• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.746-756
• /
• 2017

Marine accidents of fishing vessels occupied about 70.5% of the whole marine accidents in Korea from 1996 to 2015, this ratio was not much changed for a long time. A lot of efforts have been taken recently but marine accidents do not reduce. Therefore a fundamental counterplan to decrease accidents in fishing vessel is indispensable for reduction of whole marine accidents in Korea. Since the most frequent occurring accidents in fishing vessels were engine trouble and collision in statistics by KMST (1996~2015), the study focused on them. The cause of engine trouble were poor inspection and maintenance of the mechanical system. The greatest portion of marine accidents was collision, and the biggest cause of the collision was poor watch-keeping. The better watch-keeping will be the best way to reduce the accident. For this reason, it may be necessary for the navigator to make strict precaution on the other vessels under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the mechanical system periodically for reduction the engine trouble. Instead of penalty, incentive about safe navigation will be helpful for reduce accident as if automobile insurance would do. In order to prevent engine trouble, the fisheries federation establish the repair center. Futhermore the development of autonomous navigation system is necessary to reduce the marine accident.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.101-108
• /
• 2012

This study deals with the traffic accidents of circular intersections in Korea. The goal of this study is to develop the traffic accident models using ZAM. The main results are as follows. First, in the case of 'violating the operational method of intersection', ZINB(zero-inflatednegative binomial) models were analyzed to be the best fit to the data. Second, in the case of' no maintaining the safe distance', ZINB models were also analyzed to be the best fit to the data. Finally, such the common variables as traffic volume and width of circular roadway were selected as the independent variables. The more traffic volume and the less width of circulatory roadway were evaluated to make the more accidents. Such the specific variables as the number of approach lanes and speed reduction facilities were selected as the explanatory variables. The more approach lanes and the less speed reduction facilities were evaluated to give the more accidents. This study might be expected to give some implications to the accident research on the circular intersections.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.250-253
• /
• 2016

Car black box is saved in the video recording important to determine the cause of the accident caused a traffic accident occurred. Remote monitoring of the current black box may be monitored or transmitted to shock your smartphone as a yourself. It complements if the parties to an accident lost per injury due to an accident or mind when responding to spend the "INVITE" message using the SIP visual communication in messanger applications "Notify" to inform transferring video to a message acquaintances to check Video the accident to identify the location and check the contents and to implement and research that can respond quickly.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.82-88
• /
• 2024

As the modern maritime industry rapidly progresses through technological advancements, data processing technology is emphasized as a key driver of this development. Natural language processing is a technology that enables machines to understand and process human language. Through this methodology, we aim to develop a model that predicts the proportions of outcomes when entering new written judgments by analyzing the rulings of the Marine Safety Tribunal and learning the cause-providing ratios of previously adjudicated ship collisions. The model calculated the cause-providing ratios of the accident using the navigation applied at the time of the accident and the weight of key keywords that affect the cause-providing ratios. Through this, the accuracy of the developed model could be analyzed, the practical applicability of the model could be reviewed, and it could be used to prevent the recurrence of collisions and resolve disputes between parties involved in marine accidents.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.14-19
• /
• 2004

Boiler is a hazardous equipment to have potential explosion ail the time. And not only it has malfunction at explosion. it lead to people death but also secondary accident such as explosion and fire. Therefore, this equipment should not be broken for keeping its own function. And also, high level of safety should be kept in the process of the use not to be malfunctioned. A large scale of accident due to boiler explosion can be preventive in advance. Boiler fracture is occurred by instant expansion (approximately 1700 time) from quick evaporation of rater in boiler, due to pressure decrease in boiler Emitting energy from it is tremendous and it is so dangerous because of its high temperature. Secondary explosion such as fire is also a main hazard occurring at fuel supply place. If any devices with high pressure is broken, then not only boiler vessel but also components of it are spread with high speed, causing secondary accident. This study is to analyze integrally accident cause of fire and flue tube boiler to have occurred pressure fracture actually, to show countermeasures to prevent accident loss from the fire and flue tube boiler.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.55-62
• /
• 2014

During five years (Year 2009~2013), Total victims of 72 %(81,560 people) and those 50.6 %(1,258 people) of death accident occurs in small scale construction site which operate 2 million USD less construction budget. Especially, falling death accident account for 785 people, in the share of 33.2 %(261 people) death disaster takes due to defect of original cause materials. The major safety issues in small scale work place take place while scaffold installation, disassembling, work-plate improper installation or non-professional skills of workers. Furthermore, labor subcontract systems make small construction site shortage of resources. Those workers regard work-plate as unnecessary and consumables supplies. Because of that most of workers use unsafe workplace in most construction site. Therefore, in order to prevent falling accident occurring in small scale work site, government should organize related regulations such as "Work site safety construction method" and then expands education support, financial aid, and sourcing safety supplies for work plate which offer broad variety experiences. Also, introduce certificate solutions for various work plates to improve safety function such as anchoring type method and anti sliding function.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.251-255
• /
• 2010

A marine accident is caused various legal liability such as compensation for damages on civil law, responsibility on the Criminal Code and administrative sanctions. The results occurred by any acts is not connected directly to the legal responsibility. As a prior condition for these legal liabilities, it is required the causation between the act caused and the occurrence of the effect. It is very difficult to find out the cause in marine accidents, because of trouble of a proof security, the place occurred, time difference between accident and investigation point of time etc.. However, finding out the correct cause is an element important to prevent similar accident and to determine the liability reverted. The logical concept of the causation is not limited, but there is early necessity to limit it in the liability reverted. Therefore, this study aims to suggest reasonable standard to determine liability reverted in marine accidents.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.225-236
• /
• 2012

The Fukushima-Daiichi accident shook the world, as a well-known plant design, the General Electric BWR Mark I, was heavily damaged in the tsunami, which followed the Great Japanese Earthquake of 11 March 2011. Plant safety functions were lost and, as both AC and DC failed, manoeuvrability of the plants at the site virtually came to a full stop. The traditional system of Emergency Operating Procedures (EOPs) and Severe Accident Management Guidelines (SAMG) failed to protect core and containment, and severe core damage resulted, followed by devastating hydrogen explosions and, finally, considerable radioactive releases. The root cause may not only have been that the design against tsunamis was incorrect, but that the defence against accidents in most power plants is based on traditional assumptions, such as Large Break LOCA as the limiting event, whereas there is no engineered design against severe accidents in most plants. Accidents beyond the licensed design basis have hardly been considered in the various designs, and if they were included, they often were not classified for their safety role, as most system safety classifications considered only design basis accidents. It is, hence, time to again consider the Design Basis Accident, and ask ourselves whether the time has not come to consider engineered safety functions to mitigate core damage accidents. Associated is a proper classification of those systems that do the job. Also associated are safety criteria, which so far are only related to 'public health and safety'; in reality, nuclear accidents cause few casualties, but create immense economical and societal effects-for which there are no criteria to be met. Severe accidents create an environment far surpassing the imagination of those who developed EOPs and SAMG, most of which was developed after Three Mile Island - an accident where all was still in place, except the insight in the event was lost. It requires fundamental changes in our present safety approach and safety thinking and, hence, also in our EOPs and SAMG, in order to prevent future 'Fukushimas'.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.39-42
• /
• 1981

Recent changes in the cause of death among the Korean population seem to be systematic and significant. Data on cause of death from the medically certified death certificates provide at least four types of evidence: a sudden increase in recent years in the numbers of death due to cerebrovascular disease or circulatory diseases including rheumatic fever and chronic heart diseases and atherosclerosis; increasing steadily in the numbers of death due to malignant neoplasm of various sites, and death due to accident; decreasing steadily in the numbers of death due to communicable diseases or parasite diseases; and a large number of deaths with unspecified symptoms and ill-defined conditions. The lack of complete registration of the deads occurred or the incomplete description on the cause of death reported suggests that statistical information of cause of death from the medically certified death records is meaningful in interpreting changing patterns.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.101-115
• /
• 2000

Whenever a disaster occurs, people emphasizes that "Safety management is most important thing in the company". However, a situation of safety management is not changed dramatically after accidents in the past. Many small-and-medium sized industries neglect the importance of safety management. Current situation can be easily figured out when looks up an occurrence rate of accident, accident frequency rate and intensity rate. This paper investigated what workers of hotel-related industries think of a safety and types of accidents, effect of a safety education. On-site-survey was conducted for actual workers in four deluxe hotels and one condominium. 207 persons out of 400 people were replied. Statistical analysis was performed with SAS package about their reply. In injured type, cut from knife was most frequent. Main cause of accident was a unsafe posture and a unsafe behavior, so more safety education for these workers are necessary. In a physical pain which related with job, chronical pain was most dominant. As a result, a safety education has a high correlation with an experience of injured and treatment of safety, Cooking department has highest occurrence of accident than any other departments. Workers with an experience of five to ten years have most lowest treatment of safety, aid of safety education, safety feeling of their working environment, so peer attention must be put on these people to reduce accidents.accidents.