• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.739-747
• /
• 1997

This study was performed to clarify various conditions on the test of lipoxygenase-l and to establish the application of new test method for varietal improvement of soybeans in order to decrease beany flavors. Potassium borate and Tris were used as buffer and O.1M potassium borate solution showed the best result for the lipoxygenase-l test. In the range of pH 8.5~9.0 of the buffer, 2mM linoleic acid as substrate was effective. For color development, 100$\mu$l of two solutions(KI and starch) were added to the half soybean seed, successively. The substrate solution included linoleic acid was stored safely for 10 days at 4$^{\circ}C$ in refrigerator and for 4 days at room temperature. The best result was as follows; the 1ml of substrate solution[0.1M potassium borate(pH 9.0), 0.1％ Tween-20, 2mM linoleic acid] was added to the chipped half soybean seed in l.5ml plastic tube, waited for 15 minutes, and 100$\mu$l of color development solutions(5％ saturated KI in 15％ acetic acid, 1％ starch) were added to the tube, successively. After 4 hours, the purple color was observed in the upper phase of the plastic tube in the presence of lipoxygenase-1 and milky color in absence of lipoxygenase-1. The purple color was stable from 4 to 24 hours. There was no interfering effect by lipoxygenase-2 and -3. The plastic tube should be placed in the tube stand without shaking during the lipoxygenase-l test.

• Journal of vocational education research
• /
• v.37 no.4
• /
• pp.1-22
• /
• 2018

The study tried to investigate the school curriculum organization and teacher's perceptions about test subjects in vocational education division of the college scholastic ability test based in the 2015 revised national curriculum. This study asked vocational teachers to fill in basic questionnaire that consists of 9 relevant and subjective items for the school curriculum organization and test subjects in vocational education division of the college scholastic ability test based in the 2015 revised national curriculum. For this, the survey was conducted 58 schools of 92 schools in technical specialized high schools, meister high schools and vocational high schools about test subjects of 2015 revised national curriculum. As a result, the 'Successful career life' subject was 53.5%, the most organized in the first grade. 'test course 1' was 55.2% and 'test course 2' was 72.4% the most organized in the first grade. The Opinions on the test courses were the highest in the two subjects in the same series as the present. The teacher's perceptions showed that the current test subjects in vocational education division of the college scholastic ability test are valid. The most important factor affecting difficulty was 'The Ministry Education's policy' in vocational education division of the college scholastic ability test.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.183-193
• /
• 1996

The objective of this study is to investigate the characteristics of elastic and inelastic bekavior of ductile momenting-resisting reinforced concrete frame subjected to reversed lateral loading such as earthquake excitations. For this purpose, a 2-bay 2-story reinforced concrete plane frame with seismic detail was designed and one 1/2.5-scale subassemblage was manufactured according to the required similitude law. Then, the reversed load test under the displacement control was performed statically to this subassemblage. Finally, the results of this test were analysed regarding to (1) the design load vs actual strength, (2) degradation in stiffness and strength. (3) failure mode or energy dissipation. (4) local deformations.

• Korean Journal of Veterinary Service
• /
• v.15 no.2
• /
• pp.101-108
• /
• 1992

This study was carried out to investigate the effect of sulfamethazine and trimethoprim on TTC test in raw milk. Ten raw milks which does not contain any antibiotics were collected from milk farms and one hundred twenty raw milks which collected from three raw milk receiving stations and those milk samples were mixed up sulfamethazine and trimethoprim for TTC test. The results were as follows ; 1. Positive reactions of TTC test were shown above the concentration of 3, 000ppm for sulfamethazine and 10ppm for trimethoprim. 2. When the TTC test was conducted with trimethoprim and sulfamethazine mixture, a pair of the concentration of trimethoprim and sulfamethazine shown to positive reaction were 0.1-2, 000ppm, 0.5-1, 000ppm, 1.0-250ppm and 2.0-100ppm, respectively. 3. Of 120 raw milk samples tested, 16 samples(13%) were shown quasi-positive reaction when the trimethoprim at the concetration of 2ppm was added in the samples.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.200-210
• /
• 2006

This C-ring test, normally employed for evaluating susceptibility to stress-corrosion cracking, was determined to be a suitable small scale test to evaluate PWHT(Post-Weld Heat Treatment) cracking susceptibility. This test is possible to incorporate an actual weld, to introduce a notch into the coarse grained HAZ(Heat Affected Zone), to load the coarse grained HAZ any level of stress ad, most importantly, since the C-ring is an approximately constant strain type test, the stress decreases with time at temperature in a manner similar to that of an actual steel weldment. The procedure employed in making the C-ring was presented in the experimental procedure section, however, several points deserve further discussion. The walls of the weld groove are made along radial lines form the center of th var in order to obtain an HAZ which is oriented perpendicular to the walls of the machined C-ring. Therefore, the plane of maximum stress will be aligned through the HAZ and, therefore, crack propagation will not be forced to deviate form the plane of maximum stress in order to remain in the coarse grained HAZ as is the case with the Y groove test.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.1-10
• /
• 1998

Testing high reliability devices under nomal operating condition is difficult, because the devices are not likely to fail in the relatively short time available for tests. For most applications it is necessary to accelerate the causes of failure by increasing a stress above its nomal value. Previous accelerated life test(ALT) plans have shown how to find optimum allocation, lowest stress and sample size subject to minimizing the variance of mean life estimator. In these ALT plans, the highest acceptable test-stress was assumed to be specified in advance by the experimenter but there is no guidance for selecting it. This assumption is, however, inappropriate for many applications. Testing devices at too-high stress levels can invalidate the extrapolation model, or introduce failure mechanisms that are not anticipated under nomal operating conditions. In this paper, we propose new 4:2:1 compromise plans using Min-Max method to minimize this risk and present minimized test-stress levels(max, middle, min), and find sample allocation based on Min-Max 4:2:1 compromise plans. In result, we compare previous 4:2:1 compromise plans specified maximum test-stress with Min-Max 4:2:1 compromise plans minimized maximum test-stress.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.997-999
• /
• 2005

In order for efficient Bluetooth Baseband functional test, Bluetooth SIG (Special Interest Group) provides with Test Suite Structure (TSS) in the Bluetooth specification version 1.1. Bluetooth Baseband hardware which needs to be authenticated should implement the test specification defined in the TSS part I.1 through I.3. In this paper, we discuss the method to verify and test a Bluetooth Baseband implementation based on the TSS version 1.0. Also, we describe various senario and implementation possibilities to perform the Bluetooth Baseband authentication test.

• Biomolecules & Therapeutics
• /
• v.14 no.4
• /
• pp.246-252
• /
• 2006

1,2-Dibromoethane(DBE) has been widely used as a soil fumigant, an additive to leaded gasoline and an industrial solvent. In this study, we have carried out in vitro genetic toxicity test of 1,2-dibromoethane and microarray analysis of differentially expressed genes in response to 1,2-dibromoethane. 1,2-Dibromoethane showed mutations in base substitution strain TA1535 both with and without exogenous metabolic activation. 1,2-Dibromoethane showed mutations in frame shift TA98 both with and without exogenous metabolic activation. 1,2-Dibromoethane showed DNA damage based on single cell gel/comet assay in L5178Y cells both with and without exogenous metabolic activation. 1,2-Dibromoethane increased micronuclei in CRO cells both with and without exogenous metabolic activation. Microarray analysis of gene expression profiles in L5178Y cells in response to 1,2-dibromoethane selected differentially expressed 241 genes that would be candidate biomarkers of genetic toxic action of 1,2-dibromoethane.

• Journal of Korea Foundry Society
• /
• v.6 no.1
• /
• pp.27-35
• /
• 1986

The gating design of gray cast iron was programmed in a Personal computer. By this program, casting test was done. The results obtained are as follows. 1. Gating design that can calculate the velocity of metal flow and size in each gate section by knowing the loss coefficient caused by friction loss and bend loss was programmed. 2. In the test casting, the gating ratio was changed into 1.1:1.3:1, 1:2:2, 1:4:4. And sound casting, free of sand washing defect, was obtained at the velocity of 35.5cm/sec in ingate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.24-28
• /
• 1986

The maneuverabilities of the M. S. PUSAN 402 are studied, based on maneuvering indices and the data obtained from her Z test. The results obtained are summarized as follows: 1. The maneuvering indices K' and T' of the M. S. PUSAN 402 are 1. 490, 1.030 at 10$^{\circ}$ Z test and 2.644, 1.153 at 20$^{\circ}$ Z test and 3.382. 1. 027 at 30$^{\circ}$ Z test respectively. The above calculated values K', T' showed that her maneuverabilities are more increased when the rudder is used to large angle than to smaIl angle. 2. As her maneuvering indices K' and T' at 10$^{\circ}$ Z test are higher than the standard maneuvering indices of fishing boats, her turning ability was found to be higher but her obeying ability lower. 3. When the M. S. PUSAN 402 took a turn at her 10$^{\circ}$ test, running distance was about 8.4 times her own length and didn't exceed the standard maneuvering distance, 5 to 11 times ship's own length, therefore she was considered to have good maneuverabilities syntheticaIly.