• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.659-670
• /
• 2004

임베니드 소프트웨어의 품질시험을 통해 임베디드 시스템 子매자늘의 요구에 부합되는 고품질의 시스템을 구현할 수 있다. 임베디드 소프트웨어의 경우, 아직까지 국내에서 활용할 수 있는 구체적인 품질시험 체계가 구축되어 있지 않은 실정이다. 최근 다양한 임베디드 시스템들이 개발되고 있으나 결함으로 인한 리콜 등 품질면에서 많은 문제점들이 노출되고 있다. 본 연구에서는 임베디드 소프트웨어 평가를 위해 ISO/IEC 12119를 근간으로 하여 품질시험을 수행할 수 있는 평가모듈과 품질검사표를 개발하여 임베디드 소프트웨어 평가에 적용할 수 있도록 하였다.

• 도시과학
• /
• 제11권1호
• /
• pp.9-13
• /
• 2022

Currently, RC slab bridges in use in Korea account for most of the total bridges, and bridges with a service life of 20 years or more account for about 75%. However, most of these RC slab bridges have a span of less than 20m and are not included in the first and second types of facilities, so maintenance is very neglected. Therefore, in this study, field load test is performed on an aged RC slab bridge, and the performance evaluation is performed based on the structural response results (deflection, impact coefficient, natural frequency, etc.) of the bridge obtained through field load test. In addition, the performance evaluation results obtained through the load test are intended to be used as basic data for the damage evaluation process of the bridge currently under development.

• 한국시뮬레이션학회논문지
• /
• 제21권1호
• /
• pp.89-96
• /
• 2012

최근 모델링 및 시뮬레이션 기술이 다양한 분야에서 활용되고 있으며 특히, 국방 분야에서는 모의기반획득(Simulation Based Acquisition)이 필수적인 정책으로 인식되고 있다. 모의기반획득 과정 중 시험평가 단계에서는 실제 시험이 불가능한 시험평가 환경을 모의하고 실장비 연동검증을 위한 모의 기반 시험환경 구축이 필요하다. 이때 시험평가의 효율성 및 신뢰성향상을 위해 시험평가 장비의 상호운용성, 재사용성 및 신뢰성 확보가 중요하다. 본 연구에서는 지대공 유도무기 체계 시험평가의 효율성을 위해 시뮬레이션 프레임워크 기반 모의기를 제작하였고 시험평가 신뢰성 향상을 위해 VV&A 프로세스를 적용하였다. 지대공유도무기 시험평가를 위한 통합시험시스템의 개발과정 및 특징에 대해 설명하고 실제 시험평가 적용사례 및 결과를 제시하며 향후 활용방안 및 연구방향에 대하여 설명한다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.471-478
• /
• 2014

Navy forces of ROK asked for more than 90% operational availability in the requirement document of combat ship. This study proposes the evaluation methodology of operational availability with the evaluation process, calculation formula, analysis of operational test data. As the case study, the developed methodology is proved to apply for 00 batch-I naval ship using the data to be acquired during the operational test period. The operational availability by test data was 90.03%, and it was satisfied with objective value 90%. The paper will contribute not only to establish the evaluation methodology of operational availability for combat ship but also other general weapon system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.93-99
• /
• 2000

This study deals with the evaluation of bending fatigue strength in shaving gears, We manufactured gears using manufacture processes that are currently used in most gears manufacturing companies. The test gears are hobbed then the tooth surface are treated by a combination of shaving carbonizing and shot peening. The constant stress amplitude fatigue test is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. In this study we investigated the effect of shaving process and shot peening on fatigue strength, The effect of shaving process ad shot peening on the fatigue strength is evaluated quantitatively,. The enhancement of fatigue strength due to shaving process and shot peening is clarified

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.173-183
• /
• 2018

Purpose: It is critical to design a set of experiments in Test and Evaluation Process for a weapon system. Because there is no sufficient resources in real-world, one must choose a subset of experiments which is considered to be more important. Methods: We introduce an optimization model for choosing the subset of experiments by considering a priority of experimental variable and level and restrictions of resources. We describe in detail how we construct objective function and constraints which must be a right realization of our logic and assumption. Conclusion: Since our optimization model turns out to be computationally difficult to solve, we introduce an algorithm for reducing the size of problem. Various computational results follows.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.1-4
• /
• 2015

An accurate measurement of the train-track interaction forces is important for track performance evaluation. In the field calibration test as a wheel load measurement process, the calibration system creates a different boundary condition in comparison with that in the train wheel passage. This study aims to evaluate a reliability of the field calibration test in the process of wheel load measurement. Finite element models were developed to compare the deformed shapes, bending moment and shear force profiles on the rail section. The analysis results revealed that the deformed shapes and their associated bending moment profiles on the rail are significantly different in two numerical simulations of the calibration test and the train wheel load passage. However, the shear stress profile on the rail section of the strain gauge installation in the field was almost identical, which may imply that the current calibration test is sufficiently reliable.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.137-144
• /
• 1994

According to the cementing process, adhesive for dress shoe applicable to the style of ladies' has steadily been developed. In the study on the evaluation, mathematical model is presented. In the study on the quality control, a list of test results from field application and a model of manufacturing process including adhesion process are introduced.

• Transactions on Electrical and Electronic Materials
• /
• 제2권4호
• /
• pp.19-23
• /
• 2001

In this paper, design considerations and manufacturing procedure of 200 class insulation system with polyimide(Kapton) main insulation and silicone resin VPI process on the traction motor thor EMU will be reviewed. The performance test and the long life evaluation test that prove stability and reliability of Insulation system for traction motor will also be introduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1491-1495
• /
• 2004

For the evaluation of the mobile robot performance in complex environments, the experimental approach in an actual physical environment has been commonly taken. In the physical experimental approach, however, it is quite difficult to define the proper environment for the evaluation due to the lack of commonly agreed characteristics of the test environment. Particularly the number of combinations of types and physical parameters of the obstacles that the mobile robot is expected to deal with is practically unlimited. In an effort to simplify and improve the effectiveness of the evaluation process, we propose an evaluation method using decomposed environmental elements, where we evaluated the performance of the robot for a small group of simple and decomposed obstacle components, for examples projection and slope, instead of a large group of complicated random obstacles. The paper describes a set of simple obstacle models and performance parameters that we have chosen for the effective evaluation process. As an alternative to the physical experimental evaluation approach, in this paper, we used a virtual evaluation environment where the robot and the physical test environment has been modeled using a commercial multi-body dynamics analysis packaged called RecurDyn.