• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.261-265
• /
• 2004

This paper proposes a fuzzy dual method for analyzing long-term transmission system expansion planning problem considering ambiguities of the power system using fuzzy lineal programming. Transmission expansion planning problem can be formulated integer programming or linear programming with minimization total cost subject to reliability (load balance). A long-term expansion planning problem of a grid is very complex, which have uncertainties fur budget, reliability criteria and construction time. Too much computation time is asked for actual system. Fuzzy set theory can be used efficiently in order to consider ambiguity of the investment budget (economics) for constructing the new transmission lines and the delivery marginal rate (reliability criteria) of the system in this paper. This paper presents formulation of fuzzy dual method as first step for developing a fuzzy Ford-Fulkerson algorithm in future and demonstrates sample study. In application study, firstly, a case study using fuzzy integer programming with branch and bound method is presented for practical system. Secondly, the other case study with crisp Ford Fulkerson is presented.

• 대한전기학회논문지
• /
• 제37권2호
• /
• pp.73-79
• /
• 1988

A fault current in Simultaneous faults is calulated, which satisfies the reliability for expansion of power scale. New algorithm for analyzing fault current is developed, which calculates exactly thevnin equivalent impedance from fault point by cecomposing increment bus admittance matrix ( Ybus), and fault current is calculated by applying multiport theory. The signeficant results are as follows ` 1) When system fault changes system configulation, equivalent impedance can be calculated simply with this new algorithm. 2) Mutual coupling of transmission line can be calculated efficiently. 3) Simultaneous fault current is analyzed by applying multiport theory, which can be applicable to large scale systems.

• 한국전자파학회논문지
• /
• 제19권1호
• /
• pp.15-22
• /
• 2008

본 논문에서는 전송 선로 이론을 기반으로 분산형 증폭기의 역방향 전류 성분을 수식적으로 분석하고, 역방향 전류 성분을 상쇄시켜 최소화하기 위한 최적의 전송 선로의 길이를 구하는 방법을 제시하였다. 기존의 설계방법에서는 역방향 전류 성분을 종단 부하를 통해 단순히 소모시키는 형태이므로 게이트와 드레인 전송 선로의 길이 결정 기준이 설계상에서 뚜렷하게 주어져 있지 않았지만, 제안하는 방법에서는 역방향 전류 성분들이 서로 상쇄가 일어나도록 하는 전송 선로의 길이를 결정하는 이론적 바탕을 제시함으로써 좀 더 체계적인 설계 방법을 제시하고 있다. 제안하는 이론의 검증을 위하여 회로 시뮬레이션을 수행하였고, pHEMT 트랜지스터를 이용하여 차단 주파수가 3.6 GHz인 최적 전송 선로를 이용한 분산형 증폭기를 제작하였다. 측정을 통해 얻은 결과로서 동작 주파수 범위 내에서 최대 이득은 14.5 dB, 최소 이득은 12.8 dB로 측정되었다. 또한, 제안하는 분산형 증폭기의 측정된 효율은 3 GHz에서 25.6 %로 기존의 일반적인 분산형 증폭기에 비해 약 7.6 % 개선되었다. 출력 전력은 일반적인 분산형 증폭기에 비해 약 1.7dB 개선된 10.9 dBm을 얻었다. 이러한 성능 개선은 역방향 전류의 상쇄로 인한 것으로 분석된다.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.814-819
• /
• 2010

This study proposes the antenna circuit design for the transmitting wireless power, the development of the RF non-contact type Dosimeter. That is, the study designed the optimization and numerical analysis of the antenna circuit for the antenna design of 13.56MHz over the frequency bands for transmitting wireless power. We studied the needed items in the existing RF type Dosimeter with battery to implement the wireless power non-contact Dosimeter within the battery. We compared to the real measurement value as calculating the value of the inductance and capacitance through the numerical analysis for the antenna LC resonance using the theory of the electromagnetic induction method. This method to drive low power is designed to simplify the circuit and to improve the efficiency of the rectifier. We convince our research contributes not only to understand the simplified circuit and miniaturization, but also to help the design and application technology of the wireless power transmit system which is received power supply with wireless.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.276-280
• /
• 2004

This paper first takes advantage of a rigorous modal transmission-line theory (MTLT) to analyze the filtering properties of optical waves guiding by grating-assisted fiber couplers (GAFCs). The numerical results reveal that MTLT serves as a suitable and powerful approach to evaluate systematically the dispersion properties and the characteristics of optical power transfer in GAFCs.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.1-7
• /
• 2008

In this paper, we proposed the method judging whether transmission system is radial system or loop system using simple set theory. And we proposed the method judging whether power device's operation causes of blackout or not. Using proposed method, we developed automatic judgement system of radial system for preventing power device's wrong control in SCADA. Finally, we simulated a variety of case study using SCADA simulator with developed system, and verified reliability of the result and performance of developed system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.31-34
• /
• 1991

This paper presents a voltage-reactive power control algorithm considering fuzziness. In this paper, a coordination technique based on fuzzy set theory is applied for system loss-voltage compromises. Here, we introduce membership functions to measure the adaptability of real power loss of transmission line and the deviation of load bus voltage from the constraints. Then the optimization of problem is solved by a linear programming technique considering the fuzzy set theory. The objective is a degree of satisfaction about the fuzzy decision-making function. The effectiveness of this algorithm has been verified by testing on sample systems.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.696-700
• /
• 1987

Guide modes in a graded index multinmode optical fiber are turned into clad modes when the optical fiber was bended into a perpendicular direction to its optical axes by microbending forces, which causes the loss of the guiding optical power. The theories reported on this microbending power loss can be applied to calculation of the transmission power loss only when the beding period equals to the mode coupling length. In this paper, we obtained the general expression of the optical power transmission loss in a graded index multimode fiber bended periodically. This can be applied to the calculation of the power loss of the periodically microbended fiber with an arbitrary bending shape and period. Also, by using the beam theory in mechanics, we could derive the expression of the displacement of the optical fiber caused by the external force which bends the fiber into a periodic trapezoidal shape. Experiments were carried out to determine the dependence of the power loss on the period of the microbending forces. Experimnetal results were in good agreement (in the same order of the magnitude) with theoritical values derived in our work within the bending period region of 2mm-10mm.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.143-151
• /
• 2011

This paper presents a survey of recent wireless power transfer systems. The issue of wireless power transfer is to achieve a highly efficient system with small positioning errors of the facilities setting. Several theories have been presented to obtain precise system design. This paper presents a summary of design theory for short range power transfer systems and detailed formulations based on a circuit model and an array of infinitesimal dipoles. In addition to these theories, this paper introduces a coil array scheme for improving the efficiency for off axis coils. In the microwave range, tightly coupled resonators provide a highly efficient power transfer system. This paper present san-overlay resonator array consisting of half wavelength microstrip line resonators on the substrate with electromagnetically coupled parasitic elements placed above the bottom resonators. The tight couplings between the waveguide and the load resonator give strong power transmission and achieve a highly efficient system, and enables a contact-less power transfer railroad. Its basic theory and a demonstration of a toy vehicle operating with this system are presented. In the last topic of this paper, harmonic suppression from the rectenna is discussed with respect to acircular microstrip antenna with slits and stubs.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.431-439
• /
• 2017

Since the power transmission line(PTL) passes through the high mountain and heavy snowfall region, it is necessary to keep the stability of the PTL. In this study, PTL is modeled as a mass-spring-damper system by using RecurDyn. The lumped mass model is verified by calculated from the simulation comparing the deflection analysis according to the sag and tension. In order to analyze the dynamic behavior of PTL, a damping coefficient for a multi-body model is derived by using the free vibration test and Rayleigh damping theory. Sleet jump simulation according to the region is performed. The maximum jump height, icing sag and amount of jump are confirmed. Also, the amount of jump and the reaction force at the supporting point according to the tension and load of ice are analyzed, respectively. As a result, it is noted that the amount of jump and reaction force are influenced more by the load of ice than by the tension of PTL.