• 한국측량학회지
• /
• 제39권6호
• /
• pp.525-531
• /
• 2021

도시집중화 현상으로 지하공간의 중요성과 활용이 증가하고 있으며 이에 따라 지하공간정보가 구축되고 있다. 지하공간정보는 국민의 생명과 안전에 직접 영향을 미치는 중요한 국가공간정보기반인프라이기 때문에 구축에 사용되는 지하공간 탐사기기의 정확도와 성능을 별도로 관리하고 있다. 이를 위해 공간정보관련 법령에 의거 국가에서는 지하시설물 측량기기 성능검사를 실시하고 있다. 현재 국내 국가공인 지하시설물 탐사장비 검사장으로는 국토지리정보원이 위탁운영을 허가한 성균관대학교 수원캠퍼스에 위치한 지하시설물 탐사장비 검사장이 유일하다. 하지만 지금의 성능검사장은 주로 금속관로를 대상으로 하고 있으며 절대위치측량 검사체계가 없으며 또한 지형측량에 따른 관로의 절대높이값을 확인할 수 있는 체계가 아니다. 이에 본 연구에서는 국내의 지형 및 지질조건과 매설된 지하시설물의 다양한 재료, 형태 등을 고려한 지하공간탐사기기 성능검사 테스트베드 모델을 제시한다. 본 연구를 통해 제시하는 지하정보정밀탐사 실증 테스트베드는 기존의 국내의 시험현장이 지닌 한계를 보완하고 최신 장비 성능 검증까지 가능한 시험장소로서의 활용 방안을 제시하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.497-504
• /
• 2005

This paper presents the results of experimental studies on the equipment isolation effect considering the floor response. For this purpose, shaking table tests were performed. For the measuring the floor response, numerical analysis was performed. For the isolation for the equipment, Natural Rubber Bearing(NRB), High Damping Rubber Bearing(HDRB) and Friction Pendulum System(FPS) were used. Finally, it is presented that the isolation systems used in this test can be adopted for the small equipment isolation. But the rubber bearing used in this study affected to the temperature change very sensitively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.498-503
• /
• 2000

A safety-related equipment for use in Nuclear Power Plant should be needed an Equipment Qualification. This paper presents the approach, methods, philosophies, and procedures for qualifying the large squirrel-cage induction electric pump motors for use in ULCHIN 5&6 Nuclear Power Plants. In this paper, the method of qualification is a combination of type test and analysis method, which is composed of Radiation exposure test, Seismic simulation test, Thermal aging analysis for non-metallic materials and Seismic analysis. It is found that the motor performs its safety function with no failure mechanism under postulated service conditions.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.72-77
• /
• 2007

A safety-related equipment for the nuclear power plant should be needed an equipment qualification. In this paper, the approach, methods, philosophies, and procedures for qualifying the large squirrel-cage induction electric pump motors for use in ULCHIN 5, 6 Nuclear Power Plants were presented. The method of qualification is a combination of experimental test and analytic method, which is composed of radiation exposure test, seismic simulation test, thermal aging analysis for non-metallic materials, and seismic analysis. The results showed that the motor performed its safety function with no failure mechanism under postulated service conditions.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.42-48
• /
• 2019

Since the underwater telephone was sold in a short time, there are few repair equipments. And equipment is difficult to locate fault. Equipment with transducers must be inspected underwater, and a relative naval vessels is required to perform an operational check. So we developed a tester device to test the transmission card through the spectrum and transmission power, and to develop a device that can conduct operational tests on land. Therefore, the development of the tester reduces the incidence of naval vessels and contributes to the development of domestic underwater communication test equipment.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.51-59
• /
• 2022

무기체계의 소프트웨어 기능 의존성이 높아짐에 따라 소프트웨어는 무기체계를 제어하는 핵심요인으로 자리매김하였다. 또한 국내/외적으로 소프트웨어 개발이 중요해지면서 소프트웨어에 대한 검증이 쟁점이 되고 있다. 최근 방산시장에서 이러한 점을 인식하고 무기체계 소프트웨어 유지보수를 위한 방안을 요구하고 있다. 본 논문에서는 자동화시험장비(Automatic Test Equipment, ATE)를 이용하여 무기체계 소프트웨어 유지보수 방안을 제시한다. 그 구체적인 방안은 시뮬레이터를 활용하여 소프트웨어 기능을 확인하고 고장 케이스를 식별하는 것이다. 이는 개발업체가 고장 케이스를 식별하는 시간을 줄임으로써 무기체계 총 고장정비시간(Total Corrective Maintenance Time, TCM)을 감소시킬 수 있는 효과적인 방법이다. 제안된 소프트웨어 유지보수 기능 추가된 자동화시험장비(ATE)는 기존 대비 정비도 및 운용가용도(OA)가 개선됨을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.357-359
• /
• 2003

This paper is for the transient analysis of instant short-circuit test equipment according to the test of tripping limits and characteristics under IEC 60947-2. The in-rush current is harmful to almost equipments and the exact testing is not made because of it. LGIS has a instant short-circuit test equipment, but it is not suitable for carrying out instant short-circuit test on ELB(Earth Leakage Circuit breaker) by reason of that. Now, I am going to show a solution for that problem. After applying this method, manufacturer is going to acquire the exact testing result according to the IEC standard. Moreover, Testing laboratory will be trusted by clients.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.147-154
• /
• 2005

The creep resistance of geogrids is one of the most significant long-term safety characteristics used as the reinforcement in slopes and embankments. The failure of geogrids is defined as creep strain greater than 10%. In this study, the accelerated creep tests were applied to polyester geogrids at various loading levels of 30, 50% of the yield strengths and temperatures using newly designed test equipment. Also, the new test equipment permitted the creep testing at or above glass transition temperature($T_g$) of 75, 80, $85^{\circ}C$. The time-dependent creep behaviors were observed at various temperatures and loading levels. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. The shifting factors(AFs) were obtained using WLF equation. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results confirmed that the failure distribution of geogrids followed Weibull distribution with increasing failure rate and the lifetimes of geogrids were close to 100 years which was required service life in the field with 1.75 of reduction factor of safety. Using the newly designed equipment, the creep test of geogrids was found to be highly accelerated. Furthermore, the time-temperature superposition with the newly designed test equipment was shown to be effective in predicting the lifetimes of geogrids with shorter test times and can be applied to the other geosynthetics.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• 소음진동
• /
• 제7권2호
• /
• pp.247-254
• /
• 1997

In the case of a precision equipment, it requires a vibration free environment to provide its proper function. Especially, lithography and inspection devices, which have sub-nanometer class high accuracy and resolution, have come to necessity for producing more improved giga class semiconductor wafers. This high technology equipments require very strict environmental vibration standard in proportion to the accuracy of the manufacturing, inspecting devices. The vibration criteria are usually obtained either by the real vibration exciting test on the equipment or by the analytical calculation. This paper proposes a new method to solve this problem at a time. The permissible vibration level to a precision equipment can be easily obtained by analyzing a process of Frequency Response Function. This paper also demonstrates its effectiveness by applying the proposed method to finding the vibration criteria of a Computer Hard Disk Driver by Impact Test.