International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of spatial pressure distribution during ice-structure interaction using pressure indicating film

  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Understanding of 'spatial' pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical 'spatial' pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting 'spatial' pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.

Keywords

References

  1. Daley, C., 1992. Ice edge contact and failure. Cold Regions Science and Technology, 21(1992), pp.1-23. https://doi.org/10.1016/0165-232X(92)90002-C
  2. Daley, C., 1994. MSI Ice loads data-compilation of medium scale ice indentation test results and comparison to ASPPR. Transport Canada Publication, TP 12151E. Canada: National Research Council of Canada.
  3. Daley, C., 2004. A study of the process-spatial link in ice pressure-area relationships. NRC PERD/CHC Report 7-108. Canada: National Research Council of Canada.
  4. Daley, C., 2007. Reanalysis of ice pressure-area relationships. Marine Technology, 44(4), pp.234-244.
  5. Frederking, R., 1999. The Local pressure-area relation in ship impact with ice. Proceedings 15th International Conference on Port and Ocean Engineering under Arctic Conditions, POAC '99, Espoo, Finland, 23-27 August 1999, pp.687-696.
  6. Frederking, R., 2004. Ice pressure variations during indentation. 17th International Symposium on Ice, Saint Petersburg, Russia, 21-25 June 2004, pp.307-314.
  7. Gagnon, R., 2004a. Analysis of laboratory growler impact tests. Cold Regions Science and Technology, 39, pp.1-17. https://doi.org/10.1016/j.coldregions.2003.11.002
  8. Gagnon, R., 2004b. Side-viewing high-speed video observations of ice crushing. 17th International Symposium on Ice, Saint Petersburg, Russia, 21-25 June 2004, pp.289-298.
  9. Gagnon, R , 2008a. Analysis of data from bergy bit impacts using a novel hull-mounted external impact panel. Cold Regions Science and Technology, 52, pp.50-66. https://doi.org/10.1016/j.coldregions.2007.04.018
  10. Gagnon, R., 2008b. A new impact panel to study bergy bit/ship collisons. 19th IAHR International Symposium on Ice "Using New Technology to Understand Water-Ice Interaction", Vancouver, BC, Canada, 6-11 July 2008, pp.993-1000.
  11. Kim, H., Daley, C., and Ulan-Kvitberg, C., 2012. Reappraisal of pressure distribution induced by ice-structure interaction using high-precision pressure measurement film. IceTech 2012, Banff, Canada, 17-20 September 2012, pp.191-199.
  12. Kim, H. and Daley, C., 2013. Reanalysis of pressure patterns and pressure-area curves considering resolution of pressure measurement film. POAC 2013, Espoo, Finland, 9-13 June 2013.
  13. Liggins, A.B., Stranart, J.C.E., Finlay, J.B. and Rorabeck, C.H., 1992. Calibration and manipulation of data from fuji pressure- sensitive film. Experimental Mechanics: Technology Transfer Between High Tech Engineering and Biomechanics (Clinical Aspects of Biomedecine), pp.61-70.
  14. Sayed, M. and Frederking, R.M.W., 1992. Two-dimensional extrusion of crushed ice. Part 1: experimental. Cold Regions Science and Technology, 21, pp.25-36. https://doi.org/10.1016/0165-232X(92)90003-D
  15. Sanderson, T.J.O., 1988. Ice mechanics: Risks to offshore structures. London: Graham and Trotman Ltd.
  16. Ulan-Kvitberg, C.A., 2012. Adapting pressure films to measure pressure patterns in ice-steel interaction experiments. Masters Thesis. Memorial University of Newfoundland.