• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.104-115
• /
• 2022

Purpose: Infrastructure inspection and its diagnostics technique have been rapidly developing recently. Therefore, it is important to secure the reliability of diagnostic equipment, and this paper deals with inspection of diagnostic equipment, introduction to a certification system and development plans for infrastructure. Method: Several certification systems are established and introduction plans are reviewed through experts by synthesizing the contents of certification research for existing infrastructure diagnosis equipment. In addition, the revision of the law for introduction of the system is reviewed, detailed operation regulations are prepared and phased development plans are reviewed, which are based on the operation scenario. Result: Inspection and certification plans were constructed through four routes in order to consider infrastructure inspection and diagnostic equipment in use, and new diagnostic equipment using state-of-the-art technology. Furthermore, market confusion depending on the introduction of a new certification system is minimized and reliability is secured by transforming a simple inspection system in the short term into a formal certification system in the long term. The law amendments according to the introduction of the system were reviewed and detailed operation regulations were developed. Also, phased development plans, which are based on the long-term development scenario including manpower, infrastructure and specifications, were presented. Conclusion: It is important to secure reliability through the distribution and certification of diagnostic equipment using 4th industrial technology to strengthen the safety management of infrastructure at the national level since the infrastructure is various in type and increasingly large in size. It is also essential to train human resources who can use new technology with inspection and diagnosis system in order to enhance the safety management of all infrastructures. Moreover, it is necessary to introduce a regular inspection system for infrastructure that combines loT technology in the long-term point of view and to promote the introduction by giving active incentives to institutions that actively accept it.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.69-83
• /
• 2011

The aim of the research was to provide basic information for a suitable management and utilization of protected trees by law. To achieve this aim, this study investigated the current state, management status and utilization of protected trees by law in Gyeongsan city. The result of the current state of protected trees indicated that there were 55 protected trees designated since 1982. These trees consisted of 8 species which were located at 41 places. Major species was Sophora japonica (30.9%), followed by Zelkova serrata (23.6%). The protected trees have been used as sacred trees (45.5%) in the villages, followed by scenic trees (36.7%). 38.2% of the protected trees were 200 to 300 years old and 54.6% of the trees were 15 to 30 m in height. 34% of the protected trees were located in the villages, followed by beside road (19.5%). Single trees (78%) were mostly planted. The result of the management status indicated that 58.5% of the root area in protected trees were covered with bare ground, followed by gravel mulch (19.5%). The average of soil hardness was 9.64 mm. The safety fence of tree was installed at 9 places (22%) and a stone wall was built at 22 places (53.7%). 70.9% of the protected trees had a surgical operation to prevent cavities and to cure decay. Granite stone signs were installed at 33 places. The result of the utilization of protected trees indicated that 13 places were used as a rest area in the villages. It consisted of shelters, benches, athletic facilities and outdoor tables. The research suggested potential places for a mini park(pocket park) to recover a local community by using surrounding available land and improving current rest areas of protected trees. The research presented here is a first step towards a more comprehensive analysis of protected trees in Gyeongsan and further research is needed.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.647-657
• /
• 2018

This study was carried out to review as criteria for zoning at management plan for river restoration, in case of naturalness of river environment and suitability of water friendly activity suggested at assessment system of river environment in Korea. As a result of reviewing law and guidelines concerned, historic & cultural resources used as criteria for preservation zone, it was judged that the historical and cultural value as the preservation zone needs to be examined in connection with waterfriendly activity zone. In this study, we propose a sequential evaluation method to distinguish the waterfriendly activity zone by applying suitability of waterfriendly activity reflecting land use social characteristics, followed division of preservation and restoration zone at the first stage by the naturalness of river environment reflecting the natural environmental characteristics as a result of application to the test bed, Gap and Yudeung streams. In particular, it was concluded that the results of the present study provided more clear criteria for the problem that the last criteria for zoning did not reflect the difference between the left and the right side of stream, or the designation of the excessive water friendly zone. On the other hand, the criteria for designation in this study reflect the characteristics of various river environments as well as the setting of assessment unit based on the physical characteristics of rivers, and other legal regulations and local situations should be adjusted and supplemented in administrative procedures.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.431-444
• /
• 2017

This study was carried out to review the guidelines being used by law and national policy concerned on river environments management and suggest the applicability of newly developed river environment assessment system. In the current legal system, the national river environment management system is insufficient in securing an independent status in the legal institutional system which is separated to the Ministry of Land, Transport and Infrastructure and the Ministry of Environment. And the river environment assessment system of the national standard, which is a core matter, has not been established yet. In particular, there is a lack of integrated approach between the upper and lower plan or related plans on water resources, water quality, river environment and aquatic ecosystem management. In addition, the consistency and effectiveness as the process of planning and design according to the current status and comprehensive analysis and evaluation of the river environment were not secured either. To integrate national river environment management system and improve efficiency, I proposed the establishment of hierarchy and connection between national river plans, and the adoption and application of developed assessment system based on characteristics of river environment in Korea. Finally, I proposed the separated application with dividing the developed assessment system including the naturalness of river environment and suitability of water friendly activity into both assessment method for management plan of water resources of river basins & basic river plan respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.45-53
• /
• 2016

As the number of units increased by vertical extension is recently allowed according to the Housing Law, the aged apartment remodeling projects using the same allowed method are pursued in several apartment complex located in Bundang and Pyungchon. However, progress of the projects is not advanced due to uncertainty of the process. Therefore, the purpose of this study is to improve a business process model for the aged apartment remodeling in case of the number of units are increased for the remodeling union to pursue the remodeling project easily. In order to improve the process model, requirements for the Housing Act are analyzed, the existing process model is developed based upon the requirements, uncertainty of the existing process is examined and a to be process model is proposed to eliminate the uncertainty. Many architects and engineers are consulted to discuss the uncertainty and process model. This model will help the Government to reform the Housing Act and remodeling unions to pursue the aged apartment remodeling.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.91-100
• /
• 2010

Existing traffic safety studies have focused on identifying the relationship among roadway crashes, highway design and incremental weather condition such as rainy/ice weather. However, it is hard to find researches that studied the effect of sun glare on traffic safety although there are abundant evidences demonstrating that fatal traffic crashes are attributed to the sun glare. Affecting drivers'vision particularly during the morning or the evening time when the sun positions close to the horizon, sun glare directly deteriorate drivers'judgmental capability. In this paper, we numerically analyze the effect of sun glare on the drivers'vision in time and space domains. Applied to the roadways around St Louis area in the United States, the GIS based simulation analysis identifies the time of day in a year and the segments of highways that are potentially influenced by the sun glare. This study evidentially confirms the fact that roadway bounded for West and East directions have longer time influenced by sun glare particularly during Spring and Fall season than other roadways. The computational result provides risky time periods of day at intersections or pedestrian crossings where the sun glare potentially endangers traffic safety, which be utilized to reduce the crashes due to the sun glare.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.339-347
• /
• 2012

After towing rope connecting a barge to a tug was subdivided into multiple finite elements, then those dynamic models was established using Newton's second law and considering the external force and moment such as tension, drag, Coriolis force, gravity, buoyancy, and impact due to free surface acting on each element. While the previous research on the model of towing rope considered only translation, five-degree-of-freedom equations of motion except roll based on the body-fixed frame were established in this paper. All elements are connected by a spring and a damper, and the stiffness of the spring was set as the equivalent value of the real rope. In order to confirm the established multiple finite element model, various scenarios such as freely falling of towing rope in the air and above the free surface, accelerating of a tug which tows a barge connected by towing rope, and sinusoidal moving of a tug were set up and simulated. As the results, the trajectories of the tug, the barge, and the towing rope showed good tendencies to the ones of real expected situations.

• Journal of the military operations research society of Korea
• /
• v.32 no.2
• /
• pp.131-142
• /
• 2006

Nowadays, most enterprises have introduced both EA methodology to optimize an entire enterprise and CBD methodology to improve a software reusability. The Korea Government not only have developed many EA guiding products such as EA framework, Reference Model, Guideline, etc. but also have instituted a law to optimize a government-wide enterprise. The Minister of National Defense(MND) have developed the MND-AF as a standard methodology for EA and the ADDMe as a standard methodology for CBD. But it is possible to develop products of WD-AF and ADDMe redundantly because the process of MND-AF and ADDMe is not quitely aligned. The purpose of this paper is to present a scheme that ADDMe can reuse the artifacts of MND-AF by analyzing the relationships between two processes. In order to identify the relationships between two processes, we first identify the relation of a 'definition' part of two processes and then identify the relation of an 'attribute' part based on the relation of a 'detailed definition' part. As a result we found that 113 attributes of MND-AF are related to 49 attributes of ADDMe. Therefore the proposed study will decrease the development cost and time and will be a good example for aligning the process of EA and CBD methodology.