• Spatial Information Research
• /
• v.6 no.1
• /
• pp.25-33
• /
• 1998

The study region encompasses about 5,900$km^2$ including the topographic maps of Kimhae, Pusan, Miryang, Yangsan, Panguhjin, Tonggok, Uhnyang, Ulsan, Youngchon, Kyongju, Pulguksa, and Kampo, all at a scale of 1:50,000. The paper discusses how to have prepared the four thematic maps, landslide and unstable slope distribution map, slope classification amp, soil classification map, and lineament density map. Using all the above maps and GIS, the relative slope-stability map for the study regiun was produced at a scale of 1:100,000 ; the map can be utilized for the regional land-use planning in the study region.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.473-486
• /
• 2014

The objective of this study is to produce the rock slope hazard map on the Mt. Hwangryeong located at center of Busan Metropolitan City for evaluating the rock slope hazard susceptibility. The Mt. Hwangryoeng is located between Dongrae and Ilkwang faults and consists of various rocks such as sedimentary rock, andesitic volcanic rock, andesite, gabbro and granitic rocks. Thematic maps were carried out using ArcGIS for Database including the orientations and density of joints, strength of rock constructed through the field survey and results from previous studies. Also, rock slope hazard susceptibility for the Mt. Hwangryoeng area was studied using empirical method through checklists proposed by NDMI (National Disaster Management Institute). Results from using the empirical method indicated that rock slopes are evaluated from very stable to stable, but moderate stability has been partially presented along the edge of the mountain area.

• Korean Journal of Remote Sensing
• /
• v.26 no.4
• /
• pp.411-419
• /
• 2010

The type of forestland value was evaluated using various thematic maps, satellite images, and aerial photograph of Namyangju, Based on GIS analysis, forestland value was classified into 4 kind types; conservation, production, recreation, and development values. Finally, the comprehensive analysis map of forestland value was made according to the priority order of value assessment. Among the whole forestland of Namyangju, conservation value area is $195km^2$, high production value area $96km^2$ except the conservation value area, high recreation value area $59km^2$, and the high development value area is $11km^2$. Henceforward, The value evaluation system of forestland by using GIS is to be very applicable for the scientific management of forestland, according to the periodic data update.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.43-55
• /
• 1994

Two thematic maps on environmental geology were produced in the Cheong-Ju area, with aids of GIS technique. They are landslide hazards & risk maps and cut-fill maps. The models of environmental geology map and digital database were established for creation of these maps by means of cartographic simulation in GIS. These special maps are very important for understanding the environmental characteristics of the study area, and can be applied in the establishment of the regional land use planning. For instance, the landslide hazard and risk map can play very important role in the road design, and cut- fill map in the construction work in the area. The scoring system for landslide analysis was developed through the evaluation of each environmental geologic factor in relation to the others and reflects the relative imporatance of each factor. The excavation index(easy, intermediate and difficult) was evaluated through cut-fill analysis, and they can be very useftil for assessing the degree of excavation difficulty.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.466-469
• /
• 2005

In this study e-map component was designed and developed to possibly overlay with all kinds of thematic maps in various scales and provide the all detailed information by using high-resolution satellite image and GIS. Also, this system has powerful map composition tool to display map such as legend, scale bar, index map and so on. For this, this e-map component was designed by using UML and developed based on Windows 2000 and implemented by using Visual Basic 6.0 as development programming language, Map Objects 2.1 of ESRI as GIS component. Through this system, the forest officials could generate more detailed topography and desired thematic map. In addition, the data consistency in DBMS could be maintained by using SDE (Spatial Database Engine) for their job and share the standard forest database with others in real time.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.661-670
• /
• 2018

This study aims to develop a methodology of convolutional neural networks (CNNs) to produce thematic maps from remote sensing data. Optimizing the image size for CNNs was studied, since the size of the image affects to accuracy, working as hyper-parameter. The selected study area is Mt. Ung, located in Dangjin-si, Chungcheongnam-do, South Korea, consisting of both coniferous forest and deciduous forest. Spatial structure analysis and the classification of forest type using CNNs was carried in the study area at a diverse range of scales. As a result of the spatial structure analysis, it was found that the local variance (LV) was high, in the range of 7.65 m to 18.87 m, meaning that the size of objects in the image is likely to be with in this range. As a result of the classification, the image measuring 15.81 m, belonging to the range with highest LV values, had the highest classification accuracy of 85.09%. Also, there was a positive correlation between LV and the accuracy in the range under 15.81 m, which was judged to be the optimal image size. Therefore, the trial and error selection of the optimum image size could be minimized by choosing the result of the spatial structure analysis as the starting point. This study estimated the optimal image size for CNNs using spatial structure analysis and found that this can be used to promote the application of deep-learning in remote sensing.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.2 s.27
• /
• pp.9-19
• /
• 2005

The purpose of this study is to analyze the potential soil loss and hazard zone by the Revised Universal Soil Loss Equation(RUSLE) for preservation and management of land resources which is the base of ecosystem, and to grasp the relationship between RUSLE factors in the Nakdong River Basin. All thematic maps used in RUSLE are constructed through GIS and spatial analysis method derived from digital topographic maps, detailed soil maps, land-cover maps, and mean annual precipitation of 30 years collected respectively from National Geographic Information Institute, National Institute of Agricultural Science and Technology, and Ministry of Environment. The slope length of LS-factor that takes much times by the study area's wideness was calculated automatically through AML(Arc Macro Language) program developed by Van Remortel et al.(2001, 2003). The results are as follows; First, according to the soil loss estimation by the RUSLE, it shows that approximately 82% of the study area have relatively lower possibility of soil loss which is the 1 ton/ha in annual soil loss. While, 9.4% ($2,228km^2$) needed intensive and continuous management for soil loss. Because the amount of their annual soil loss was greater than 10 ton/ha that is optimum level suggested by Morgan(1995). For these areas, the author believe that a new approach which can minimize environmental impacts from soil loss through improvement of cultivation process and buffer forest zone should be applied. Second, according to the relationship between the RUSLE factors, topographical(LS-factor) and cover management(C-factor) conditions have a lot of influence on soil loss in case of the Nakdong River Basin. However, because of RUSLE factor's influence that affect to soil loss might be different based on the variety of spatial hierarchy and extent, it is necessary to analyze and evaluate factor's relationship in terms of spatial hierarchy and extent through field observations and further studies.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.631-634
• /
• 2006

Three main important sources for establishing GIS are the orthomap in scale 1:5 000 with Ground Sampling Distance of 0,5m; DEM/DTM data with height error of ${\pm}$1,0m and topographic map in scale 1: 10 000. The new era with Very High Resolution Satellite (VHRS) images as IKONOS, QuickBird, EROS, OrbView and other ones having Ground Sampling Distance (GSD) even lower than 1m has been in potential for producing orthomap in large scale 1:5 000, to update existing maps, to compile general-purpose or thematic maps and for GIS. The accuracy of orthomap generated from VHRS image affects strongly on GIS reliability. Nevertheless, orthomap accuracy taken from VHRS image is at first dependent on chosen sensor geometrical models. This paper presents, at fist, theoretical basic of the Rational Polynomial Coefficient (RPC) model installed in the commercial ImageStation Systems, realized for orthorectifying VHRS images. The RPC model of VHRS image is a replacement camera mode that represents the indirect relation between terrain and its image acquired on the flight orbit. At the end of this paper the practical accuracies of IKONOS and QuickBird image orthorectified by RPC model on Canadian PCI Geomatica System have been presented. They are important indication for practical application of producing digital orthomaps.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.107-116
• /
• 1994

Choropleth map is a type of thematic maps in which areal units are shaded with a color or pattern that symbolizes some characteristic of the mapped unit. CMS was first developed to produce choropleth maps on ordinary microcomputer environments in 1988. Since then there have been significant technological developments and enhancements in user environments, which have affected the field of choropleth mapping systems posi¬tively. A new version of CMS was developed in accordance with these changes. CMS II requires an IBM PC, or compatible, with the minimum 640KB memory and VGA graphic board. It supports HP laser jet printers to output a high resolution map. The program can use Hangul letters for main menu, map title, and legend. And dBase file format (DEW) was implemented to exchange attribute files effectively.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.341-344
• /
• 2007

A major obstacle to classify and validate Land Cover maps is the high cost of generating reference data or multiple thematic maps for subsequent comparative analysis. In case of inaccessible area such as North Korea, the high resolution satellite imagery may be used as in situ data so as to overcome the lack of reliable reference data. The objective of this paper is to investigate the possibility of utilizing QuickBird (0.6m) of North Korea obtained from Google Earth data provided thru internet. Monthly NDVI images of nine months from the summer of 2004 were classified into L=54 cluster using ISODATA algorithm, and these L clusters were assigned to 7 classes; coniferous forest, deciduous forest, mixed forest, paddy field, dry field, water and built-up area. The overall accuracy and Kappa index were 85.98% and 0.82, respectively, which represents about 10% point increase of classification accuracy than our previous study based on GCP point data around North Korea. Thus we can conclude that Google Earth may be used to substitute the traditional in situ data collection on the site where the accessibility is severely limited.