• Journal of Korean Society for Quality Management
• /
• 제46권3호
• /
• pp.379-396
• /
• 2018

Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.

• Korean Journal of Cleft Lip And Palate
• /
• 제5권1호
• /
• pp.1-9
• /
• 2002

Some children with Cleft Palate have shown a speech disorders after repaired surgical operation. A diagnostic evaluation of speech in children with cleft palates is important in preventing speech disorders. However, standard speech evaluation form for children with cleft palates has not yet developed in Korea. The purpose of this study is to make the standard speech evaluation form for children with cleft palates. Thirty control children group and ten children with cleft palate participated in this experiment. The test words are composed of meaningless two syllabic words containing the three different types of korean stop consonants,

• Industrial Engineering and Management Systems
• /
• 제14권1호
• /
• pp.11-21
• /
• 2015

The purpose of this research is to develop algorithms using the Differential Evolution Algorithm (DE) to solve a multi-objective, sources and stages location-allocation problem. The development process starts from the design of a standard DE, then modifies the recombination process of the DE in order improve the efficiency of the standard DE. The modified algorithm is called modified DE. The proposed algorithms have been tested with one real case study (large size problem) and 2 randomly selected data sets (small and medium size problems). The computational results show that the modified DE gives better solutions and uses less computational time than the standard DE. The proposed heuristics can find solutions 0 to 3.56% different from the optimal solution in small test instances, while differences are 1.4-3.5% higher than that of the lower bound generated by optimization software in medium and large test instances, while using more than 99% less computational time than the optimization software.

• Journal of Advanced Navigation Technology
• /
• 제7권2호
• /
• pp.206-210
• /
• 2003

In this paper, we design standard cell libraries using the 0.18um deep submircom CMOS process, and port them into a P&R (Placement and Routing) CAD tool. A simple test chip has been designed in order to verify the functionalities of the 0.18um standard cell libraries whose technical process was provided by Anam semiconductor. Through these experiments, we have found that the new 0.18um CMOS process can be successfully applied to automatic digital system design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.67-68
• /
• 2010

The bond stress and crack spacing are effected the calculated crackwidth. EC2 and MC90 suggest crackwidth function that maximum crack spacing and difference average strain. This study is predict crackwidth, according to each design standard than comprison and analyis test data. The result, each design standard ways are predict well to test data.

• Journal of the Korean Society for Railway
• /
• 제3권3호
• /
• pp.170-176
• /
• 2000

Nowadays, the vehicle structure weight of urban transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the standard EMU power car is evaluated to the static and fatigue strength. And, the evaluation method is used the JIS E4207 specification throughout the FEM analysis and static load test. The static and fatigue test results for the standard EMU bogie frame of power car has been appeared very safety and stable for the design load conditions.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.483-488
• /
• 2001

Until now, the tensile properties of materials can be obtained just in accordance with conventional tensile testing methods which are described in several standards such as ASTM (American Society for Testing and Materials) standard and BS (British Standard). For some cases including on-service facility materials, however, the standard testing methods cannot be applicable due to the destructive testing procedure and specimen size requirement. Therefore, simple, non-destructive and advanced indentation technique was proposed. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. In this paper, the research trend of non-destructive evaluation of tensile properties using AIS (advanced indentation system) and its application fields are reviewed and discussed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.295-296
• /
• 2011

The DRM+ is the newest digital radio standard for in-band environment. Although various state of the art technologies are adopted, the performance evaluation information is not sufficient. It is hard that many countries and stations considering the DRM+ as their digital radio standard check the performance of DRM+. To evaluate the performance of the DRM+ system, this paper depicts the laboratory trial results of DRM+ standard. In the laboratory trial, the rack type DRM+ test bed is built. To reflect the practical broadcasting environment, various tests are executed. Many countries and stations can efficiently use these test results, which are considering converting their analog radio broadcasting to digital broadcasting.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.467-469
• /
• 2003

IEC(International Electrotechnical Commission) 62271-100 has been adopted for the design test of circuit breaker which is used as the main protecting device of power system. But, it is also necessary to separately receive the testing certificate in accordance with ANSI/IEEE standard for getting into the american market. Up to now, several domestic companies have completed the ANSI/IEEE testing in medium circuit breaker of distribution system, but they recently started the ANSI/IEEE testing in ultra high-voltage class of transmission and substation system. This paper introduces the testing techniques and its results for the making and breaking performance of 145kV, 40kA $SF_6$ gas circuit breaker which was firstly performed in KERI(Korea Electrotechnology Institute) by the ANSI/IEEE standard.

• Journal of the Korea Safety Management & Science
• /
• 제17권2호
• /
• pp.161-175
• /
• 2015

This study analyzed that the infant carrier standard affects the satisfaction of certification. Baby Carrier Safety requirements in the Republic of Korea is enforceable by court duty certification. Therefore, a test was conducted to compare with the safety requirements of the United States and Europe and the survey was conducted to know how much manufacturers and importers are satisfied with the certification. According to the test result, there is a difference between domestic and foreign safety requirements about flame retardancy. As a result of the survey, The satisfaction of the certification is proportionate to the one of product standard.