• Applied Microscopy
• /
• 제47권4호
• /
• pp.226-232
• /
• 2017

Electron microscopy and X-ray diffraction have together played a key role in our understanding of the molecular structure and mechanism of contraction of muscle. This review highlights the role of electron microscopy, from early insights into thick and thin filament structure by negative staining, to studies of single myosin molecule structure, and finally to recent high-resolution structures by cryo-electron microscopy. Muscle filaments are designed for movement. Their labile structures thus present challenges to obtaining near-atomic detail, which are also discussed.

• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.39-45
• /
• 2006

The aim of this work is to develop sense-differentiated textiles using Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The ITY(Interlace Textured Yarn) using T-T yarn with various over feed ratios of PET filament was manufactured with different shrinking percentage of core yarn and then the fabrics were woven on the same weaving 100m using ITY produced. The mechanical properties and the handles of the fabrics were examined with KES-FB system suggested by Kawabata. The shrinkage of ITY was increased with decreasing over feed ratio and increased with increasing heat treatment temperature of T-T yarn. The initial elasticity modulus of ITY was decreased with increasing over feed ratio and heat treatment temperature of T-T yarn. The tensile energy of fabrics was decreased with increasing of over feed ratio, but bending rigidity and shear rigidity of fabrics were increased with increasing of over feed ratio of PET filament. The results indicate that the fabric using T-T yarn with finer than I denier mono filament can be used for the purpose of sense-differentiated textile.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.87-92
• /
• 2006

The characteristic of interface layer and the effect of bias voltage on the microstructure of c-BN films were studied in the microwave plasma hot filament C.V.D process. c-BN films were deposited on a high speed steel(SKH-51) substrate by hot filament CVD technique assisted with a microwave plasma to develop a high performance of resistance coating tool. c-BN films were obtained at a gas pressure of 20 Torr, vias voltage of 300 V and substrate temperature of $800^{\circ}C$ in $B_2H_6-NH_3-H_2$ gas system. It was found that a thin layer of hexagonal boron nitride(h-BN) phase exists at the interface between c-BN layer and substrate.

• Entomological Research
• /
• 제48권5호
• /
• pp.429-438
• /
• 2018

Fine structural characteristics of the cardiac muscle and its sarcomere organization in the black widow spider, Latrodectus mactans were examined using transmission electron microscopy. The arrangement of cardiac muscle fibers was quite similar to that of skeletal muscle fibers, but they branched off at the ends and formed multiple connections with adjacent cells. Each cell contained multiple myofibrils and an extensive dyadic sarcotubular system consisting of sarcoplasmic reticulum and T-tubules. Thin and thick myofilaments were highly organized in regular repetitive arrays and formed contractile sarcomeres. Each repeating band unit of the sarcomere had three apparent striations, but the H-zone and M-lines were not prominent. Myofilaments were arranged into distinct sarcomeres defined by adjacent Z-lines with relatively short lengths of $2.0{\mu}m$ to $3.3{\mu}m$. Cross sections of the A-band showed hexagon-like arrangement of thick filaments, but the orbit of thin filaments around each thick filament was different from that seen in other vertebrates. Although each thick filament was surrounded by 12 thin filaments, the filament ratio of thin and thick myofilaments varied from 3:1 to 5:1 because thin filaments were shared by adjacent thick filaments.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.42-48
• /
• 2006

The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2002년도 추계 수산관련학회 공동학술대회발표요지집
• /
• pp.118-119
• /
• 2002

근육이 수축하면 근원섬유의 sarcomere (근절)의 길이가 경직의 진행과 함께 짧아지는 것을 볼 수 있다. 즉, thick filament (myosin filament)와 thin filament (actin filament) 사이에서로 미끌어져 들어가는 현상이 일어나게 되는 것이다. 골격근은 보통 때는 이완상태에 있으나 필요할 때 신경자극에 의해서 수축을 하게 된다. 이러한 수축↔이완의 전환은 세포내의 $Ca^{2+}$ 농도의 조절을 통해서 제어되며, 이완시의 세포질 내의 $Ca^{2+}$ 농도는 정도의 낮은 상태로 유지된다. (중략)

• 복식
• /
• 제56권1호
• /
• pp.32-43
• /
• 2006

Excavated fabrics from Papyeung-yun's tomb totals at 208 in their numbers. They comprised 118 pieces of silk tabby(紬), 16 pieces of thin silk tabby, 8 pieces of thin filament silk tabby (絹), 43 pieces of satin damask(段), 8 pieces of compound satin(金線), 1 piece of twill(綾), 1 piece of complex gauze(羅), l piece of simple gauze(紗), 4 pieces of cotton(綿布), 4 pieces of hemp(麻布) and 3 pieces of ramie(苧布). As shown in the preceding list, $95\%$ of all the items are weaved from silk. To list a few characteristics of excavated fabrics from Papyoung-Yun's lineage, there are A vivid gold-colored compound satin, a uniquely patterned satin damask, various silk tabbies, and 4-end complex gauze of Neoul that is women's head cover. To note, names of the fabrics used in this article are based on the information from the literatures and are as following silk tabby(紬), thin silk tabby, filament silk tabby(絹), satin damask(段), compound satin(金線), complex gauze(羅), simple gauze(紗), cotton(綿布), twill(綾), hemp(麻布)and ramie(苧布).

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.41-45
• /
• 2021

본 연구에서는 멤리스터 소자의 높은 신뢰성을 확보하기 위해 소자 제작 단계에서 30 nm 두께의 ZrO₂ 금속산화물 박막 위 국부영역에 리튬 filament seed 층을 패턴하여 작은 이온반경의 리튬이온을 저항변화 주체로 활용하는 멤리스터 소자를 구현하였다. 패턴 된 리튬 filament seed 대비 다양한 상부전극의 면적을 적용하여 멤리스터-커패시턴스 병렬 구조의 이온형 저항변화 소자에서 커패시턴스가 filament type 저항변화 특성에 미치는 영향을 조사하고자 하였다. 이를 위해 ZrO₂ 박막 위에 5 nm 두께, 5 ㎛ × 5 ㎛ 면적의 리튬 filament seed 증착 후 50 ㎛, 100 ㎛ 직경의 상부전극을 증착, 리튬 메탈의 확산을 위한 250℃ 열처리 전 후 샘플에서 저항변화 특성을 확인하였다. 열확산에 의해 형성된 전도성 filament의 경우 전압에 의한 제어가 불가함을 확인하였으며, 전압에 의해 형성된 filament만이 electrochemical migration에 의한 가역적 저항변화 특성 구현이 가능한 것을 확인하였다. 전압에 의한 filament 형성 시 병렬로 존재하는 커패시턴스의 크기가 filament의 형성 및 소실에 중요한 인자임을 확인하였다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.89-93
• /
• 2012

c-BN films were deposited on SKH-51 steels by electron assisted hot filament CVD method and microstructure development was studied processing parameters such as bias voltage, temperature, etching and phase transformation at boundary layer between BN compound and steel to develop a high performance wear resistance tools. A negative bias voltage higher than 200V at substrate temperature of $800^{\circ}C$ and gas pressure of 20 torr in B2H6-NH3-H2 gas system was one of optimum conditions to produce c-BN films on the SKH-51 steels. Thin layer of hexagonal boron nitride phase was observed at the interface between c-BN layer and substrate.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.66-67
• /
• 2003