• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.3
• /
• pp.192-198
• /
• 2008

Purpose: The scan time reduction helps to yield more accurate results and induce the minimization of patient's motion. Also we can expect that satisfaction of examination will increase. Nowdays medical equipment companies have developed various programs to reduce scan time. We used Onco. Flash (Pixon method, SIEMENS) that is an image processing technique gated cardiac blood pool scan and going to evaluate its clinical usefullness. Materials and Method: We analyzed the 50 patients who were examined by gated blood pool scan in nuclear medicine department of Asan Mediacal Center from June $20^{th}$ 2008 to August $14^{th}$ 2008. We acquired the Full-time (6000 Kcounts) and Half-time (3000 Kcounts) LAO image in same position. And we acquired LVEF values ten times from Full-time, Half-time images acquired by the image processing technique and analyzed its mean and standard deviation values. To estimate LVEF in same conditions, we set automatic location of the LV ROI and background ROI based on same X and Y-axis. Also we performed blinding tests to physician. Results: After making a quantitative analysis of the 50 patients EF values, each mean${\pm}$standard deviation is shown at Full-time image $68.12{\pm}7.84%$, Half- time (acquired by imaging processing technique) $68.49{\pm}8.73%$. In the 95% confidence limit, there was no statistically significant difference (p>0.05). After blinding test with a physician for making a qualitative analysis, there was no difference between Full-time image and Half-time image acquired by the image processing technique for observing LV myocardial wall motion. Conclusion: Gated cardiac blood pool scan has been reported its relatively exact EF measured results than ultrasound or CT. But gated cardiac blood pool scan takes relatively longer time than other exams and now it needs to improve time competitive power. If we adapt Half-time technique to gated cardiac blood pool scintigraphy based on this study, we expect to reduce possible artifacts and improve accessibility as well as flexibility to exam. Also we expect patient's satisfaction.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.310-320
• /
• 2014

Backgrounds: Endotoxin, which found in the outer membrane of the gram-negative bacteria cell wall, makes up almost all of the lipopolysaccharide(LPS). When people are exposed to endotoxin,it can result in diverse health effects such as an airway irritation and inflammation, fever, malaise, bronchitis, allergic asthma, toxic pneumonitis, hypersensitivity lung disease. Cases among the elderly, children or pregnant can occur more frequently than a healthy adult if they are repeatedly exposed to the existing endotoxin. Therefore, we investigated and assessed the environmental characteristics associated with the airborne endotoxin concentration level in six hospital lobbies. Method: Endotoxin from indoor air in six hospital lobbies was measured by an area sampling method and analyzed according to American Society for Testing and Materials International(ASTM international) E2144-01. Total suspended particulate(TSP), carbon dioxide($CO_2$), temperature and humidity were also measured by using direct reading measurements or airborne sampling equipment at the same time. Environmental characteristics were appropriately divided into two or three groups for a statistics analysis. One-way analysis variable(one-way ANOVA) was used to examine a difference of the endotoxin concentration, depending on the environmental characteristics. In addition, only variables with p-value(p<0.25) were eventually designed to the best model by using multiple regression analysis. Results: The correlation analysis result indicated that TSP(p=0.003) and $CO_2$(p<0.0001) levels were significantly associated with endotoxin concentration levels. In contrast, temperature(p<0.068) and humidity(p<0.365) were not associated with endotoxin concentration. Levels of endotoxin concentration were statistically different among the environmental characteristics of Service time(p=0.01), Establishment of hospital(p<0.001), Scale of hospital(p=0.01), Day average people using hospital(p=0.03), Cleaning time of lobby(p=0.05), Season(p<0.001), and Cleaning of ventilation system(p<0.001) according to ANOVA. Finally, the best model(Adjusted R-square=72%) that we designed through a multiple regression test included environmental characteristics related to Service time, Area of lobby, Season, Cleaning of ventilation system, and Temperature. Conclusions: According to this study, our result showed a normal level of endotoxin concentration in the hospital lobbies and found environmental management methods to reduce the level of endotoxin concentration to a minimum. Consequently, this study recognized to be requirement for the management of ventilation systems and an indoor temperature in order to reduce the level of endotoxin concentration in the hospital lobbies.

• Journal of the Korean Society for Library and Information Science
• /
• v.18
• /
• pp.55-98
• /
• 1990

This research attempts to verify the hypothesis that the workers in the small-and medium-sized industries use more informal information channels than formal ones do to get the information necessary to industrial activities. Information sources are divided by the internal and the external ones and these are sub-divided by their acquiring channels, publishers and holding institutions. It is intended to investigate the information sources according to the use frequency, age, origin and format of documents used. The degree of benefit to the workers in their practical work through the use of information sources and the use frequency of information sources by the department and years of experience are also investigated. The data to test the hypothesis was collected through the questionnaires distributed to the workers in 300 sampled firms from June 5 to June 20, The following facts have been verified as the result : 1. Workers in industries acquire information mainly through the contacts with the colleagues or superiors in their departments, and the junior workers depend more on the colleague and superiors than senior workers are. 2. Among the documents published internally, the ones from the research and development departments are mostly used. The documents issued by the worker's own departments are also frequently used and the senior workers, the more frequently use the internal publications than the junior workers do. 3. Among the internal documents stored in various places in the industries, the documents kept in the worker's own departments are used most frequently. The senior workers the more use privately owned documents than the junior workers do. 4. As far as the external channels are concerned, information is obtained mainly through suppliers of equipment and raw materials and the use frequency of information channels varies according to department. The senior workers the more receive information through supporting institution, seminar and exhibition than the junior workers do. 5. Among the external publication, the ones published by the industrial supporting institutions are heavily used and the workers in research and developments frequently use the external publications. 6. The documents held in governmental industrial institutions and industrial supporting institutions are heavily used compared with the ones stored in other external institutions. The holding places of frequently used documents vary according to the working departments. 7. The degree of benefit to practical work performance resulted from the internal information use is less than by the use of external information. 8. The documents published more than five years ago are more used than the ones of less than five years, Korean and Japanese documents are used frequently and catalogues, patents and standards are used to a great extent. The documents are used differently in accordance with work departments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.265-271
• /
• 2010

This paper discusses a new software package, DEM_Comp, developed for effectively compressing large digital elevation model (DEM) data sets based on Lempel-Ziv-Welch (LZW) compression and Huffman coding. DEM_Comp was developed using the $C^{++}$ language running on a Windows-series operating system. DEM_Comp was also tested on various test sites with different territorial attributes, and the results were evaluated. Recently, a high-resolution version of the DEM has been obtained using new equipment and the related technologies of LiDAR (LIght Detection And Radar) and SAR (Synthetic Aperture Radar). DEM compression is useful because it helps reduce the disk space or transmission bandwidth. Generally, data compression is divided into two processes: i) analyzing the relationships in the data and ii) deciding on the compression and storage methods. DEM_Comp was developed using a three-step compression algorithm applying a DEM with a regular grid, Lempel-Ziv compression, and Huffman coding. When pre-processing alone was used on high- and low-relief terrain, the efficiency was approximately 83%, but after completing all three steps of the algorithm, this increased to 97%. Compared with general commercial compression software, these results show approximately 14% better performance. DEM_Comp as developed in this research features a more efficient way of distributing, storing, and managing large high-resolution DEMs.

• Journal of Home Health Care Nursing
• /
• v.7 no.1
• /
• pp.5-14
• /
• 2000

This study was conducted during the time period of September 1997 to February 1999. in order to provide data concerning important facets of horne care nursing and the degree to which practicing hospital and public health nurses believe themselves to be competent in each area. The study subjects consisted of 610 hospital nurses, 158 public health nurses and 21 other nurses from Seoul and the province of Kyunggi. Korea. Data was collected through self-reporting questionnaires which was used by Kim et al.(1999) to evaluate the status of home health nursing and the varying ideas of self-competence that practicing nurses have. The results of the study were as follows: 1) The mean scores of perceived important components and competencies on home health nursing measured on the Likert 4 point scale were $3.15{\pm}0.36$ for importance. and $2.56{\pm}0.36$ for competency. Of the four categories regarding nursing services, the 'Nursing skill' factor had the highest importance and competency. 2) There were significantly higher scores for hospital nurses' importance components and competencies of home care nursing as compared to those scores for public health nurses. 3) The significant factors of the importance component of home care nursing listed in order of priority were 'general infection control', 'bed sore care skill', 'rehabilitation care', 'keeping maintenance of the client's confidentiality', 'malpractice', 'diabetes patient care', 'ability for problem solving' respectively. In contrast, of low priority in the importance components of home care nursing were 'referring nursing as a job to others'. 'record keeping', 'family dynamics', 'medical equipment', 'economic problems', 'environmental assessment', 'suture removal', 'multidisciplinary coordination' respectively. 4) The high priority of the degree to which practicing nurses believe themselves to be competent in home health nursing were the 'blood sugar test', 'enema skill', 'injection skill', 'skin care', 'bed sore care skill', etc. In contrast, lower competence for home care nursing as perceived by nurses were 'AIDS care', 'family violence care', 'substance abuse care', 'mental health care' respectively.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.214-218
• /
• 2014

We introduce a technical equipment of GATe (Green (algae)-tide) water combine developed by K-water. The GATe water combine consists of five modules: main body and buoyant, transfer hopper, screen conveyer, sludge remover, and separator of algae and waste. Also a sprinkler, as the pre-treatment step if necessary, is equipped to the device to spread out environmental-friendly algaecide under the circumstance that the level of algal bloom does not reach to the scum-forming condition. The overall module system of this device is very simple. Based on the field test, the device covers surface area of ca. $500,000m^2day^{-1}$ during the period from May to July, and treats water volume as much as $500,000m^3day^{-1}$ in spite of some variation depending on the water quality condition. The removal efficiency of the device appeared to be over 90%. In addition, the operating duration of the device was able to expand to cover the period between March and November. We expect this new technology can be used to solve algal bloom problems in drinking water resource and public water area.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.23-32
• /
• 2015

This study examined blast testing measurement data which had been obtained from 97 field sites in Korea to investigate the comprehensive characteristics of rock blasting-induced vibration focusing on the effect of excavation types (tunnel, bench) and rock types. The measurement data was from the testing sites mostly in Kangwon province and Kyungsang province and rock types were granite, gneiss, limestone, sand stone, and shale in the order of number of data. The study indicated that the blasting-induced vibration velocity was affected by the excavation types (tunnel, bench) and bench blasting induced higher velocity than tunnel blasting. In addition, the vibration velocity was also highly affected by the rock types and therefore, it can be concluded that rock types should be considered in the future to estimate a blasting-induced vibration velocity. Furthermore, the pre-existing criteria was compared with the results of this study and the comparison indicated that there was a discernable difference except for tunnel blasting results based on the square root scaling and therefore, further studies and interests, which include the effects of rock strength, joint characteristics, geological formation, excavation type, power type, measurement equipment and method, might be necessarily in relation to the estimation of blasting-induced vibration velocity in rock mass.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.48-57
• /
• 1995

The purpose of this study was to assess the performance of the role and function of some industrial nurses and to characterize the factors affecting the performance of their activities. Thus the results could be used to suggest the direction in the performance of industrials nurses' activities effectively. During a period from January 10 to March 31, 1994, the data were collected from 87 industrial nurses, who were working as health managers in the plants, in Ulsan city and the vicinity in Kyungnam province, using a structured questionnaire. The results were as follows : 1. The general characteristics of industrial nurses in this study were 82.8% being 30 years old or less, 60.9%, being not married, and 93.1% having eduction levels above junior college. 2. With respect to general work conditions, 94.3% were working in a separate room provided for health care division, 40.2% working under the safety and health department, and 98.9% working as common-level staffs. And 60.9% were working less than 44 hours a week, 70.1% had work experiences less than 5 years, and 50.6% had annual incomes ranging 10 to 14 million wons. 3. As work conditions related to health care activities, 49.4% performed the activities not related to health care as always or occasionally, and 87.4% answered that occupational physicians were appointed in their plant and among them, however, only 6.9% worked on full-time basis and 52.8% perform little activities as occupational physicians. For a decision related to health care activity, 69.0% discussed the problems with the supervisors, and 19.5% made decisions by themselves. 4. As for attitude and perception to their activities as health managers, 66.7% moderately recognized the importance of health manager in the workplace, with 63.2% being satisfied their wages and treatment from the company, 57.5% being satisfied with their job positions and 51.7% having positive attitudes as being health managers. 5. The degree of performance at least in one of health related activities were very high in activities such as general medical care(100%), general health examination(98.0%) and specific health examination(100%), and relatively high in health education(72%), new employee health examination(60.9%), document handling(79.3%) and activity for work environment(70.1%). However, the performance rate was very low in preparing protective equipment (20.8%). 6. The levels of activities related to health care were significantly high when making decisions by themselves, when occupational physicians not being full-time, and when satisfying their job positions, and, on the other hand, significantly decreased as work hours increased. 7. In addition to some kinds of periodic education asked by all of the nurses, 89.7% wanted a specialized licensing system for industrial nurse, and 97.4% wanted to apply for the license test. As a conclusion, it is suggested that industrial nurses should be given more authority and placed in more self-controlled system to perform health care and other activities more efficiently, and the role and function of the occupational physician should be clearly distinguished from that of the industrial nurse as a health manager to avoid an unnecessary overlapping.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2016

This study attempts to establish a precise forecast model for the container inventory demand of shipping companies through forecasts based on equipment type/size, ports, and weekly system dynamics. The forecast subjects were Shanghai and Yantian Ports. Only dry containers (20, 40) and high cubes (40) were used as the subject container inventory in this study due to their large demand and valid data computation. The simulation period was from 2011 to 2017 and weekly data were used, applying the actual data frequency among shipping companies. The results of the model accuracy test obtained through an application of Mean Absolute Percentage Error (MAPE) verified that the forecast model for dry 40' demand, dry 40' high cube demand, dry 20' supply, dry 40' supply, and dry 40' high cube supply in Shanghai Port provided an accurate prediction, with $0%{\leq}MAPE{\leq}10%$. The forecast model for supply and demand in Shanghai Port was otherwise verified to have relatively high prediction power, with $10%{\leq}MAPE{\leq}20%$. The forecast model for dry 40' high cube demand and dry 20' supply in Yantian Port was accurate, with $0%{\leq}MAPE{\leq}10%$. The forecast model for supply and demand in Yantian Port was generally verified to have relatively high prediction power, with $10%{\leq}MAPE{\leq}20%$. The forecast model in this study also had relatively high accuracy when compared with the actueal data managed in shipping companies.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.19-23
• /
• 2007

The NiSi is very promising candidate for the metallization in 45 nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25\;{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5\;{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process temperature window for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5\;{\Omega}/{\square}$ and $3\;{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.