• 한국수학사학회지
• /
• 제15권2호
• /
• pp.15-32
• /
• 2002

The first part of this thesis gives some brief explanation of the theory and history of imaginary elements in analytic geometry in the 19th century. The second part of this thesis discusses the theory of imaginary elements of synthetic geometry in the first half of the 19th century. Then the next part mentions the theory of imaginary elements of geometry in the second half of that same century. Particularly Christian von Staudt's and Felix Klein's theories are handled in this part. Von Staudt, who has completed the system of the synthetic projective geometry, used ‘involution’ in order to introduce a new concept ‘imaginary elements’- imaginary points, imaginary lines and imaginary plane-in synthetic geometry. Klein applied von Staudt's theory as he convey the result of the research in algebraic geometry in a picture. Von Staudt's and Klein's research may be regarded as the top of the effort to investigate possible relationship between real and imaginary structures.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1817-1822
• /
• 2011

The fault current has been increasing due to expansive substation facilities for meeting the increase of demand. To limit increasing fault current in a power system, among methods the superconducting fault current limiter (SFCL) has been considered to be adopted in the power grid. However, in case of adopting SFCL in the power system, most of SFCLs need to solve problems such as recovery, cost. With efforts to solve those problems, the novel fault current limiting device which is called hybrid SFCL is developed. To apply the hybrid SFCL, it has to be needed to analyze application possibility and itself operation characteristics. In this paper, the fault current limiting and operation characteristics of hybrid SFCL with first half cycle the limiting operation in case of various resistances of superconducting element were analyzed through experiment.

• 한국의류학회지
• /
• 제16권2호
• /
• pp.169-180
• /
• 1992

The purpose of this study is to investigate the effects of type of clothing microclimate and exercise condition on ventilation. The experimental system employed a trace gas technique of the previous research. Clothing microclimate volume measurement was based on the substitution water technique for inter-clothing air volume. The experimental variables were tested at four levels of clothing microclimate spacing, microclimate shape of the previous research and two levels of exercise conditions. 2, 4, 6 cm ease were added to B/2+4 of basic blouse pattern for the microclimate spacing variable. Each combination of three variables were tested in triplicate. Analysis of variance of experimental variables on vetilation, such as oxygen exchange rate, half time of first order model was conducted. Oxygen exchange rate and half time of first order model are affected by the shape of microclimate air and exercise condition.

• ETRI Journal
• /
• 제43권2호
• /
• pp.344-356
• /
• 2021

CRAFT is a tweakable block cipher introduced in 2019 that aims to provide strong protection against differential fault analysis. In this paper, we show that CRAFT is vulnerable to side-channel cube attacks. We apply side-channel cube attacks to CRAFT with the Hamming weight leakage assumption. We found that the first half of the secret key can be recovered from the Hamming weight leakage after the first round. Next, using the recovered key bits, we continue our attack to recover the second half of the secret key. We show that the set of equations that are solvable varies depending on the value of the key bits. Our result shows that 99.90% of the key space can be fully recovered within a practical time.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권4호
• /
• pp.225-230
• /
• 2002

Experiments on deactivation kinetics of immobilized lipase enzyme from Candida cyl-indracea were performed in stirred bath reactor using rice bran oil as the substrate and temperature as the deactivation parameter. The data were fitted In first order deactivation model. The effect of temperature on deactivation rate was represented by Arrhenius equation. Theoretical equations were developed based on pseudo-steady state approximation and Michaelis -Menten rate expression to predict the time course of conversion due to enzyme deactivation and apparent half-life of the immobilized enzyme activity in PFR and CSTH under constant feed rate polity for no diffusion limitation and diffusion limitation of first order. Stability of enzyme in these continuous reactors was predicted and factors affecting the stability were analyzed.

• Journal of Magnetics
• /
• 제4권4호
• /
• pp.107-110
• /
• 1999

In order to investigate the magnetism of Ru submonolayer on Pb(001), we have performed first-principles calculations for half-layer of Ru on Pd(001) using the full-potential linearzed augmented plane wave (FLAPW) method. We have found that the magnetic moment of Ru for 0.5 layer is 2.21 B. It is found that substrate Pd layers are polarized by the 0.5 Ru overlayer to have significant magnetic moments. Our results are compared with those obtained by the anomalous Hall effect. The calculated electronic structures, i,e., the spin densities and density of states are presented and discussed in relation with magnetic properties.

• 한국컴퓨터산업학회논문지
• /
• 제10권4호
• /
• pp.167-176
• /
• 2009

본 논문에서는 간단한 대칭단을 사용하여 암호와 복호를 동일하게 개선한 SHACAL-1을 제안한다. SHACAL-1의 한 라운드는 20스텝으로 되어 있고 모두 4라운드로 구성되어 있으며 복호는 암호의 역함수로 되어있다. 본 논문에서 제안하는 대칭구조 SHACAL-1은 전반부, 대칭단 그리고 후반부의 3개 부분으로 구성한다. 전반부는 SHACAL-1의 암호 알고리즘으로 한 라운드는 10스텝으로 하여 4라운드로 구성한다. 후반부는 SHACAL-1의 복호 알고리즘으로 동일하게 구조를 가진다. 그 중간에 대칭단을 삽입하여 암호와 복호 알고리즘을 동일하게 구성한다. 제안한 대칭구조 SHACAL-1은 SHACAL-1과 수행시간 테스트 결과 거의 영향을 미치지 않은 결과를 보였고, 안전성 또한 대칭단의 적응으로 선형, 차분분석과 같은 높은 확률 패스를 이용한 공격에도 분석을 어렵게 하고 있다. 제안한 알고리즘은 암호와 복호가 다른 블록 암호에도 쉽게 적용 가능하며, 다른 블록 암호 설계에도 유용하다.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.238-245
• /
• 2007

This paper considers the problem of regulating the output voltage of a current doubler rectified asymmetric half-bridge (CDRAHB) DC/DC converter via fuzzy integral control. First, we model the dynamic characteristics of the CDRAHB converter with the state-space averaging method, and after introducing an additional integral state of the output regulation error, we obtain the Takagi-Sugeno (TS) fuzzy model for the augmented system. Second, the concept of parallel distributed compensation is applied to the design of the TS fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, numerical simulations of the considered design method are compared to those of the conventional method, in which a compensated error amplifier is designed for the stability of the feedback control loop.

• Journal of the Korean Data and Information Science Society
• /
• 제25권6호
• /
• pp.1581-1589
• /
• 2014

In this paper, we consider maximum likelihood estimators of the location and scale parameters for the half-logistic distribution when samples are multiply Type I hybrid censored. The scale parameter is estimated by approximate maximum likelihood estimation methods using two different Taylor series expansion types ($\hat{\sigma}_I$, $\hat{\sigma}_{II}$). We compare the estimators in the sense of the root mean square error (RMSE). The simulation procedure is repeated 10,000 times for the sample size n=20 and 40 and various censored schemes. The approximate MLE of the second type is better than that of the first type in the sense of the RMSE. Further an illustrative example with the real data is presented.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권1호
• /
• pp.77-84
• /
• 2007

In this paper, Takagi-Sugeno (TS) fuzzy integral control is investigated to regulate the output voltage of an asymmetric half-bridge (AHB) DC/DC converter; First, we model the dynamic characteristics of the AHB DC/DC converter with state-space averaging method and small perturbation at an operating point. After introducing an additional integral state of the output regulation error, we obtain the $5^{th}$-order TS fuzzy model of the AHB DC/DC converter. Second, the concept of the parallel distributed compensation is applied to design the fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, simulation results are presented to show the performance of the considered design method as the output voltage regulator and compared to the results for which the conventional loop gain method is used.