• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.502-513
• /
• 2004

This paper proposes a symbol synchronization method in the IEEE 802.11a wireless OPDM system, which uses only signs of the in-phase and the quadrature signals in the short preamble. The short preamble is sampled with 2 tines of Nyquist sampling rate and both of the autocorrelation and the cross-relation are used in the proposed method. This method has some advantages that the ACG (Automatic Gain Control) can be processed concurrently during the short preamble and its implementation is not much complicated. The proposed symbol synchronization method is verified through simulations on frequency offset, multi-path and white Gaussian noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.117-122
• /
• 2006

In this paper, we present a simple and general soft bit decision expression for a Gray coded PAM signal over additive white Gaussian noise(AWGN) channel with the log likelihood ratio(LLR). In order to reduce the complexity of the LLR calculation, we make the bitwise LLR expression simple by replacing the mathematical max functions of the conventional Max-Log-MAP expression with simple arithmetic functions associated with some deterministic parameters, such as a received value and distance between symbols on a signal space. Taking the implementation issues, like the area of silicon, the power consumption, the timing latency, and so on, into consideration, we submit that the proposed method is a promising alternative way to conventional methods for reconfigurable systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.69-76
• /
• 2018

This paper studies the Turbo Codes, the concatenation of Turbo Codes and Reed-Solomon (RS) codes on Orthogonal frequency-division multiplexing (OFDM) in digital communication channel, and then analysis the performances of the new concatenated Forward Error Correct (FEC) scheme applied to an OFDM system based on the digital terrestrial video broadcasting (DVB-T) scheme. We compared the results with the standard DVB-T convolutional codes performances on Additive White Gaussian Noise (AWGN) channels. The simulation results shown that by employing turbo codes with only a few numbers of iterations, the performances of the overall system can be improved significantly. These results will be obtained by applying an appropriate interleaver technique in the concatenated FEC procedure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.587-593
• /
• 2010

In this paper we design an irregular low-density parity-check (LDPC) code for multiple-input multiple-output (MIMO) system, using a simple extrinsic information transfer (EXIT) chart method. The MIMO systems considered are optimal maximum a posteriori probability (MAP) detector. The MIMO detector and the LDPC decoder exchange soft information and form a turbo iterative receiver. The EXIT charts are used to obtain the edge degree distribution of the irregular LDPC code which is optimized for the MIMO detector. It is shown that the performance of the designed LDPC code is better than that of conventional LDPC code which was optimized for either the Additive White Gaussian Noise (AWGN) channel or the MIMO channel.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.203-213
• /
• 2004

This study investigates the seismic responses of two structures connected by a sky-bridge equipped with viscoelastic dampers (VED) at the bridge-building connections. The applicability of the method is verified first by observing RMS (root-mean-squared) responses of two-degrees-of-freedom systems subjected to white noise ground excitation. Then model structures with various number of stories are analyzed using earthquake ground motions to observe the effect of the varying size of VED on the reduction of dynamic responses. According to the analysis results, there exists a proper size of VED which minimizes the structural responses. It is also observed that the effectiveness of VED increases as the difference of natural frequencies between the two connected structures increases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.568-580
• /
• 1997

In this paper we evaluate the performances of two types of 16-QAM system such as square QAM and star QAM. First we analyze the performances of QAM systems under AWGN(adaptive white Gaussian noise) and afterward analyze the performances under fading environments. The performances of QAM systems in case of using the PSAM(Pilot Symbol Assisted Modulation) are finally evaluated under fading environments. In conclusion, the Square QAM's performance is better than star QAM in AWGN. But the performances of the both QAM systems are very poor under the fading environments. QAM performance using the PSAM system is verified to be improved in that case, and the star QAM's performance is better than square QAM.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.759-777
• /
• 2008

A wireless sensing system is designed for application to structural monitoring and damage detection applications. Embedded in the wireless monitoring module is a two-tier prediction model, the auto-regressive (AR) and the autoregressive model with exogenous inputs (ARX), used to obtain damage sensitive features of a structure. To validate the performance of the proposed wireless monitoring and damage detection system, two near full scale single-story RC-frames, with and without brick wall system, are instrumented with the wireless monitoring system for real time damage detection during shaking table tests. White noise and seismic ground motion records are applied to the base of the structure using a shaking table. Pattern classification methods are then adopted to classify the structure as damaged or undamaged using time series coefficients as entities of a damage-sensitive feature vector. The demonstration of the damage detection methodology is shown to be capable of identifying damage using a wireless structural monitoring system. The accuracy and sensitivity of the MEMS-based wireless sensors employed are also verified through comparison to data recorded using a traditional wired monitoring system.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.317-319
• /
• 1996

In this paper, an active vibration control system using a voice coil type linear oscillating actuator(LOA) is studied to suppress structural vibration. Being compared with a hydraulic actuator, a LOA has simplified structure and requires a few elements in the driving system, so it has lots of merits with respect to economics and maintenance. The general mathematical dynamic model to obtain the algorithm for the realization of vibration active control system is treated. Actually, the performance test of the control system using LOA is carried out on a steel test structure under sinusoidal and white noise excitation. From this test it is conformed that acceleration level of test structure is reduced near the resonance region. In the future research on the application to large structures will be studied.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2003

In this paper we propose an efficient method to broadcast digital television signals using Single Frequency Networks (SFNs) in the Advanced Television Systems Committee (ATSC) transmission systems. Since the proposed schemes to synchronize multiple transmitters minimize the changes from the conventional ATSC system, the hardware complexity for the changes is very low. Our simulation results show that the proposed scheme makes less than 0.1 dB degradation at the threshold of visibility (TOV： BER= 3$\times$$10^{-6}$) in the additive white Gaussian noise (AWGN) channel. It is possible to reduce the performance degradation by increasing an initialization period of the proposed scheme.