에 의하여 일어난다. 실험용 쥐의 회장 과 결장을 적출하여 carbachol로 회장 과 결장의 근육수축을 유발하여 연구를 진행하였다. rebamipide 단독으로 장관수축을 억제하지 않고 소폭으로 carbachol 유도 수축을 높이는 것으로 관찰되었다. 소화기계 부작용을 일으키는 indomethacin 과 rebamipide를 흔히 병용하기에, 병용 효과를 관찰하였다. Indomethacin과 병용된 rebamipide는 장관 중 회장의 수축성을 증대시켰다. rebamipide는 장관중 회장에서 수축성을 증대시키고, NSAIDs에 의한 궤양에 대한 항궤양효과 외에 운동성도 일부 조절하는 것으로 생각된다.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.121-125
• /
• 1999

Vertically well aligned multiwall carbon nanotubes were grown on nickel coated different substrates by plasma enhanced hot filament chemical vapor deposition at low temperatures below 650$^{\circ}C$. Acetylene and ammonia gas were used as the carbon source and a catalyst. The surface roughness of nickel layer increased as NH3 etching time increased. The diameters of the nanotubes decreased and the density of nanotubes increased as NH3 etching time increased. diameter of nanotube was 30 to 70 nm. Nickel cap was observed on the top of the grown nanotube and very thin carbon amorphous layer was fonde on the nickel cap.