• 한국안전학회지
• /
• 제24권5호
• /
• pp.48-56
• /
• 2009

This paper presents the procedure for the optimal design of a PSC-I girder bridge considering life cycle cost (LCC). The load carrying capacity curves for the concrete deck, PSC-I girder and $\pi$-type pier were derived and used for the estimate of service lives. Total life cycle cost for the service life was calculated as sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The advanced First Order Second Moment method was used to estimate the damage cost. The optimization method was applied to the design of PSC-I girder bridge. The objective function was set to the annual cost, which is defined by dividing the total life cycle cost by the service life, and constraints were formulated on the basis of Korean Standards. The optimal design was performed for various service lives and the effects of design factors were investigated.

• 한국산업융합학회 논문집
• /
• 제15권4호
• /
• pp.117-124
• /
• 2012

Recent years, many industries acknowledge that environmental substantiality of products must be an essential role and it is one of the major importances for industries to consider the environmental impacts of products at the early stages of product development. This study investigated eco-design parameters and $CO_2-eq$. emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of touch monitor stand based on Eco-Design. In this study, to fulfill of Eco-Design, the environmental impact assessment of through LCA(Life cycle assessment) was carried out with benchmarking monitor stand and we suggested the direction of new design of touch monitor stand mechanism based on eco-friendly considerations. New design based on LCT(Life Cycle Thinking) showed that the following eco-friendly considerations at the early stage of design to be helpful to reduce GWP(Global Warming Potential) [kg $CO_2-eq$.] in new monitor stand development and it is necessary for Eco-Design process of the product.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.467-472
• /
• 2005

Characteristics of a Modified regenerative cycle gas turbine has been investigated. In the cycle, the turbine expansion is divided into two parts and the regenerator locates between them. Two types of mechanical design are assumed: two-shaft and single-shaft. In particular, optimal pressure ratio division between the high and low pressure turbines is evaluated for the single shaft configuration. The part load analyses have been carried out with the aid of off-design models. In addition to the general fuel only control, a variable speed control is assumed as the part load operating strategy of the single shaft configuration. Obvious advantage with the alternative cycle is observed in the variable speed operation of the single shaft design.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제15회 학술강연회논문초록집
• /
• pp.16-16
• /
• 2000

항공기 가스 터어빈 엔진의 공기 열역학적 특성을 분석하고 예측하기 위한 simulation program이 KARI-ONEP (Korea Aerospace Research Institute -ON-design Engine Program)의 이름으로 개발되었다. 이 program은 on-design cycle analysis를 위한 것으로서 program의 수행에 필요한 엔진 구성요소별 특성 치 data인 input data를 생성하는 input data generator인 KARI-ONEPi와 cycle analysis를 수행하는 주 program인 KARI_ONEPe로 구성이 되어있다.(중략)

• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.1-14
• /
• 2017

The consumption trend of fashion in modern industrial society is developing from the rapid changes, and the lifespan of fashion products becomes shorter due to the various industrial wastes. Due to the attitude change caused by the ethical consumption consciousness and environment awareness, the up-cycle fashion products got to receive attention, and it is in the limelight as a new trend to realize the sustainable fashion products in the domestic and foreign fashion. The purpose of this study lies in drawing the expression characteristics by investigating and analyzing the cases of each type on the fashion bag products of up-cycle brand, and contributing to the diversification of product family fitting to the characteristics of fashion bag product of up-cycle brand, systematic strategies of up-cycle fashion products, and activation of up-cycle fashion market. In research methods, the theatrical researches were conducted centered the relevant domestic literature materials, preceding papers, etc., which ran paralleled with the actual case analysis study. Through the preceding research and websites related to selected products, websites of up-cycle companies, relevant books, related articles, etc., the expression characteristics of up-cycle fashion bag products were drawn. The results of this study are as follows: First, as it has the feature of historicality, the designs can be created by containing the designer's story, story of materials, and consumer's story. Second, since it has the characteristic of sustainability, the application of manufacturing process and materials, extension of product life, conversion of original material's function, etc. can be sustainable. Third, as it's a trait of scarcity, all products may be produced by hand, and it can have the specialty which the original materials have. Fourth, since it has an eco-friendly trait, even while saving the original materials, the aesthetic needs could be met according to the consumers' continuous demand.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.673-686
• /
• 2017

This study is to understand the problems of cycle wear. Interviews and surveys were done to target male and female cyclists in order to understand the wearing conditions and satisfaction of cycle wearers. A total of 443 surveys were used to analyze demographic information, inconvenience and design preference. The average age of male respondents was 34.45 and females was 33.39. The majority were in their 20s and 30s. As for the bicycle riding time, 41.9% of females cycled in the morning and 39.5% cycled in the evening. For men, 44.7% of males cycled in the evening and 33.3% cycled in the morning. The number of cycle wear owned by female respondents were higher than men. Quick water-absorbent and drying properties were considered as important functionality in cycle wear for 87.8% of males and females. When wearing cycle wear, it was found that females felt more discomfort than males in terms of jersey top length. The study results indicated that cycle wear wearing conditions were different according to gender.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.387-390
• /
• 2008

The importance of the life cycle cost analysis for construction projects of bridge has been recognized over the last decades. Accordingly, theoretical models, guidelines, and supporting softwares have been developed for the life cycle cost analysis of bridges. However, it is difficult to predict life cycle cost considering uncertainties precisely. This paper presents methodology for optimal design of substructure for a steel box bridge. Total life cycle cost for the service life is calculated as sum of initial cost, damage cost considering uncertainty, maintenance cost, repair and rehabilitation cost. The optimization method is applied to design of a bridge substructure with minimal cost, in which the objective function is set to life cycle cost and constraints are formulated on the basis of Korean Bridge Design Specification. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on the damage probabilities to consider the uncertainty of load and resistance. An advanced first-order second moment method is used as a practical tool for reliability analysis using damage probability. Maintenance cost and cycle is determined by a stochastic method and user cost includes traffic operation costs and time delay costs.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.85-94
• /
• 2004

As over 70% of the total life cycle cost (LCC) of a product is committed at the early design stage, designers are in an important position to substantially reduce the LCC of the products they design by giving due to life cycle implications of their design decisions. During early design stages, there may be competing concepts with dramatic differences. In addition, the detailed information is scarce and decisions must be made quickly. Thus, both the overhead in developing parametric LCC models fur a wide range of concepts, and the lack of detailed information make the application of traditional LCC models impractical. A different approach is needed, because a traditional LCC method is to be incorporated in the very early design stages. This paper explores an approximate method for providing the preliminary LCC, Learning algorithms trained to use the known characteristics of existing products might allow the LCC of new products to be approximated quickly during the conceptual design phase without the overhead of defining new LCC models. Artificial neural networks are trained to generalize product attributes and LCC data from pre-existing LCC studies. Then the product designers query the trained artificial model with new high-level product attribute data to quickly obtain an LCC for a new product concept. Foundations fur the learning LCC approach are established, and then an application is provided.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.282-283
• /
• 2005

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권1호
• /
• pp.48-55
• /
• 1999

thermodynamic cycle analysis has been performed for the power generation systems to utilize the cold energy of liquefied natural gas (LNG). The power cycle used the air or water at room temperature as a heat source and the LNG at cryogenic temperature as a heat sink. Among manypossible configurations of the cycle. the open Rankine cycle. and the closed Brayton cycle, and the closed Rankine cycle are selected for the basic analysis because of their practical importance. The power output per unit mass of LNG has been analytically calculated for various design parameters such as the pressure ratio. the mass flow rate. the adiabatic efficiency. the heat exchanger effectiveness. or the working fluid. The optimal conditions for the parameters are presented to maximize the power output and the design considerations are discussed. It is concluded that the open Rankine cycle is the most recormmendable both in thermodynamic efficency and in practice.