• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.34-45
• /
• 2001

We have needs to develop a performance analysis system that can be used in domestic nuclear power plants to determine performance status of turbine cycle. We developed new NOPAS system to aid performance analysis of turbine cycle . Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on ASME (American Society of Mechanical Engineers) PTC (Performance Test Code). Robustness in the performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful aids for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis reports.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.7
• /
• pp.529-536
• /
• 2007

The perforated type element for a heat recovery ventilation system has been studied to improve the performance. Four holes of diameter of 6mm are punched out for each flow channel to break the boundary layer development and increase the turbulence. KS cooling and heating conditions and test procedures are applied for study. The efficiencies are compared to those of the typical element with smooth surface. For cooling operations, the temperature, latent and enthalpy efficiencies increase 2.5%, 18% and 8%, respectively. For heating operations, the temperature, latent and enthalpy efficiencies increase 3%, 5% and 3.2%, respectively.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.265-272
• /
• 2003

The computer program for the accelerated life testing technique of a machine part under the service conditions is developed under the GUI environment so that the user can easily obtain the results by selecting the program module. Also, the theoretical backgrounds for the computer program and the procedures of the accelerated testing method are introduced by testing the specimens made of the stainless steel 316L under the high temperature and random loading. The reliability of the program is discussed by the experimental results of the fatigue life, age degradation and accelerated testing conditions.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2230-2235
• /
• 2008

As a consequence of the standardization process developing in Europe, on April 2005 the new European standard EN 13749 was issued by the European standardization body CEN. The norm EN 13749 standardizes and develops the requirements already present in UIC leaflets for test verifications and define all technical requirements for the acceptance process in order to achieve a complete satisfactory design of the bogie. The aim of the norm is to define the complete design process of new railway bogies. It includes design procedures, assessment methods, verification and manufacturing quality requirements. In this study, fatigue analysis of the bogie frame is investigated comparing different approaches between conventional methodology and simulation results based on the VPD(Virtual Product Development).

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.61-67
• /
• 1994

The objective of this numerical analysis is to trace the hysteretic behavior of steel angles under very-low-cycle loading test, especially the history and cumulative state of local stress-strain at their critical parts. The computer model is based on a three-dimensional, non-linear analysis by using the finite element program, MSC/NASTRAN, which includes the effects of the material and geometric non-linearities. The analysis was performed as two stage procedures, namely Analysis I and II. The overall behavior from this analysis showed good agreement with the experiment.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.3
• /
• pp.16-21
• /
• 2016

As motorcycles are getting more widely used recently, motorcycle accidents are gradually increased every year. Although most accidents are caused by human factors, the importance of motor vehicle safety standards cannot be underestimated indeed. A variety of regulations related to motorcycle safety have been issued in many countries such as EU, U.S., and Australia, etc. In order to harmonize the international safety standards, it is necessary to develop or enhance the Korean Motor Vehicle Safety Standards (KMVSS) for motorcycles. In this study, motorcycle safety standards for an exterior rear-view mirror and a tire are investigated. Actual test procedures are expected in sequential studies according to the results provided herein. Also, the findings in this paper can be utilized to ensure the KMVSS for a safer driving.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.51-55
• /
• 2004

In the design stage of high precision manufacturing/inspection FAB facilities, it is necessary to investigate the allowable vibration limits of high precision equipments and to study structural dynamic characteristics of C/R and Sub-structure in order to provide structural vibration criteria to satisfy these allowable limits. The goal of this study is to investigate the dynamic characteristics of PC-Type mock-up structures designed for next generation TFT-LCD FAB through experiments and analysis procedures. Therefore, in order to provide a proper dynamic structural design for high precision manufacturing/inspection work process, these allowable limits must be satisfied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.409-416
• /
• 2005

We need to develop a on-line thermal performance analysis system for nuclear power plant to determine performance status and heat rate of turbine cycle. We have developed PERUPS(PERformance Upgrade System) to aid the effective performance analysis of turbine cycle. Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on PTC(Performance Test Code). Robustness in the on-line performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful web interfaces for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis report. The system was successfully applied for YongGwang nuclear plant unit #3,4.

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.259-269
• /
• 1993

For efficient use of composite materials in engineering applications the dynamic behavior, that is, natural frequencies, nodal patterns should be informed. This study presents the experimental and FEM results for the free vibration of cantilevered, symmetrically and antisymmetrically laminated composite triangular plates. The natural frequencies and nodal patterns of a number of CFRP, GFRP, composite-Aluminum and CFRP-GFRP hybrid composite plates are experimentally obtained. A method for the determination of the Young's modulus and test procedures are described. The natural frequencies are determined for a wide range of parameters: e.g., composite material constants, fiber angles and stacking sequences. Natural frequency and nondimensional frequency parameter results are compared with the finite element analysis and existing literatures. Agreement between experimental and calculated frequencies is excellent.