• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.222-227
• /
• 2008

This study is focused on an integrated numerical modeling enabling one to investigate the dynamic behavior and failure of 2-D textile composite and 3-D orthogonal woven composite structures weakened by micro-cracks and subjected to an impact load. The integrated numerical modeling is based on: I) determination of governing equations via a three-level hierarchy: micro-mechanical unit cell analysis, layer-wise analysis accounting for transverse strains and stresses, and structural analysis based on anisotropic plate layers, II) development of an efficient computational approach enabling one to perform transient response analyses of 2-D plain woven and 3-D orthogonal woven composite structures featuring the matrix cracking and exposed to time-dependent loads, III) determination of the structural characteristics of the textile-layered composites and their degraded features under various geometrical yarn shapes, and finally, IV) assessment of the implications of stiffness degradation on dynamic response to impact loads.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.59-64
• /
• 2019

In recent years, the HP-CRTM method, which has the ability to produce carbon fiber-reinforce plastic composites at high speeds, has come into the spotlight in the automotive parts industry, which demands high productivity. Multi-axial carbon fabric, an intermediate material used in this HP-CRTM molding process, consists of layered fibers without crimp, which makes it better in terms of tensile and shear strength than the original woven fabrics. The NCF (non-crimp fabric) can form the layers of the carbon fiber, which have different longitudinal and lateral directions, and ${\pm}{\theta}$ degrees, depending on the product's properties. In this research, preforms were made with carbon fibers of ${\pm}45^{\circ}$ and $0/90^{\circ}$, which were lamination structures under seven different conditions, in order to create the optimal laminated structure for automobile reinforcement center floor tunnels. Carbon fiber composites were created using each of the seven differently laminated preforms, and polyurethane was used as the base material. The specimens were manufactured in accordance with the ASTM D3039 standards, and the effect of the NCF lamination structure on the mechanical properties was confirmed by a tensile test.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.38-50
• /
• 2018

This investigation reported the recent development of 3 dimensional fabrics such as spacer fabric, 3 dimensional multi-layered fabric and 3 dimensional braided fabric. First, we categorized 3 dimensional fabrics into 3 main products; 3 dimensional woven fabrics, 3 dimensional knitted fabrics and 3 dimensional braided fabrics with reviewing the possible main applications. We also reported the research and development trends of 3 dimensional fabrics by analyzing technical trends in industry and research institutes at domestic and overseas. United State, Germany and Japan lead the manufacturing technology for the mainly preform related products to apply in aerospace, automotive, protections, architecture and clothing applications. Lastly, we reviewed the main products of the leading company which manufactured using the 3 dimensional fabrics.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.112-118
• /
• 2020

This paper examined the water repellency, water proofing and water vapor permeability of twelve types of woven fabrics for sports wear clothing. Their physical properties were compared and discussed with the fabric structural parameters and surface finishing effect. A water repellent property of 100% was obtained in the coated or laminated water repellent finished fabrics; in addition, cotton/nylon breathable composite fabrics treated with a laminated finishing and with low fabric density showed a 90% water repellency. Water proofing fabric above 6,000 mm H₂O hydraulic pressure was achieved by coated or laminated finishing; however, high density fabric or medium-level coated fabrics exhibited 100% water repellent and low water proofing characteristics. Superior water vapor permeability characteristics with good water repellency and proofing properties were achieved at the 2.5 layered low density and with 0.7 - 0.9 cover factor nylon fabrics treated with hydrophilic laminated finishing. The regression analysis for examining the effects of fabric structural parameters and surface finishing such as coating and laminating to the water vapor permeability exhibited a high determination coefficient of fabric structural parameters of 63.5%; in addition,, main factors among fabric structural parameters appeared to be cover factor and fabric thickness per weight. Coating and Laminating factors exhibited determination coefficient of water vapor permeability parameters of 36.5%.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.20-34
• /
• 2023

수 나노미터의 두께의 단일 또는 여러 층으로 구성된 2차원 소재는 전기전도성, 유연성, 광학적 투명성 등의 고유한 특성으로 많은 연구 분야에서 활용되고 있다. 이 중 Electronic skin (E-Skin)이나 Smart Textile 과 같은 반복적인 기계적 동작이 수반될 수 있다. 또한, 온도, 습도, 압력과 같은 외부적 요인에 노출이 되는 경우가 빈번하다. 이 때, 소자의 내구성과 수명 저하를 유발하기 때문에 자가 치유 특성이 내포된 소자를 제작하기 위한 연구가 많이 이루어지고 있다. 최근 다양한 2차원 소재 중 자가 치유 기능을 구현할 수 있는 Ti₃Ci₂Ti_x MXene 기반 전극의 복합 소재의 연구 결과가 학계의 주목을 받고 있다. 본 논문에서는 Ti₃Ci₂Ti_x MXene의 다양한 합성 방법 및 특성에 대해 소개한 후, Ti₃Ci₂Ti_x MXene 전극 기반의 자가 치유 적용 기술 사례에 대해 알아보고자 한다.