• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.744-751
• /
• 2006

In case of the Soil Nail System applied to a slope, effects of vibrations from blasting, earthquake and creep of long term behaviors cause reductions of adhesion between grout and soil-nail. There are some reports of nail's pull-out failure by those reasons. In this paper it is suggested that the Cone Nailing System is enable to diminish effects of vibrations and creep. In this study on Cone Nailing System, the cones are installed to each nail by 2m. By such installing cones, the adhesion between nail and grout will increase and the long term creep behavior will decrease. In this study, the centrifuge test is performed to understand the behaviors of the Cone Nail System. For the centrifuge test, the soil tank is 52cm in width, 17cm in length and 35cm in height. In comparison with general soil nail, the centrifuge test of general soil nail(without cone) is performed equally. Additionally, the interface between cone nail and soil through the pull-out test is applied to FLAC 2D version 3.3. and the evaluation of application for the Cone Nail System in slope is performed.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.771-779
• /
• 2008

The purpose of the study was assessing Kochujang sauces(BBQ & Chicken) using a Home Use Test(HUT) focused on England food consumer. To achieve of the purpose, 58 England food consumers were selected by CCFRA's customer database. The qualification of the sample was responsible for the households' main grocery shopping, cooking Oriental/ Far Eastern cuisines at home, enjoying hot/spicy chilli based food and would be willing to buy hot chilli based Oriental sauce. 3 times of HUT were accomplished. The test was continued during 3 weeks, and each test was continued during one week. To check the sensory evaluation results on these sauces, 9 point hedonic scale and JAR(Just About Right) were used. The frequency analysis was adopted for the study. The results of a study were as followed. The overall satisfaction(upper 7point) on BBQ sauce was 60%, and the chicken sauce was 55.1%. The sweetness, hot taste, and BBQ aroma were suitable as a upper 40% using JAR scale. On purchase intention, BBQ & Chicken was slightly increased. These sauces were proper lunch & Dinner time. Also, good for dip, stir fry, and marinade. The result of put to use the sauces on food material as followed. BBQ sauce was proper Chicken(45.5%), vegetable(29.9%), and turkey(19%) in the order named. In case of the chicken sauce was ordered chicken(46.2%), vegetable(27.5%), beef(17.5%).

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.25-32
• /
• 2018

Due to the rapid increase in the number of vehicles, the physical and human losses caused by traffic accidents have become serious social problems. In the global trend, there have been active studies conducted on improving safety level of automobile in order to reduce the number of automobile accident. As a result of such research, traffic accidents continue to decline. In the case of South Korea, however, rate of death by automobile accident is 8.5 per 10,000 people and it is a seven rank among the countries in OECD (Organization for Economic Cooperation and Development). This average rate is almost double compared to average automobile accident rate per 10,000 vehicles, of other OECD countries in 2015. Consequently, many studies and policies currently have been conducted and made for increasing safety of pedestrians; however, they are only emphasizing characteristics of pedestrians and drivers. For this reason, this study suggests scenarios for establishment of test standard corresponding with domestic environment and international standard of AEB (Autonomous Emergency Braking) and conducts a real car test by scenarios by setting up a goal with a function for remaining distance after braking and then examine equation by comparing real car tests results and outcome after calculation. This is a theoretical method to predict a relative remaining distance after AEB prior to conducting a real car test for evaluation of safeness of automobile with AEB and it is expected that it solves problem of complication of real car test.

• Journal of Korean Medicine Rehabilitation
• /
• v.34 no.3
• /
• pp.89-96
• /
• 2024

Objectives This study is designed to evaluated the safety of peony root extract tablet in healthy male volunteers. Methods 12 healthy male volunteers were recruited, and this study was conducted by a single center. The safety was evaluated by collecting laboratory test and vital signs of volunteers. As the registration process, 12 subjects were assigned by serial number. To evaluate safety, vital signs were checked and blood samples were collected 4 times during the screening period, pre & post-administration (after 8 hours) and post-administration (after 7 days). The difference in variables was summarized by the mean±standard deviation. The normality test was carried out using the Shapiro-Wilk test and Kolmogorov-Smirnov test. When normality is fulfilled, a paired t-test is applied and the significance level was p<0.05. And the incidence of all adverse effects and serious adverse effects are shown in percentage. Results In the case of vital sign, body temperature (BT) (℃) was 0.06±0.05 ℃ (p=0.008), and there was a statistically significant difference in before and after administration. However, clinical symptoms were not occurred and BT (℃) of all subjects before and after administration showed values within the normal reference value. There was no significant difference from the control group in all other vital signs and laboratory test data. And no side-effects associated to clinical trial drugs were followed. Conclusions The peony root extract tablet was considered to be safe for healthy male volunteers.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.675-681
• /
• 2021

Recently, the Ministry of Education stipulates in the distance class operation regulations that student lecture evaluations for distance learning subjects should be conducted at least twice per semester and the results should be disclosed to students. Therefore, the lecture evaluation of D college was compared with the first semester of 2020 and the first semester of 2021. As for the multiple-choice evaluation result of the distance learning mid-course evaluation, the overall average of the mid-course evaluation of the distance class in the first semester of 2020 increased from 4.1819 to 4.4000 in the mid-course evaluation in the first semester of 2021.In the case of the first semester of 2020, due to Corona 19, all non-face-to-face classes were held, but in the first semester of 2021, face-to-face classes increased. The overall satisfaction level rose from 4.18 points in the first semester of 2020 to 4.39 points in the first semester of 2021. The screen composition, sound and picture quality, playback time, face appearance, lecture material provision, and frequency of use of the top 3% and bottom 3% also increased. Despite the changes caused by the LMS replacement, which was a concern, student attendance, assignments, and test submission rates also increased compared to the previous year. The null hypothesis that 'the difference between the two scores is the same' is the null hypothesis because the probability of significance is 0.000 and less than 0.05 in the case of the best 3% of the test result of the test result of the mid-course evaluation of distance classes in the first semester of 2020 and the evaluation of the intermediate lectures in the first semester of 2021. As this was rejected, it can be seen that the best score for the 2021 school year has significantly increased compared to the first semester of 2020. Also, in the case of Worst 3% or less, the significance probability is 0.000, which is less than 0.05, so the null hypothesis that 'the difference between the two scores is the same' was rejected, indicating that the Worst score for the 2021 school year was significantly higher than that for the first semester of 2020.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1050-1059
• /
• 2010

The GFRP(Glass-Fiber Reinforced Plastic) Pipe is designed to behave safely against the external forces and to secure stability of deformation and settlements in pipe, Since it is laid under the ground. In this syudy, the evaluation for stability was carried out by performing the preliminary numerical analysis to decide the sclae effect in case of indoor model test. As a result of, strain of laying pipes is preponderantly reviewed. Numerical analysis is conducted to evaluate on the field application through the comparison concerning relations between deformation and differential settlement in the GFRP and hume pipes.

• KIEAE Journal
• /
• v.9 no.2
• /
• pp.53-58
• /
• 2009

There are increasing developments and uses of functional building materials are recently developed and introduced to the test method for the materials. Especially, moisture problem has a major role are also being established in indoor air quality problems. The purpose of this study is to evaluate the water vapour adsorption/desorption property of a ceiling material. The variation of the temperature and moisture were measured with the application materials by mock up test based on JIS 1470-1. The result shows that water vapour adsorption/desorption property of ceiling material is appeared in changes of moisture adsorption and desorption in comparison with that of a general ceiling material. Therefore, in case of decreasing and increasing in humidity, these materials can be used as an finishing material to sustain comfort condition.

• Korean Journal of Human Ecology
• /
• v.2 no.2
• /
• pp.49-62
• /
• 1999

The purpose of this study is to evaluate the combination of details on the maternity clothes of one-piece type through visual evaluation which helps compensating pregnant women＇s body defects for their more attractive fashion styles. The data evaluated by a multiple ranking test were analyzed by mean, paired t-test, general linear models procedure and Duncan＇s multiple ranged test. The result are as follows : 1) The pregnant woman wearing the one-piece dress with notched collar, pleats and whole button looks longer in lower part of bodies, smaller in upper body, slimmer, have less appeared bust and abdomen, more balanced as a Whole than when wearing others. And also, it makes a pregnant woman be seen more refined and simple. 2) In case of a pregnant woman, a one-piece dress with notched collar, tuck and whole button makes her look longer in neck, narrower in shoulder, and more active than when wearing others. 3) With roll collar, pleats and whole button, it looks taller and more graceful than when wearing others.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.153-158
• /
• 2000

Nuclear reactor pressure vessel should be safety even in the case that hypothetical defects with allowable size are in vessel. Therefore, the materials should have excellent fracture resistance characteristics. The purpose of this study is to analyze the results of preirradiation baseline test of nuclear pressure vessel for Yonggwang Unit 5/6. In experiments, drop weight tests and impact tests are carried out to obtain nil-ductility transition reference temperature, $RT_{NDT}$ and static and dynamic fracture toughness tests are performed to compare with $K_{IR}$ curve in accordance with ASME Sec.III. The test results show that the materials had sufficiently fracture resistance characteristics for 40 years of design life.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.419-426
• /
• 2002

In this study, the steel strip reinforcement bolted with braced angles is displayed skin friction resistance as well as passive resistance through existing the steel strip reinforcement. To understand pullout behavior characteristics, friction effects between soil and reinforcement are evaluated with the width of reinforcement, magnitude of surcharge, and existence of passive resistance member through laboratory pullout test. To analyze interference effects for passive resistance member, various tests are carried on case that the number, the location, and the spacing of braced angles are different. Using this test result, pullout resistance factor is calculated to consider location of braced angles and degree of interference for spacing ratio.