• 제목/요약/키워드: The carrier

검색결과 6,836건 처리시간 0.033초

국가 역량을 고려한 효율성 기반 한국형 항공모함 규모 최적화 연구 (A Study on the Scale Optimization of the Korean-type Aircraft Carrier based on Efficiency Considering National Competency)

  • 정병기;김기태;박성제
    • 산업경영시스템학회지
    • /
    • 제45권3호
    • /
    • pp.49-56
    • /
    • 2022
  • ROK Navy intends to secure the Korean-type aircraft carrier in order to effectively prepare for various future security threats. In general, the Korean national competency is considered to be at the level of having an aircraft carrier, but it is unclear what scale aircraft carrier would be appropriate. In this study, the efficiency was evaluated through the relative comparison between national competency(national power, economic power) and the scale of aircraft carriers, and the optimal scale of the Korean-type aircraft carrier that could be acquired was presented. A DEA(Data Envelopment Analysis) model was applied to aircraft carriers(19 aircraft carriers in 11 countries) currently in operation and scheduled to be possessed in the world. As input variables, CINC(Composite Index of National Capability) and GDP(Gross Domestic Product), which are the most widely used as indicators of national and economic power, and as output variables, the full-load displacement, length, and width of aircraft carriers were selected. ARIMA(short-term within 5 years) and simple regression(long-term over 5 years) were used to estimate the future national competency of each country at the time of aircraft carriers acquisition. The relative efficiency score of the Korean-type aircraft carrier currently being evaluated is 1.062, and it was evaluated as small-scale aircraft carrier compared to the national competency. Based on Korean national competency, the optimal scale of the Korean-type aircraft carrier calculated by aggregating benchmark groups, is 58,308.1 tons of full-load displacement, 279.4m in length, and 68.3m in width.

Receiver Design for Satellite Navigation Signals using the Tiered Differential Polyphase Code

  • Jo, Gwang Hee;Noh, Jae Hee;Lim, Deok Won;Son, Seok Bo;Hwang, Dong-Hwan;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제10권4호
    • /
    • pp.307-313
    • /
    • 2021
  • Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.

The Effect of Asynchronous Carrier on Matrix Converter Characteristics

  • Oyama, Jun;Higuchi, Tsuyoshi;Abe, Takashi;Yamada, Eiji;Hayashi, Hideki;Koga, Takashi
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.512-517
    • /
    • 1998
  • In a matrix converter, input side and output side are coupled with each other through switching elements. Since disturbances on either side affect directly on the other side, it requires a high-speed on-line control system to compensate them. We proposed in previous papers a new control strategy and an on-line control circuit for a matrix converter. The control circuit could keep the output voltage at commanded value against fluctuation in the supply voltage. Furthermore wave forms of the output voltage and the input current were always kept sinusoidal. The switching pattern was generated by comparing modified voltage references with a carrier. The carrier was synchronized with the supply voltage using a PLL system, which made the control circuit complicated and costly. This paper discusses on the possibility of an asynchronized carrier. Experiment results show the input current distortion in case of asynchronous carrier is bigger than that of synchronous carrier. However, the deterioration can be minimized by increased carrier frequency.

  • PDF

펨토초급 극초단 펄스레이저에 의해 가열된 실리콘 내의 열전달 특성에 관한 수치해석 (Numerical Analysis on Heat Transfer Characteristics in Silicon Boated by Picosecond-to-Femtosecond Ultra-Short Pulse Laser)

  • 이성혁;이준식;박승호;최영기
    • 대한기계학회논문집B
    • /
    • 제26권10호
    • /
    • pp.1427-1435
    • /
    • 2002
  • The main aim of the present article is numerically to investigate the micro-scale heat transfer phenomena in a silicon microstructure irradiated by picosecond-to-femtosecond ultra-short laser pulses. Carrier-lattice non-equilibrium phenomena are simulated with a self-consistent numerical model based on Boltzmann transport theory to obtain the spatial and temporal evolutions of the lattice temperature, the carrier number density and its temperature. Especially, an equilibration time, after which carrier and lattice are in equilibrium, is newly introduced to quantify the time duration of non-equilibrium state. Significant increase in carrier temperature is observed for a few picosecond pulse laser, while the lattice temperature rise is relatively small with decreasing laser pulse width. It is also found that the laser fluence significantly affects the N 3 decaying rate of Auger recombination, the carrier temperature exhibits two peaks as a function of time due to Auger heating as well as direct laser heating of the carriers, and finally both laser fluence and pulse width play an important role in controlling the duration time of non-equilibrium between carrier and lattice.

Analysis of Facilitied Transport through Fixed Site Carrier Membranes

  • Kang, Yong-Soo;Hong, Jae-Min;Kim, Un-Young
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 제3회 심포지움 (분리막 연구의 최신동향)
    • /
    • pp.57-71
    • /
    • 1995
  • A simple mathematical model for gacilitated mass transport with a fixed site carrier membrane was derived by assuming an instantaneous, microscopic concentration (activity) fluctuation, The concentration fluctuation, developed due to reversible chemical reaction between carrier and solute, could acuse the higher chemical potential gradient and the facilitated transport. For mathematical formulation, an analogy was employed between the mass transfer for the facilitated transport with fixed site carrier membrane and the electron transfer in a parallel resistor-capacitor (RC) circuit. For the single RC model, it was assumed that a single capacitor represented the total carrier and a solute could not inter-diffuse between matrix and carrier, allowing only two diffusional pathways, This assumption was relaxed by adopting a serial combination of the parallel RC circuit. Here, a solute diffuses in two elements (matrix or carrier) can exchange its pathway, exhibiting four diffusional pathways. The current models were examined against experimental data and the agreement was exceptional.

  • PDF

다층형 결합 선로를 이용한 반송파 복원 회로 설계 제작 (Design and fabrication of PSK carrier recovery circuit using multi-layer coupled line)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제13권10호
    • /
    • pp.2039-2044
    • /
    • 2009
  • 본 논문에서는 다층형 결합 선로를 이용한 PSK 반송파 신호 복원 회로를 해석하고 설계 제작한다. 다층형 결합 선로 구조의 coupled line으로 구성되는 반송파 복원 6단자 소자는 다층형 구조를 가지며, 수신 전처리부의 6 단자 위상 상관기 구조와 동일한 구조를 갖는 일원화된 수신 구조 구현이 가능하다. 아울러 다층 결합 선로 6 단자 위상 상관기를 이용한 RML 기반 다중 모드 동기 복조형 반송파 신호 복원이 가능한 다층형 결합 선로 반송파 복원 회로 구조를 제안한다. 설계 제작된 다층형 결합 선로 구조 반송파 복원회로에 의한 직교 위상편이 방식 신호의 반송파 신호는 일정한 위상값과 반사 소자에 의해 발생되는 ${\pm}3o$ 이내인 위상차를 갖는 양호한 PSK 반송파 신호 특성을 나타내었다.

Treatment of produced water in a floating carrier bioreactor

  • Ezechi, Ezerie Henry;Sapari, Nasiman;Menyechi, Ezerie Jane;Ude, Clement M.;Olisa, Emmanuel
    • Environmental Engineering Research
    • /
    • 제22권2호
    • /
    • pp.210-215
    • /
    • 2017
  • Produced water is the largest wastestream of oil and gas exploration. It consists of various organic and inorganic compounds that hinder its beneficial use. This study compared the treatment of produced water in a batch suspended and biofilm activated sludge process. The biofilm carrier material was made from Gardenia Carinata shell. COD, $NH_4{^+}-N$ and $NO_3-N$ removal was monitored in both the suspended (control) and floating carrier bioreactors. The results show a rapid reduction of produced water constituents in the floating carrier bioreactor. COD, $NH_4{^+}-N$ and $NO_3-N$ removal was in the range of 99%, 98% and 97% for the floating carrier bioreactor whereas it was 88%, 84% and 83% for the control bioreactor. The rapid reduction of COD, $NH_4{^+}-N$ and $NO_3-N$ clearly indicate that the floating carrier materials served as an attached growth medium for microorganisms, improved the breakdown of produced water constituents and reduced inhibition of microbial metabolic activities.

다공성 석탄회 담체를 이용한 연속류식 고정 생물막 공정의 폐수 처리 특성 (Characteristics of Wastewater Treatment by the Continuous-Flow Fixed Biofilm Process Using Porous Fly Ash Carrier)

  • 류재춘;김영호;양현수;곽두원;유성준
    • 공업화학
    • /
    • 제16권2호
    • /
    • pp.200-205
    • /
    • 2005
  • 우리는 이전의 연구에서 석탄회를 이용하여 높은 미생물 담지능과 양이온에 대한 흡착능을 가지는 다공성 담체를 제조하였다. 본 연구는 다공성 석탄회 담체를 사용한 폐수 처리 생물막 공정 개발을 목적으로 실험실 규모의 연속류식 고정층 생물막 공정에 의한 돈사 폐수 처리 특성을 상용 미생물 담체 및 기존의 활성슬러지법과 동일 조건에서 비교 고찰하여 보았다. 실험 결과로서 제조한 석탄회 담체는 COD, TN, $NH_4{^+}-N$ 항목의 평균 제거율이 각각 80%, 77%, 65%로서 상용 담체 및 기존의 활성 슬러지 공정과 비교하여 높은 제거율을 나타내었다. 처리 후 미생물 담지량을 측정해 본 결과 상용 담체에 비해 높은 값을 나타내었으며, SEM 관찰 결과 석탄회 담체에 미생물 군집이 안정하게 형성되었음을 확인할 수 있었다.

라이시안 페이딩 채널에서 공간 다이버시티를 적용한 Pilot Symbol Assisted Multi-Carrier CDMA BPSK 시스템의 성능 분석 (Performance Analysis of Pilot Symbol Assisted Multi-Carrier CDMA BPSK System with Space Diversity in Rician Fading Channels)

  • 노재성;오창헌;김언곤;조성준
    • 한국통신학회논문지
    • /
    • 제26권6A호
    • /
    • pp.913-922
    • /
    • 2001
  • Multi-Carrier CDMA 시스템에서 불완전한 채널 예측과 다중사용자 간섭은 시스템의 성능 저하를 유발한다. 본 논문에서는 역방향 링크에서 파일럿 심볼을 이용하여 채널을 예측하는 Multi-Carrier CDMA BPSK 시스템에서 불완전한 채널 예측과 다중사용자 간섭의 영향을 연구하였다. 더욱이, 라이시안 페이딩 채널의 역방향 링크에서 최대비 합성 공간 다이버시티와 선택 합성 공간 다이버시티 기법을 적용한 성능 개선에 대하여 연구하였다. 수치계산 결과, 파일럿 심볼을 이용하여 채널을 예측하는 Multi-Carrier CDMA BPSK 시스템의 BER 성능은 등가 잡음 대역폭의 분산($\sigma$$^2$$_{c}$)에 매우 민감하나 무선 채널에서의 신호 전력 대 잡음 전력비에는 그리 심하지 않았다. 불완전한 채널 예측에 의한 BER 열화와 파일럿 심볼 간격의 최적화는 라이시안 페이딩 채널에서 Multi-Carrier CDMA BPSK 시스템의 BER 계산을 통하여 얻을 수 있었다. 그리고 불완전한 채널 예측에 의한 BER 열화는 신호 전력 대 잡음 전력비와 채널 예측 필터의 등가 잡음 대역폭에 관계하고 있음을 알 수 있었다.

  • PDF

SS 다중반송파 변조방식을 이용한 효율적인 차량 에드혹 네트워크 거리측정 기법 (An Efficient Vehicular Ad-hoc Networks and Ranging System Using Spread Spectrum Multi-carrier Modulation Scheme)

  • 김영안
    • 한국통신학회논문지
    • /
    • 제34권7A호
    • /
    • pp.554-561
    • /
    • 2009
  • 본 논문에서는 통신과 거리측정을 동시에 행하는 대역확산방식을 이용한 VANET에서의 거리측정 시스템에 다중반송파(Multi-Carrier) 변조방식을 적용한 시스템을 제안한다. 기존방식에서는 자기차량이 송신한 PN신호에 상대차량의 정보를 실어서 재송신하고 자기차량은 대역확산에 의해 상대차량 정보를 파악하였으며, 동시에 송수신한 PN신호의 위상차를 탐지허여 차량거리를 정확하게 측정하는 것이 가능했다. 그러나 그 차량거리 측정의 문제점으로서 위상차의 탐지 오차와 분석 능력을 높이기 위해 고속 PN신호가 펼요할 수밖에 없다. 제안 시스템은 이러한 문제점 해결을 위해 다중반송파 변조방식을 적용했다. 다중반송파 변조방식은 단일반송파와 비교해서 Chip rate이 작은 PN신호를 사용함으로 단일반송파와 동일한 주파수 대역에서 복수의 반송파 이용이 가능하다. 복수의 반송파는 등이득 합성법에 의해 합성되기 때문에 다이버시티 효과가 얻어져 위상차의 에러검출을 방지하는 것이 가능하고 정밀 거리측정도 기존방식과 비교해서 우수하게 개선되었다.