• Structural Engineering and Mechanics
• /
• v.34 no.3
• /
• pp.285-300
• /
• 2010

The two-dimensional deformation of a homogeneous, isotropic thermoelastic half-space with voids with variable modulus of elasticity and thermal conductivity subjected to thermomechanical boundary conditions has been investigated. The formulation is applied to the coupled theory(CT) as well as generalized theories: Lord and Shulman theory with one relaxation time(LS), Green and Lindsay theory with two relaxation times(GL) Chandrasekharaiah and Tzou theory with dual phase lag(C-T) of thermoelasticity. The Laplace and Fourier transforms techniques are used to solve the problem. As an application, concentrated/uniformly distributed mechanical or thermal sources have been considered to illustrate the utility of the approach. The integral transforms have been inverted by using a numerical inversion technique to obtain the components of displacement, stress, changes in volume fraction field and temperature distribution in the physical domain. The effect of dependence of modulus of elasticity on the components of stress, changes in volume fraction field and temperature distribution are illustrated graphically for a specific model. Different special cases are also deduced.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.10-15
• /
• 2001

Generally, it is said that the heat generation of air bearing is negligible. But the air bearing using at the built-in spindle is different from the general air bearing itself because of the thermal effects from the spindle motor and high-speed conditions. In this paper, in order to analysis the characteristics of air bearing by the heat, We made easy -heating-bearing-system (EHBS) and hard-heating-bearing-system (HHBS) and could identify the changes between the two bearing systems from the experiments and simulation. When spindle system reached at thermal steady-state, the changes means that the stiffness of air bearing becomes change due to the clearance change between bearing and journal. It is shown that the temperature rise and thermal effects to cause the thormal expansions have to be considered when designing air spindle system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.681-684
• /
• 2002

To investigate thermal effects of silicon field emitter, we fabricated and characterized single silicon tips with various tip radii, which generate different joule heating. Through I-V and stability tests, the changes of emission characteristics and tip structures due to different tip heating were observed and discussed. From the results, we confirmed that the changes of emission characteristics due to thermal effects in silicon emitter could occur at relatively small emission currents and concluded that the thermal effects should be also considered under normal operation condition above 1 ${\mu}A$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.133-134
• /
• 2005

When Power MOSFET is operated, it causes lots of heat, which influences negatively on the characteristics of the devices and shorten the lifespan of them. Therefore, a heat sink should be mounted on to emit the heat. In this experiment, we've found the changes of the characteristics of Thermal Transient of MOSFET when a heat sink is applied. In addition, we've found other changes when heat sink compound is applied as well.

• Journal of Environmental Science International
• /
• v.13 no.5
• /
• pp.449-467
• /
• 2004

Interannual and decadal scale changes in body size of Pacific saury, catch and catch per unit effort were examined to investigate the environmental effects on the stock structure and abundance in the Tsushima Warm Current region. Interannual changes in thermal conditions are responsible for the different occurrence (catch) rates of sized group of the fish. Changes in body size due to environmental variables lead the stock to be homogeneous during the period of high abundance, while one of the reminder cohorts supports the stock during the period of low level of abundance. Migration circuits of two cohorts of saury stock are hypothesized on the basis of short life span and spatio-temporal changes of the stock structure in normal environmental conditions. Changes in upper ocean structure and production cycles by the decadal scale climate changes lead changes in stock structure and recruitment, resulting in the fluctuation of saury abundance. Hypothesized mechanism of the effects of climate changes on stock structure and abundance is illustrated on the basis of changes in thermal regime and production cycle.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.320-326
• /
• 2013

In this study, various polyimide films were synthesized via low temperature cure in order to understand changes in their physical properties when using 4,4'-oxydianiline (ODA) as a diamine and dianhydride molecules with different backbones on a single diamine such as 4,4'-Oxydiphthalic anhydride (ODPA), 4,4-hexafluoroisopropylidene diphthalic dianhydride (6FDA), and 3,3', 4,4'-benzophenone tetracarboxylic dianhydride (BTDA). After the synthesis of poly(amic acid), polyimide films were fabricated by adding 1,4-diazabicyclo [2.2.2]octane (DABCO), a low-temperature catalyst, at various wt% to poly(amic acid)s. Changes of optical and thermal properties were compared and analyzed between polyimide films without catalyst and polyimide films with catalyst by FT-IR, UV-Vis transmittance, DSC/TGA, and WAXD analysis. Wide-angle X-ray diffraction (WAXD) analysis revealed that the mean intermolecular distance decreased with the use of a catalyst by the type of dianhydride. Thus, while the optical properties of the films improve by a low-temperature cure performed using a catalyst, their thermal properties decrease. These changes can be explained by the changes in the morphological structure of the films triggered by a catalyst-induced reduction in the mean intermolecular distance. Moreover, the results show that the type of dianhydride determines the degree of change in the optical and thermal properties in each types of polyimide, demonstrating that changes in the optical and thermal properties are directly associated with the backbone of the polyimide structure.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.41-48
• /
• 2016

To investigate the effect of long-term thermal aging on the microstructural and mechanical characteristics of weldment made of nickel base alloy and its weld metal, an accelerated heat treatment was applied to simulate the process of long-term thermal aging in the operating condition of nuclear power plant. A representative nickel-based weldment with Alloy 600 and Alloy 182 was fabricated and heat-treated at $400^{\circ}C$ for 1,713 h and 3,427 h to simulate the thermal aging for the period equivalent to 15 and 30 years in operating pressurized water reactors, respectively. The microstructural and mechanical characteristics were analyzed by using optical microscopy, scanning electron microscopy and Vickers microhardness measurement. Changes were observed in precipitation behavior and microhardness of each specimen, and these changes were mainly attributed to the change in precipitated morphology and residual stress across the weld during the thermal aging process.

• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.51-59
• /
• 2013

This study aims to improve the thermal comfort level of detached housing area by reducing the impact of thermal environment. The study focused on reducing surface temperature that is generated in buildings and adjacent spaces as a result of sensible heat load and presented a proposal on implementing planting method considering its outdoor condition and structure and composed materials. To perform the study, we utilized 3D-CAD to examine the outdoor condition and structure and composed materials that impact on surface temperature and conducted space design after reflecting climatic elements in simulations. The result is as follows. In reviewing temperature distribution of Heat Island Potential (HIP) of buildings and adjacent spaces, in case where green coverage ratio is increased, there was a $6^{\circ}C$ temperature difference and in regard to changes in the thermal environment in detached housing area, in case where rooftop planting, surface improvement, planting, and overall green coverage ratio is increased, there was a $10^{\circ}C$ temperature difference. In addition, there was difference in temperature in detached housing area following the changes in wind.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1336-1341
• /
• 2009

Quantitative changes in functional constituents of waxy corn (Zea mays L.) by 5 different thermal pretreatments, including roasting, steaming, microwave, puffing, and extruding, were determined and compared with those of the raw waxy corn. There were no significant differences in fatty acid compositions among the corn treated with 5 thermal treatments. Levels of $\alpha$- and $\gamma$-tocopherols, soluble amino acids, and phytosterols decreased by thermal treatments, while those of p-coumaric and ferulic acids considerably increased by thermal treatments. In particular, the contents of tocopherols and phytosterols, and souble amino acid decreased significant in the steaming and puffing processes, respectively, whereas those of 2 free cinnamic acids increased significantly in the steaming and puffing processes. The extruding process showed smaller quantitative changes in tocopherols, phytosterols, and hydroxycinnamic acid derivatives compared to other heat pretreatments. These results suggest that the extruding process have a positive effect on valuable phytochemicals in waxy corn.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.439-442
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kinds of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost the same as that of no thermal stressed TN cells. However, the thermal stressed TN cells have many defects. Also, threshold voltage and response time of thermal stressed TN cells show the same performances as no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface shows decrease of characteristics as increasing thermal stress time. Therefore, the thermal stability of TN cell was decreased by high thermal stress for the long times.