• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.13-16
• /
• 2016

Morphology and formation processes of lamellar grain boundaries in titanium rich binary TiAl intermetallics were studied. TiAl alloys containing aluminum content of 44 to 48 at.% were induction-heated to 1723 K followed by helium-gas-quenching at various temperatures. For the Ti-44%Al, few lamellae were observed in samples quenched from higher than 1473 K. Although small peaks of beta phase were detected using X-ray diffraction, only the ordered hexagonal phase (${\alpha}_2$) with clear APB contrast was observed in TEM observation. For the Ti-48 at.%Al alloy, almost no lamellar structure, and straight grain boundaries were observed in samples quenched from higher than 1623 K. The formation of lamellae along grain boundaries was observed in the sample quenched from 1573 K. The fully lamellar microstructures with serrated boundaries were observed in samples quenched from lower than 1473 K. It was found that the formation of ${\gamma}$ platelets took place at higher temperatures in Ti-48 at.%Al than in Ti-44 at.%Al. Although the size of the serration is different, serrated lamellar grain boundaries could be obtained for all alloy compositions employed. The serration appeared to be due to the grain boundary migration induced by precipitation and growth of ${\gamma}$. Differences in transformation characteristics with aluminum content are discussed.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.34-35
• /
• 1996

The diffusional behavior of many non-solvents in glassy or semicrystalline polymers cannot be adequately described by a concentration-dependent form of Fick's law, especially when mass transfer is coupled with structural changes. Many mathematical models have been devised to interprete non-Fickian diffusion dominated by relaxation kinetics. In formulation of non-Fickian diffusion mathematics, therefore, the most important factor to consider is how relaxation effects can influence the governing constitutive equation and boundary conditions. That is, relaxation parameters can be accommodated by variable boundary conditions or a modified continuity equation, or both, depending on specific systems and conditions (Frish, 1980). Accoring to Astarita and Nicolais (1983), the model equations can be broadly categorized as continuous or discontinuous. Continuous model equations encompass phenomena where the structural change takes place gradually over the whole volume of the polymer sample (Crank, 1953; Long and Richman, 1961; Berens and Hopfenberg, 1978). On the other hand, discontinuous model equations deal with the phenomena where the morphological change appears to be abrupt (Li, 1984). Four mathematical models with different relaxation parameters were applied to fit the anomalous sorption data observed in fluoropolymers (PVDF, ECTFE). The fitted result for PVDF-benzene sorption data is shown in Fig. 1.

• KIEAE Journal
• /
• 제9권2호
• /
• pp.37-42
• /
• 2009

Eco-village is emerging as one of housing styles in the modern age. The common space in Eco-village uses environment-friendly materials while residents appear to aspire to a community. The common space in Eco-village offers a place of interchange and interaction for both visitors and residents as a transit area connecting dwelling units. It also forms the sense of community and serves as a space that builds friendly relations among residents. However, there seems to be a lack of research compare to its various roles and importance for this common space, which is an significant factor in establishing Eco-village plans. The purpose of this study is to provide research data by creating a layout drawing of Eco-village and reveal the characteristics of space boundary and practical use of common space through case studies on villages. This will serve as actual data in designing common space which would correspond to the purpose of Eco-village planning.

• 한국실내디자인학회논문집
• /
• 제17권4호
• /
• pp.92-101
• /
• 2008

A new paradigm of design lays stress on the world of metaphysical concepts, and various attempts are being made to give meaning to psychological values. Hotel is a memorable place to remind of a special moment in one's life such as travel, marriage, meeting and so on. It also contains even more symbolism than other spaces as it is the place where the most primary and private act takes place apart from one's residence. As a result, it is also possible to communicate the message which a designer intends to convey through the user's recognition in the form of various symbolic expressions in space design. The designer communicates a meaning into a space through a symbolic system and creates a mutual consensus by means of the understanding structure of "designer-space-user". The user's diverse interpretations through a symbol are based on epistemology and consist of the primary, the secondary and the tertiary recognition structure system in the aspect of their contents. The primary structure depends on sensual perception, impressive idea and transcendental recognition based on metaphysical and perceptional association. The secondary structure includes casualty, continuous deduction and rational(integral) recognition. Finally, the tertiary structure is sublimation to the transcendental mental world beyond the boundary of emotion and it is classified into fundamental recognition structure on an object and archetypical recognition structure on an ego. These characteristics can derive systematic understandings and diverse interpretations on the symbol from the space of a hotel through the frame of analysis based on the artistic form of monosemous, polysemous and multidimensional frameworks and symbols. The framework of this analysis includes all the cases, and various methods which haven't been attempted in practice are presented. Therefore this study is not just a simple analysis of space but rather it will serve as a methodological tool for design that allows for various attempts of symbolic design concepts in the recognition structure system.

• 대한가정학회지
• /
• 제44권8호
• /
• pp.181-198
• /
• 2006

The purpose of this study is to understand modernization process of korean housing during the past one century. To following up the changes of everyday lives of common peoples, magazines, news papers, tourist's records and gossip items were collected and interpreted from the microscopic point of view. In this study arguments on 'modernity' of korean housing was focused on some issues, thus, separation, differentiation, individualization, as well as privatization. Concrete discourses are; firstly, spatial isolation of housing and urban place each other, secondly, functional division of inner spaces of housing, and lastly, guarantee of privacy sphere. Historical changes of housing showed some meaningful phenomena. Before modernization housing was place of reproduction and consume at the same time. However after modern urban space came into existence and work and rest were separated, housing gained only mono function. Thus, housing have only one meaning as private place for nuclear family, that is "Home, Sweet Home." Instead of past multi-functional rooms, functional prescribed rooms, for example, dinning room, were newly born. In the past, the boundary between public and private sphere was not clear. For examples, everyday experiences of family were extended to the street and in the house in most cases spaces were shared. But after modernization the scale of individual spaces become larger and private life can be secured. Consequently, history of everyday life from traditional agricultural society to industrialized modern society demonstrates the structural context between the micro and macro dimension in the fields of human life. In other words, everyday lives and macro history response each other and create new perception of time-space structure in the modern housing.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1088-1095
• /
• 2009

In this paper, we describe the reorientation method of distorted road sign by using projection transformation for improving recognition rate of road sign. RSR (Road Sign Recognition) is one of the most important topics for implementing driver assistance in intelligent transportation systems using pattern recognition and vision technology. The RS (Road Sign) includes direction of road or place name, and intersection for obtaining the road information. We acquire input images from mounted camera on vehicle. However, the road signs are often appeared with rotation, skew, and distortion by perspective camera. In order to obtain the correct road sign overcoming these problems, projection transformation is used to transform from 4 points of image coordinate to 4 points of world coordinate. The 4 vertices points are obtained using the trajectory as the distance from the mass center to the boundary of the object. Then, the candidate areas of road sign are transformed from distorted image by using homography transformation matrix. Internal information of reoriented road signs is segmented with arrow and the corresponding indicated place name. Arrow area is the largest labeled one. Also, the number of group of place names equals to that of arrow heads. Characters of the road sign are segmented by using vertical and horizontal histograms, and each character is recognized by using SAD (Sum of Absolute Difference). From the experiments, the proposed method has shown the higher recognition results than the image without reorientation.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제26권1호
• /
• pp.43-58
• /
• 1998

The Kwinana Shoreline Fumigation Experiment (KSFE) took place at Fremantle, WA, Australia between January 23 and February 8, 1995. The CSIRO DAR LIDAR measured plume sections from near the Kwinana Power Station (KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminum-garnet (Nd:YAG) laser operating at a fundamental wavelength of 1064 nm, with harmonics of 532 nm and 355 nm. For these experiments the third harmonic was used because the UV wavelength at 355 nm is eye safe beyond about 50 m. The laser fires a pulse of light 6 ns in duration (about 1.8 m long) and with an energy (at the third harmonic) of about 70 mJ. This pulse subsequently scattered and absorbed by both air molecules and particles in the atmosphere. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detected by a photo-multiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The smoke plume was clearly identifiable in the scans both before and after fumigation in the thermal internal boundary layer (TIBL). Both power station plumes were detected. Over the 9 days of operation, 1,568 plumes scans (214 series) were performed. Essentially all of these will provide instantaneous plume heights and widths, and there are many periods of continuous operation over several hours when it should be possible to compile hourly average plume statistics as well. The results of four days LIDAR observations of the dispersion of smoke plume in the TIBL at a coastal site are presented for the case of stages A and C.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1996년도 봄 학술발표회 초록집
• /
• pp.22-22
• /
• 1996

;The Kwinana Shoreline Fumigation Experiment(KSFE) took place in Fremantle, WA, Australia between 23 January and 8 February, 1995. All measurement systems performed to expectation. The CSIRO DAR(Division of Atmospheric Research) LIDAR measured plume sections from near the Kwinana Power Station(KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. Radiosonde and double theodolite sounding systems measured temperature, humidity, air pressure and wind structure at the coast(Woodman Point) and at the inland(ALCOA residue dump) site at intervals of roughly two hours. These were supplemented by mid afternoon soundings(radiosonde and single theodolite) by Department of Environmental Protection(DEP) at Swanbourne. The Flinders aircraft measured wind, turbulence and temperature structure of the atmospheric boundary layer, concentrations of $C0_2,\;0_3,\;S0_2\;and\;NO_x$ in the smoke plumes and surface radiation over both land and sea. CSIRO DCET(Division of Coal and Energy Technology) vehicle successfully interceptde many smoke plumes and using a range of tracers will be able to identify the various sources much of the time. Routine data from the DEP and Kwinana Industrial Council(KIC) air quality monitoring networks were also automatically logged. Murdoch University measured surface heat flux at Hope Valldy monitoring station and also at Wattleup monitoring station for the last five days. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminumgarnet(Nd:Y AG) laser operating at a fundamental wavelength of 1064 nm, with harmonics fo 532 nm and 355 nm. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detedted by a photomultiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The results of nine days special field observations are summarized in detail.etail.

• 한국산업정보학회논문지
• /
• 제5권1호
• /
• pp.77-86
• /
• 2000

최근 들어 산업현장에서는 생산성의 향상, 노무비의 증가 및 노동력의 부족, 안전성 등을 이유로 자동생산시스템과 운반용 동력기계와 같은 기구를 도입하여 작업자 스스로가 자신의 근력을 이용한 인력운반(Manual Materials Handling : MMH) 작업이 줄어들고 있는 추세라고 하지만, 실제로 비탈진 경사면에 위치한 농장이나 과수원, 항만부두의 하역작업, 경사진 벌목장 작업, 광산의 막장에서의 작업등과 같이 주변환경이 복잡한 현장에서의 작업은 기계로 완전히 대체하기가 어려운 실정이다. 그러므로, 이러한 작업현장에서는 인간이 직접 손 운반작업(들기 작업)을 할 수밖에 없으며, 이와 같은 경사면에서의 손 운반작업(들기 작업)은 작업자에게 많은 재해의 위험성을 만들어 주며, 추락으로 인한 산업재해는 물론이고 미끄러짐 방지 같은 신체균형잡기 노력은 근골격 계통에 과도한 무리를 주게 되어 LBP의 원인이 되기도 한다. 하지만, 이러한 경사면에서의 손 운반작업(들기 작업)에 대한 연구에 대해서는 거의 없는 실정이다. 따라서, 본 연구에서는 force platform을 이용하여 경사면에서의 손 운반작업(들기 작업)을 통한 COP변화를 측정 ·분석하여 작업자들의 산업재해를 예방하고자 하며, 향후 이러한 기초 자료를 통하여 손 운반작업(들기 작업)뿐만 아니라 그 밖의 응용분야에 기여하고자 한다.