• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.855-859
• /
• 2007

It is essential to obtain accurate and highly reliable streamflow data for water resources planning, evaluation and management as well as design of hydraulic structures. A new discharge estimation method, which is named 'non-dimensional velocity distribution and index-velocity method,' was proposed in this research. This method showed very close channel discharges which were calculated with the exiting velocity-area method. When velocity-area method is used to estimate channel discharge, it is required to observe point velocities at every desired point and vertical using a current meter like Price-AA. However 'non-dimensional velocity distribution and index-velocity method' is used, it become optional to observe point velocities at every desired point and vertical. But this method can not be applied for the cases of very complex and strongly asymmetric channel cross-sections because non-dimensional velocity distribution by entropy concept may be quite biased from that of natural rivers.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.578-597
• /
• 2014

Understanding of 'spatial' pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical 'spatial' pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting 'spatial' pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.103-112
• /
• 2014

면적평균강우량의 산정은 가용 수자원의 정확한 양을 파악하고 강우-유출해석에 필수적인 입력자료이기 때문에 매우 중요하다. 이와 같은 면적평균강우량의 정확한 산정을 위한 필수적인 조건은 강우관측망의 균일한 공간적 분포이다. 본 연구에서는 보다 향상된 유역 면적평균강우량 산정을 위한 강우관측망의 공간분포 평가방법론을 제시하고, 이를 한강 및 금강 유역에 적용하였다. 강우관측소의 공간적 분포 특성은 최근린 지수(nearest neighbor index)를 이용하여 정량화하였다. 유역별 강우관측소의 공간적 분포가 면적평균강우량 산정에 미치는 영향을 평가하기 위하여 2013년의 강우사상에 대해 산술평균법, 티센가중법, 추정이론을 이용하여 면적평균강우량을 산정하고 각 경우에 대해 추정오차를 평가하였다. 그 결과 공간분포가 우수한 유역은 면적평균강우량의 추정오차가 상대적으로 작으며, 반대로 공간분포가 왜곡된 유역의 경우는 상대적으로 추정오차가 큼을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.399-406
• /
• 1999

Recently, the construction of the several highway bridges in the karst area have encountered severe problems associated with cavities and sinkholes. To solve this problems, it is important to understand the distribution characteristics of cavities in the construction site on limestone area. This paper briefly describes the different types, the distribution control factors and the infill sediment types of lime-cavities in the study area, bridge site in the karst area and propose the effective method of survey design. Cavity system may be divided into two main groups, 1)'slot and cave system'and 2)'sinkhole and cave system'. And the shape, the size and the distribution pattern of cavity are controlled by three main factors - rock type, geological structure and ground water condition. Additionally, infill sediment may be considered as one of the important design factors for foundation design and divided into four types by sediment properties. There are geophysical thechnics and geologic survey and drilling test, etc. by the survey method to interpretate characteristics of cavity system, and this methods are optimally designed at the site investigation stage.

• 응용통계연구
• /
• 제25권6호
• /
• pp.1019-1026
• /
• 2012

This paper presents a method for the identification of "edge observations" located on a boundary area constructed by a truncation variable as well as for the identification of outliers and the after fit of multivariate skew $t$-distribution(MST) to asymmetric data. The detection of edge observation is important in data analysis because it provides information on a certain critical area in observation space. The proposed method is applied to an Australian Institute of Sport(AIS) dataset that is well known for asymmetry in data space.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.41-47
• /
• 2008

This article deals with the stress analysis of the friction drive, which transmits the power via the rolling resistance on the contract area between the two rotating bodies. On the contact area, friction drives are normally involved with shear stress due to the transmitted force, as well as normal stress. Thus the stress analysis including the shear stress is necessary for the design of the friction drive. Hertzian results can be used to estimate the normal stress distribution and elastic deflection of the contact area, although the shear stress distribution is not well defined. In order to investigate the shear stress distribution and its effects in a friction drive, we have performed the stress analysis of the spherical continuously variable transmission(CVT) using finite element method. The spherical CVT is one of friction drives, which is used in small power applications. The numerical results show that the normal stress distribution is not affected by the transmitted shear force, and the maximal shear stress is increased in small amount along with the shear force.

• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.11-18
• /
• 2018

In this study, the cross-sectional image has been acquired to evaluate the aggregate distribution affecting quality of lightweight aggregate concrete, and through the binarization method, the study is to calculate the aggregate area of upper and lower sections to develop the method to assess the aggregate distribution of concrete. The acquisition of cross-section image of concrete for the above was available from the cross-sectional photography of cleavage tension of a normal test specimen, and an easily accessible and convenient image analysis software was used for image analysis. As a result, through such image analyses, the proportion of aggregate distribution of upper and lower sections of the test specien could be calculated, and the proportion of aggregate area U/L value of the upper and lower regions of concrete cross-section was calculated, revealing that it could be used as the comprehensive index of aggregate distribution. Moreover, through such method, relatively easy image acquisition methods and analytic methods have been proposed, and this indicated that the development of modeling to assess aggregate distribution quantitatively is available. Based on these methods, it is expected that the extraction of fundamental data to reconsider the connectivity with processes in concrete will be available through quality assessment of quantitative concrete.

• 한국수자원학회논문집
• /
• 제41권6호
• /
• pp.575-585
• /
• 2008

수자원의 계획 평가 관리 및 수공구조물의 설계를 위해서는 정확하고 신뢰성 높은 유량 자료가 필수적이다. 본 연구에서는 Chiu의 유속분포와 최대유속 추정을 이용하여 하천유량을 계산하는 새로운 방법을 제시하였다. 기존 면적유속법과 비교 검토한 바, 본 연구에서 개발한 방법은 기존 유속면적법과 매우 유사한 하천유량을 보였다. Price-AA를 이용하여 유속을 측정할 경우 측선의 수심에 따라 정해진 지점에서 유속을 측정하여야 하는데, 본 연구에서 제시한 방법을 이용하면 임의의 측선과 측점에서 유속을 측정하여도 정확한 유량계산이 가능하다. 그러나 흐름 단면이 매우 복잡하거나 좌우의 비대칭성이 심한 경우에는 엔트로피 개념의 Chiu의 유속분포가 실제 자연하천의 흐름분포에서 멀어지고 유량산정에 Chiu의 유속분포의 정확도가 떨어지기 때문에 본 연구에서 제시한 방법을 적용하기 어렵다.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.130-136
• /
• 2010

In this study, we propose a new method for generating candidate solutions based on both the Cauchy and the Gaussian probability distributions in order to use the merit of the solutions generated by these distributions. The Cauchy probability distribution has larger probability in the tail region than the Gaussian distribution. Thus, the Cauchy distribution can yield higher probabilities of generating candidate solutions of large-varied variables, which in turn has an advantage of searching wider area of variable space. On the contrary, the Gaussian distribution can yield higher probabilities of generating candidate solutions of small-varied variables, which in turn has an advantage of searching deeply smaller area of variable space. In order to compare and analyze the performance of the proposed method against the conventional method, we carried out experiments using benchmarking problems of real valued functions. From the result of the experiment, we found that the proposed method based on the Cauchy and the Gaussian distributions outperformed the conventional one for most of benchmarking problems, and verified its superiority by the statistical hypothesis test.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.823-826
• /
• 2004

In this paper, A tracking of the moving objects using normalized hue distribution in HSI color model was proposed. Moving objects are detected by using difference image method and integral projection method to background image and objects image only with hue area. Hue information of the detected moving area are normalized by 24 levels from $0^{\circ}$ to $3600^{\circ}A$ distance in between normalized levels with a hue distribution chart of the normalized moving objects is used for the identity distinction feature parameters of the moving objects. To examine proposed method in this paper, image of moving cars are obtained by setting up three cameras at different places every 1 km on outer motorway. The simulation results of identity distinction show that it is possible to distinct the identity a distance in between normalization levels of a hue distribution chart without background.