• Title/Summary/Keyword: Test Validation

Search Result 1,781, Processing Time 0.026 seconds

Validation of COMS Ka band Antenna Beam Coverage (천리안위성 Ka대역 안테나 빔 커버리지 검증)

  • Jo, Jin-Ho;You, Moon-Hee;Lee, Seong-Pal;Kim, Jae-Hoon
    • Journal of Satellite, Information and Communications
    • /
    • v.7 no.1
    • /
    • pp.86-91
    • /
    • 2012
  • This paper described validation results of COMS Ka band antennas beam coverages which were developed by ETRI. After satellite launch, In Orbit Test(IOT) activities are stat to check spacecraft and payloads are still in healthy condition after launch. During IOT phase, ETRI measured radiation patterns of COMS Ka band antennas and compare with ground test(CATR) results. The antenna patterns similarity between IOT results and CATR results show that COMS Ka band antenna withstand launch vibration and in the good healthy condition. After IOT, ETRI performed field test for beam coverage measurements with vehicle to check if Ka band beam coverage are formed well as designed. For the beam coverage measurement, 17 points were selected over the Korean peninsula. The field measurement data were very similar with CATR data and this confirms that beam coverage are formed well over the Korean peninsula as expected.

A Study on Hydraulic Drawdown Test Model and Experimental Estimation of Desorption Rate Ratios of Fuel Filters (유압 저하시험 모델과 자동차 연료필터의 토설율 측정 실험 연구)

  • 이재천;계중읍
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.20 no.9
    • /
    • pp.205-213
    • /
    • 2003
  • This study describes the mathematical equation of drawdown test model and introduces the experimental test apparatus and procedure to estimate the desorption rate ratio of a filter. The characteristics of a hydraulic filtration system of drawdown test were demonstrated by numerical simulation for various properties of filters and operation conditions. Experiments for three kinds of fuel filters were conducted according to the proposed test method. And the test results of desorption rate ratio were compared with those values anticipated in precedent multipass filtration tests. Experimental results revealed the validation of drawdown test method proposed in this study. Domestic fuel filter yielded high desorption rate ratio comparing with other foreign products, which means that the Beta ratio decreases a lot during the test. The results also showed that filtration system model could be developed including desorption rate ratio to estimate the variable Beta ratio in service life.

A Study on the Software Test Case Development using Systems Engineering Methodology (시스템엔지니어링 방법론을 적용한 소프트웨어 테스트 케이스 개발에 관한 연구)

  • Salim, Shelly;Shin, Junguk;Kim, Jinil
    • Journal of the Korean Society of Systems Engineering
    • /
    • v.14 no.2
    • /
    • pp.83-88
    • /
    • 2018
  • Software has become an integral part of almost any system, triggered by the ever-growing demand for automation and artificial intelligent throughout engineering domains. The complexities of software-centric systems are also increasing, which make software test efforts become essential in software development projects. In this study, we applied systems engineering methodology in generating software test cases. We found out the similarities between requirements analysis and traceability concept of systems engineering and test specification contents of software test. In terms of acceptance test, software test cases could be considered as validation requirements. We also suggested a method to determine test order using a SysML modeling tool.

Incremental Model-based Test Suite Reduction with Formal Concept Analysis

  • Ng, Pin;Fung, Richard Y.K.;Kong, Ray W.M.
    • Journal of Information Processing Systems
    • /
    • v.6 no.2
    • /
    • pp.197-208
    • /
    • 2010
  • Test scenarios can be derived based on some system models for requirements validation purposes. Model-based test suite reduction aims to provide a smaller set of test scenarios which can preserve the original test coverage with respect to some testing criteria. We are proposing to apply Formal Concept Analysis (FCA) in analyzing the association between a set of test scenarios and a set of transitions specified in a state machine model. By utilizing the properties of concept lattice, we are able to determine incrementally a minimal set of test scenarios with adequate test coverage.

Validation study of the Dinamap ProCare 200 upper arm blood pressure monitor in children and adolescents

  • Lee, Chong-Guk;Park, Hyang-Mi;Shin, Hye-Jung;Moon, Jin-Soo;Hong, Young-Mi;Kim, Nam-Soo;Ha, Il-Soo;Chang, Myeong-Jin;Oh, Kyeong-Won
    • Clinical and Experimental Pediatrics
    • /
    • v.54 no.11
    • /
    • pp.463-469
    • /
    • 2011
  • Purpose: To validate the Dinamap ProCare 200 blood pressure (BP) monitor against a mercury sphygmomanometer in children 7 to 18 years old in accordance with the 2010 International Protocol of European Society of Hypertension (ESH-IP2) and the British Hypertension Society (BHS) protocol. Methods: Forty-five children were recruited for the study. A validation procedure was performed following the protocol based on the ESH-IP2 and BHS protocols for children and adolescents. Each subject underwent 7 sequential BP measurements alternatively with a mercury sphygmomanometer and the test device by trained nurses. The results were analyzed according to the validation criteria of ESH-IP2. Results: The mean (${\pm}SD$) difference in the absolute BP values between test device and mercury sphygmomanometer readings was $1.85{\pm}1.65$ mmHg for systolic BP (SBP) and $4.41{\pm}3.53$ mmHg for diastolic BP (DBP). These results fulfilled the Association for the Advancement of Medical Instrumentation criterion of a mean${\pm}$SD below $5{\pm}8$ mmHg for both SBP and DBP. The percentages of test device-observer mercury sphygmomanometer BP differences within 5, 10, and 15 mmHg were 96%, 100%, and 100% for SBP, and 69%, 92%, and 100% for DBP, respectively, in the part 1 analysis; both SBP and DBP passed the part 1 criteria. In the part 2 analysis, SBP passed the criteria but DBP failed. Conclusion: Although the Dinamap ProCare 200 BP monitor failed an adapted ESH-IP2, SBP passed. When comparing BP readings measured by oscillometers and mercury sphygmomanometers, one has to consider the differences between them, particularly in DBP, because DBP can be underestimated.

A Validation Study of Retrospective Pre-post Testin the Affective Domain in Science Learning:for Scientifically Gifted Elementary Students (과학학습의 정의적 영역에서 사전-사후 통합 검사 설계의 타당화 연구: 과학영재를 대상으로)

  • Lim, Chae-Seong;Park, Hyoung-Min
    • Journal of Korean Elementary Science Education
    • /
    • v.36 no.3
    • /
    • pp.219-226
    • /
    • 2017
  • In this study, the reliability and validity of the retrospective pre-post test were analyzed in order to solve the problem of traditional pre-post test including response shift bias. Samples of the study were 162 elementary school students who are studying at the S university gifted education center in Seoul. Before completion of the field trip, we conducted pre test of science-related attitudes. After completion of the field trip, respondents were asked to compare their responses of pre and post science-related attitudes to quantitatively analyze the commonalities and differences of the two tests. To find out more characteristics, qualitative data such as daily records and interview were also gathered and analyzed. The major results of the study are as follows. First, for the paired t-test, there was no statistically significant difference between separate pre-test scores and retrospective pre-test. There was a very high correlation between the separate pre-test scores and the retrospective pre-test. Second, there were significant differences in all seven sub-factors of science-related attitudes between the retrospective pre-test and the post-test. Third, the separate pre-test scores showed a slightly higher tendency than the retrospective pre-test scores. This suggests that the response shift bias appears when it is performed the separate pre-test in affective domain. As a result of the interview, it was found that the evaluation standards of separate pre-test did not match with those of post-test. Forth, internal consistency reliability of the retrospective pre-test was higher than that of the separate pre-test. However, there were significant differences in six factors of science-related attitudes excluding the 'social implications of science' between the separate pre-test and the post-test. Based on these results, the retrospective pre-post test design provides simplicity and convenience to both respondents and investigators, as it is done with one test. The retrospective pre-post test design can be regarded as a valid design for the self-report measurement of affective domain on a single experimental group.

Development and Validation of the Measurement Tool of Public Benefits in Regional Cardiocerebrovascular Center (권역심뇌혈관질환센터의 공익성 측정도구 개발)

  • Lee, Kunsei;Shin, Eunyoung;Jeong, Hyoseon;Lee, Jung-Hyun;Kim, Hee-Sook;Lim, Young Sil;Kim, Young Taek
    • Health Policy and Management
    • /
    • v.23 no.4
    • /
    • pp.434-444
    • /
    • 2013
  • Background: Regional Cardiocerebrovascular Centers (RCC) were established for the prevention and treatment of cardiocerebrovascular disease and funded by the Ministry of Health and Welfare. The purpose of this study was to develop and validate the measurement tool of public benefits in RCC. Methods: Through the intensive literature review, experts surveys and their repetitive feedback, we selected the 46 items about the public benefits in RCC. Development of measurement tool involved content validity test using Content Validity Index (CVI), construct validity test through factor analysis and reliability test. Results: Thirty-five items were selected by content validity test, which CVI was 0.08 or higher. Through the construct validity test, 32 items in 7 factors were derived. And Cronbach's alpha was 0.951. Finally, public benefits measurement tool is composed of 32 items in 7 factors which are comprehensiveness of health care services, market complement, emergency care, cost, governance, quality improvement, and government control. Conclusion: Though we developed the measurement tool of public benefits in RCC, it would be utilized to measure the public benefits of various health agencies.

Pooled Analysis of the Cow's Milk-related-Symptom-Score (CoMiSSTM) as a Predictor for Cow's Milk Related Symptoms

  • Vandenplas, Yvan;Steenhout, Philippe;Jarvi, Anette;Garreau, Anne-Sophie;Mukherjee, Rajat
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • v.20 no.1
    • /
    • pp.22-26
    • /
    • 2017
  • Purpose: The diagnosis of cow's milk (CM) allergy is a challenge. The Cow's Milk-related-Symptom-Score ($CoMiSS^{TM}$) was developed to offer primary health care providers a reliable diagnostic tool for CM related symptoms. The predictive prospective value of the $CoMiSS^{TM}$ was evaluated in three clinical trials. Methods: Pooled analyses of the three studies were conducted based on regressing the results of the month-1 challenge test on the month-1 $CoMiSS^{TM}$, adjusting for baseline $CoMiSS^{TM}$ using a logistic regression model. In addition a logistic regression model was also fitted to the month-1 challenge test result with the change in $CoMiSS^{TM}$ from baseline as a predictor. Results: Results suggest that infants having a low $CoMiSS^{TM}$ (median, 5) after 1 month dietary treatment free from intact CM protein have a significant risk of having a positive challenge test (odds ratio, 0.83; 95% confidence interval, 0.75-0.93; p=0.002). Pooled data suggest that the change in $CoMiSS^{TM}$ from baseline to month-1 can predict CM related symptoms as a confirmed diagnosis according to the challenge test at month-1. However, in order to validate such a tool, infants without CM related symptoms would also need to be enrolled in a validation trial. A concern is that it may not be ethical to expose healthy infants to a therapeutic formula and a challenge test. Conclusion: Pooled data analysis emphasizes that the $CoMiSS^{TM}$ has the potential to be of interest in infants suspected to have CM-related-symptoms. A prospective validation trial is needed.

Validity and Reliability of an Instrument for Predictive Nursing Intention for SARS Patient Care (SARS 환자간호 의도예측 도구의 타당도 및 신뢰도 검증 연구)

  • Yoo, Hye Ra;Kwon, Bo Eun;Jang, Yon Soo;Youn, Heun Keung
    • Journal of Korean Academy of Nursing
    • /
    • v.35 no.6
    • /
    • pp.1063-1071
    • /
    • 2005
  • Purpose: This study was done to develop and test validity and reliability of on instrument for predicting nursing intention for SARS patient care. Method: The psychometric properties of a SARS patient care attrition prediction tool, based on the Theory of Planned Behavior, were examined in this study. The Three-phase design involved a) salient beliefs generated from clinical nurses (n=43) b) content validation by expert panel evaluations(n=5) c) face validation by plot testing (n=10) d) and instrument validation in a cross sectional survey (n=299). Psychometric analysis of survey data provided empirical evidence of the construct validity and reliability of the instrument. Result: Principal component analysis verified the hypothesized 6-factor solution, explaining $68.2\%$ of variance, and Alpha coefficients of .7538 to .9389 indicated a high internal consistency of the instrument. Conclusion: The instrument can be used by nurse administrators and researcher to assess clinical nurses' salient beliefs about caring for SARS patients, guide tailored intervention strategies to effective caring, and evaluate the effectiveness of interventions.

Nonparametric homogeneity tests of two distributions for credit rating model validation (신용평가모형에서 두 분포함수의 동일성 검정을 위한 비모수적인 검정방법)

  • Hong, Chong-Sun;Kim, Ji-Hoon
    • Journal of the Korean Data and Information Science Society
    • /
    • v.20 no.2
    • /
    • pp.261-272
    • /
    • 2009
  • Kolmogorov-Smirnov (K-S) statistic has been widely used for testing homogeneity of two distributions in the credit rating models. Joseph (2005) used K-S statistic to obtain validation criteria which is most well-known. There are other homogeneity test statistics such as the Cramer-von Mises, Anderson-Darling, and Watson statistics. In this paper, these statistics are introduced and applied to obtain criterion of these statistics by extending Joseph (2005)'s work. Another set of alternative criterion is suggested according to various sample sizes, type a error rates, and the ratios of bads and goods by using the simulated data under the similar situation as real credit rating data. We compare and explore among Joseph's criteria and two sets of the proposed criterion and discuss their applications.

  • PDF