• International Journal of Reliability and Applications
• /
• 제8권2호
• /
• pp.125-135
• /
• 2007

In this paper, testing exponentiality against new better than used in convex average and denote by (NBUCA), or its dual (NWUCA) is investigated through the U-test. The percentiles of these tests are tabulated for samples sizes n = 5(1)40. The power estimates of the test are simulated for some commonly used distributions in reliability. Pitman's asymptotic efficiency of the test is calculated and compared. Data of 40 patients suffering from blood cancer disease (Leukemia) is considered as a practical application of the proposed test in the medical sciences.

• 한국과학교육학회지
• /
• 제16권3호
• /
• pp.314-328
• /
• 1996

This study investigated the literature about science process skills' evaluation to analyse transition of evaluation objectives before and after a Scholastic Ability Test for College Entrance. In the literature survey the researcher established a 3 dimensional science assessment framework with X axis as science concept, Y axis as science process skills and Z axis as problem context. In order to analysis and compare each items the researcher selected 210 items from the 1st to the 7th trials and 138 items from the 1st to 4th Scholastic Ability Test for College Entrance and sampled 2873 science achievement test items from 10 high schools. In accordance with this taxonomy the researcher analysed and compared science process skills item forms. The following results were drawn : The items were evenly distributed in all the four areas(Earth Science, Biology, Physics and Chemistry) of the science concept domain, but they were heavily concentrated on data analysis and drawing a conclusion in science process domain. In the domain of problem context school context was the majority. In spite of distribution like this the ratio on science process skills measurement items and science achievement test items was increased after the Scholastic Ability Test for College Entrance was given. Also the ratio on item expression type was increased. Item form was almost 5 options selection type in the national level test. Although there were 4 options selection type, 5 options selection type, short answer type, essay type in school level test, rising from 33.1% to 65.5% on 5 options selection type is exhibited. This study showed that the school level item form was better various than the nation level. This point like this is the evidence for the improvement toward the science process skills test and influenced by Scholastic Ability Test for College Entrance. The ratio on the item which joined with the 3 axes had a mean of 99.3% in nation level test and mean 44.9% in school achievement test level. But the ratio in the school achievement test level increased after the Scholastic Ability Test for College Entrance was given. In view of this study we must furthermore study the item types which can evaluate valjdately science process skill's five stage each and evaluation method by the high school students' problem solving patterns and features in scientific inquiry on all science process skills elements.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.1-7
• /
• 1992

The conformance test is a methodology which verifies whether the Implementation Under Test (IUT) conforms to its standard specification or not. In this paper, first, the Conformance Test System(CTS) is implemented in prototype including verification test type, black-box test strategy, conformance test class, remote test structure, and IUT which is described by the ISO Estelle among Formal Description Techniques. Second, through this prototype the proposed system is experimented. The prototype is composed of two modules. The first module is the Estelle-to-Pascal preprocessor which converts the Estelle program to the corresponding Pascal program because the experimental IUT was described using the unexecutable code form of Estelle before being tested by the TD(Test Driver). The TD, the second module, is based on the master-slave concept and plays important role is CTS. The TD acts as the master with the IUTd being the slave. The prototype system is implemented using Turbo-C, Turbo-Pascal and Turbo-Assembly.

• 소성∙가공
• /
• 제3권1호
• /
• pp.51-62
• /
• 1994

Cup drawing test and U-bending test were performed to evaluate the friction characteristics of sheet materials for the different deformation modes involved in stamping process. The coefficient of friction calculated from the each test was compared to that obtained from the draw bead friction test. It was clarified that the cup drawing test could be simply used for evaluating the friction characteristic of sheet material in deep drawing process with high contacting pressure. However the U-bending test is suitable to evaluate the frictional characteristic of sheet material in bending process with low contacting pressure.

• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.67-72
• /
• 2006

This study is on the development of algorithm of surge test for quality control on electrical parts of throttle body in automobiles with internal combustion engine, not only to know its condition to be good or not, but also jugding its condition to be classified into six types. To know whether its condition to be good or not, comparing and analyzing between two waveforms generated from master and test coil of throttle body. If test net area is below 20% of master area, the condition of test coil is good. By analyzing test coil waveform to master coil waveform, the condition of test coil into winding badness, insulation badness, layer and corona discharge, short badness should known. Therefore quality control system on electrical parts of throttle body should be developed.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.1-6
• /
• 2002

Engine lubrication system is generally affected by vehicle driving conditions, which are composed of acceleration, braking deceleration and accelerating during cornering. The major reason is due to the oil pan system in which oil is directly influenced by inertia farce caused by vehicle driving conditions. Therefore, to confirm safety of engine lubrication system inertia farce effects are also considered in the developing state. For the purpose, we have carried the engine tilting tests using ourselves made test rig. Verifying the test results we also measured the inertia effects on the engine lubrication system using the circular tuning and slalom test with vehicle. Through the comparison study between two kinds of results we obtained that the engine tilting test rig was very useful to confirm the safety evaluation of engine lubrication system.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1570-1575
• /
• 2018

The increased penetration of PV is impacting on grid operation and in particular the voltage within the local grid can be significantly influenced by the various PV systems. The increased penetration of PV is impacting on grid operation and in particular the voltage within the local grid can be significantly influenced by the various PV systems. This paper describes domestic technical standard of Photovoltaic(PV) PCS(Power Conditioning Systems)- Characteristics of the utility interface. Especially protective function test items of 1) Output overvoltage protection test, 2) Output undervoltage protection test, 3) Frequency rise protection test, 4) Frequency fall protection test, 5) System voltage's momentary interruptions, 6) System voltage distortion capability test. Therefore in this paper protective function test item of facilities evaluation detailed standards for new renewable energy, small, medium and large photovoltaic inverter standard is studied and analyzed and finally full tested by PV inverter performance function.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.195-201
• /
• 2015

This study discusses a fuel injector test bench containing a mechanical type fuel supply system for heavy duty diesel engine. The main focus of this study was to evaluate the design stability of the test bench, which basically measures the injector durability of a multi-hole heavy duty injector by using pure diesel as a test fuel. In this experiment, diesel spray was controlled by a specially designed control box and all the experiments were carried out to measure e.g. fuel injection pressure and fuel injection quantity to understand the injection status which is interlinked with the stability factor of total test bench design. Also, the durability test was performed to understand the heavy duty operation lastingness of the designed system and the flow rate of the installed distributor pump in the fuel supply system of this studying test bench was compared with LO-1 and LO-2 pump. The results of the above mention tests revealed that the injector test bench design and control system can serve the purpose for heavy duty injector.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.630-638
• /
• 2011

A new smooth bore test barrel was developed to be used in sensitivity assessment test for explosives and fragment impact test. The bore diameter of the barrel is 20 mm, and the powder chamber is designed to be replaceable with the 12.7 mm, 20 mm and 30 mm type chamber. The test results showed the wide range of fragment velocity from 400 to 2000 m/s, included the fragment velocity requirement of the fragment impact test(alternate procedure #1) in MIL-STD-2105B. The stability of the bullet trajectory was checked by test shots and the structural safety of the system has been confirmed through the stress analysis and the interior ballistics analysis of the barrel.

• 복식
• /
• 제50권3호
• /
• pp.73-86
• /
• 2000

This study is to develop the well-fit brassieres by wearing test of available brassieres for girls . The 11 elementary school girls aged 12 participated in the wearing test. The test procedure consisted of a rating on fit and performance according to brassiere types, a try on test of 3 types of brassiere and a sensory test on fit. The results of this study are as follows ; 1. The results of fit rating on different brassieres. Compared among brassiere types, tank top type proved the most effective, from a viewpoint of wearing effects. All types of brassiere performed well in bust up effect. Especially tank top type brassiere showed the best of them. 2. The results of the sensory test and comparative test. With regard to wear comfort, most of the subject assessed tank top brassiere to be the most comfortable . As for freedom of movement, it is disclosed that the subjects prefer tank top brassiere. As a result, brassiere for girls strongly require size adjustment, physical and psychological comfort through full overage of breast area.