• Computers and Concrete
• /
• v.11 no.4
• /
• pp.271-289
• /
• 2013

In this research, a developed microstructural model of cement particles was presented to describe the cement hydration procedure. To simplify the hydration process, the whole hydration was analyzed in a series of sub-steps. In each step, the hydration degree, as well as the microstructural size of the hydration cell, was calculated as a function of the radius of the unreacted cement particles. With the consideration of the water consumption and the reduction of the interfacial area between water and hydration products, the micro-level expressions of the cement hydration kinetics were established. Then the heat released and temperature history of the concrete was carried out with the hydration degree obtained from each sub-steps. The equivalent age method based on the Arrhenius law was introduced in this research. Based on the equivalent age method, a maturity model was applied to describe the evolution of the mechanical properties of the material during the hydration process. The finite element program ANSYS was used to analyze the temperature field in concrete structures. Then thermal stress field was calculated using the elasticity modulus obtained from code formulate. And the risk of thermal cracking was estimated by the comparison of thermal stress and concrete tensile strength.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.483-493
• /
• 2018

Experimental study of the deterioration of high-temperature rock subjected to rapid cooling is essential for thermal engineering applications. To evaluate the influence of thermal shock on heated granite with different temperatures, laboratory tests were conducted to record the changes in the physical properties of granite specimens and the dynamic mechanical characteristics of granite after rapid cooling were experimentally investigated by using a split Hopkinson pressure bar (SHPB). The results indicate that there are threshold temperatures ($500-600^{\circ}C$) for variations in density, porosity, and P-wave velocity of granite with increasing treatment temperature. The stress-strain curves of $500-1000^{\circ}C$ show the brittle-plastic transition of tested granite specimens. It was also found that in the temperature range of $200-400^{\circ}C$, the through-cracks induced by rapid cooling have a decisive influence on the failure pattern of rock specimens under dynamic load. Moreover, the increase of crack density due to higher treatment temperature will result in the dilution of thermal shock effect for the rocks at temperatures above $500^{\circ}C$. Eventually, a fitting formula was established to relate the dynamic peak strength of pretreated granite to the crack density, which is the exponential function.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.4
• /
• pp.207-213
• /
• 2018

Not only efficiency of chlorine evolution reaction (CER) but also durability namely service life is very important property in dimensional stable anode for Ballast Water Management System (BWMS) for marine ships. Many researchers have been focused on improving efficiency of CER by controlling composition, phase and surface area for a long time, but the efforts to increase durability was relatively small. In this study, we have investigated the effect of $TiO_2$ protective interlayers on efficiency and durability of DSA electrodes. $TiO_2$ protective interlayers were prepared by thermal oxidation at 500, 600 and $700^{\circ}C$ on Ti substrate. And then the DSA electrodes consisting of $Ti/RuO_2-PdO-TiO_2$ were prepared by thermal decomposition method on $TiO_2$ interlayers. The efficiencies of CER of DSA electrodes without $TiO_2$ interlayer and with $TiO_2$ interlayer grown at 500, 600 and $700^{\circ}C$ were 94.19, 94.45, 84.60 and 76.75% respectively. On the otherhand, durabilities were 30, 55, 90 and 65 hours respectively. In terms of industrial aspect, the performance of DSA is considered high efficiency and durability which can correspond to total production of chlorine. If we considered the performance index of DSA as the product of efficiency and durability, performance indices could be recalculated as 28.26, 50.85, 76.14 and 49.89 respectively. As the thermal oxidation temperature increasing, life time were increased remarkerbly, while efficiency of CER was decreased slightly. As a result, DSA electrode with $TiO_2$ interlayer grown at $600^{\circ}C$ has shown about 2.7 times performace of original DSA electrode without $TiO_2$ interlayer.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.88-94
• /
• 2021

The seaweed, Gracilaria verrucosa (red seaweed) was fermented to produce bioethanol. Optimal thermal acid hydrolysis conditions were determined as 200 mM H₂SO₄ and 10% (w/v) seaweed slurry at 130℃ for 60 min yielding 47.5% of pretreatment efficiency (E_p). After the thermal acid hydrolysis, enzymatic saccharification was carried out with 16 U/ml Viscozyme L, Cellic CTec2 or mixture of Viscozyme L and Cellic CTec2 to G. verrucosa hydrolysates. Enzymatic saccharifications with Viscozyme, Cellic CTec2 or mixture of those yielded 7.3 g/l glucose with efficiency of saccharification, E_s = 34.9%, 11.6 g/l glucose with E_s = 64.4% and the mixture of those 9.6 g/l glucose with E_s = 56.6%, respectively. Therefore, based on the E_s value, Cellic CTec2 was selected for the optimal enzyme for enzymatic saccharification of G. verrucosa hydrolysate. The ethanol productions with non-adapted S. cerevisiae CEN-PK2 (wild type) and S. cerevisiae CEN-PK2 with adaptive evolution to galactose produced 8.5 g/l ethanol with Y_EtOH = 0.19 and 21.5 g/l ethanol with Y_EtOH = 0.50 at 144 h, respectively. From these results, the ethanol production by S. cerevisiae with adaptive evolution showed high concentration of ethanol production using G. verrucosa as a substrate.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1863-1872
• /
• 2006

In FMS (Flexible Manufacturing System) and CIM (Computer Integrated Manufacturing), machine-tools have been the target of integration in the last three decades. The conventional concept of integration is being changed into the autonomous manufacturing device based on the knowledge evolution by applying advanced information technology in which an open architecture controller, high-speed network and internet technology are included. In the advanced environment, the machine-tools is not the target of integration anymore, but has been the key subject of cooperation. In the near future, machine-tools will be more improved in the form of a knowledge-evolutionary intelligent device. The final goal of this study is to develop an intelligent machine having knowledge-evolution capability and a management system based on internet operability. The knowledge-evolutionary intelligent machine-tools is expected to gather knowledge autonomically, by producing knowledge, understanding knowledge, reasoning knowledge, making a new decision, dialoguing with other machines, etc. The concept of the knowledge-evolutionary intelligent machine is originated from the machine control being operated by human experts' sense, dialogue and decision. The structure of knowledge evolution in M2M (Machine to Machine) and the scheme for a dialogue agent among agent-based modules such as a sensory agent, a dialogue agent and an expert system (decision support agent) are presented in this paper, with intent to develop the knowledge-evolutionary machine-tools. The dialogue agent functions as an interface for inter-machine cooperation. To design the dialogue agent module in an M2M environment, FIPA (Foundation of Intelligent Physical Agent) standard platform and the ping agent based on FIPA are analyzed in this study. In addition, the dialogue agent is designed and applied to recommend cutting conditions and thermal error compensation in a tapping machine. The knowledge-evolutionary machine-tools are expected easily implemented on the basis of this study and shows a good assistance to sensory and decision support agents.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1540-1555
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect its stress conditions, mechanical behavior and thermal-hydraulic performance. A reliable numerical method is of great importance to reveal the complex evolution of mechanical deformation, flow redistribution and temperature field for the plate-type fuel assembly under non-uniform irradiation. This paper is the first part of a two-part study developing the numerical methodology for the thermal-fluid-structure coupling behaviors of plate-type fuel assembly under irradiation. In this paper, the thermal-fluid-structure coupling methodology has been developed for plate-type fuel assembly under non-uniform irradiation condition by exchanging thermal-hydraulic and mechanical deformation parameters between Finite Element Model (FEM) software and Computational Fluid Dynamic (CFD) software with Mesh-based parallel Code Coupling Interface (MpCCI), which has been validated with experimental results. Based on the established methodology, the effects of non-uniform irradiation and fluid were discussed, which demonstrated that the maximum mechanical deformation with irradiation was dozens of times larger than that without irradiation and the hydraulic load on fuel plates due to differential pressure played a dominant role in the mechanical deformation.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.279-286
• /
• 2012

Microstructure tailoring of filler loaded preceramic polymer systems offers a high potential for property improvement of Si-based ceramics and composites. Advancements in manufacturing of bulk materials by controlling microstructure evolution during thermal induced polymer-ceramic transforma-tion and polymer-filler reactions will be presented. Rate controlled pyrolysis, multilayer gradient laminate design and surface modification by gas solid reaction are demonstrated to yield ceramic components of high fractional density and superior mechanical properties. Emerging fields of applications are presented.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.939-944
• /
• 2001

Genetic algorithm is modelled on natural evolution and simulated annealing is based on the simulation of thermal annealing. Both genetic algorithm and simulated annealing are stochastic method. So they can find global optimum values. For compare efficiency of SA and GA's, some function value was maximized. In the result, that was a little better than GA's.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.168-170
• /
• 2007

Sn-Bi eutectic solder alloy have is good wetting and physical properties. The results of solder paste properties test, melting point is about $139^{\circ}C$ and spread test is represent spread properties of $7{\sim}16%$. The results of shear strength after as reflowed, thermal shock test, high temperature storage test of 500hr and 1000hr at $100^{\circ}C$. The shear strength value range is from 6000 to 11000gf, pull strength value range is from 2200 to 3300gf.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.46-53
• /
• 1984

The analysis of temperature distribution and change of metallic structures during water quench were presented by finite element method. In temperature calculation the equation of unsteady state hear conduction problem considering latent heat due to phase transformation was applied to finite solid cylinder, SM 45C of 40mm diameter and 40mm height. In metallic structure analysis iso-thermal transformation curve and the equations of evolution in pearlite-martensite transformation were applied. The calculated results upon temperature and metallic structures were agreed with those of experimental observations.