• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.140-140
• /
• 2017

최근 기후변화에 따른 태풍과 국지성 집중호우의 증가로 국토의 64%가 산지인 우리나라에서는 재해의 위험성을 증가시키고 있다. 재해 분석에 있어 기초자료로 사용되는 지형자료의 정확도는 재해분석결과에 있어 중요하며, 지형촬영방법에 따라 정확도의 차이가 매우 크다. 지형자료 중 하나인 DEM(Digital Elevation Model) 활용분야 또한 확대되고 있고 지도제작에 있어 DEM을 사용하면 지형도를 신속히 제작할 수 있고, 편집 용이, 수작업 인원 감축, 정확도 향상 및 데이터베이스의 구축이 이루어져 체계적으로 종합적인 지형정보를 관리할 수 있는 장점이 있다. 지상 LiDAR를 이용하여 생성한 DEM은 매우 정확한 방법이며, 접촉식 측량장비에 비하여 누락되는 데이터가 적으며 정밀하게 자료를 수집가능 한 것이 장점이다. 지상LiDAR를 이용한 자료 취득 시식생과 구조물에 의해 촬영 각도가 제한되는 경우 충분한 자료를 얻기 위해 여러 위치에서 스캔이 필요하다. 한편 전 세계적으로 드론의 도입으로 인해 다양한 분야에서 높은 가능성을 가지고 활용되고 있는 실정이며, 드론을 이용한 연구들도 활발히 진행 중이다. 소규모 및 중간 규모의 하천, 산지 등의 현장 조사의 경우 LiDAR장비의 진입이 어려운 구간의 촬영 시 드론을 활용하면 보다 효율적일 것으로 예상된다. 이에 따라 본 연구는 지상LiDAR와 드론을 이용하여 얻은 DEM 자료를 비교 분석하여 드론으로 생성된 DEM 자료 활용 가능성 여부를 검토하였다. 본 연구에서는 동일한 지역에 지상LiDAR와 드론 촬영을 실시하여 지형자료를 각각 획득한 후 후처리 프로그램을 이용하여 영상분석을 실시하였다. 또한 측점을 선정한 후 지형 좌표의 편차, 표고의 편차 등을 비교분석하였다.

• Journal of the Korean Geographical Society
• /
• v.48 no.3
• /
• pp.321-335
• /
• 2013

High resolution data for the coastal sand beach during short-term in Jinbok-ri, Uljin-gun, Gyeongsangbuk-do are obtained by terrestrial LiDAR. The micro-geomorphological changes of 8 times before and after the strong low-pressure events during June to September, 2009 and changes under the various environments of wave-energy are investigated in the study. The obvious geomorphological changes between the northern and southern sand beach in Jinbok-ri are revealed by terrestrial LiDAR as well as by grain size analysis. The strong waves by the typhoons decrease the area and volume of the beach, and especially the area is largely influenced. The erosive and depositional processes dominate the northern and southern sand beach, respectively, after high wave in September. These results suggest that lots of sand grains in the beach are largely re-transported within the beach rather than offshore.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.392-401
• /
• 2014

This research was carried out to understand the impact of mountainous torrent on topographical change of slope and sediment volume within a deposit line by dredging of soil erosion control dam. Terrestrial LiDAR surveys were conducted at dredged and non-dredged sites. Terrestrial LiDAR has an advantage on detecting topographical changes easily without demanding workmanship and technical skill for users. The distribution of erodible slope ($20^{\circ}-40^{\circ}$) was higher in non-dredged site than that of dredged site. However, the distribution was higher in dredged site than that of non-dredged site after rainy season. Erosion and deposition appeared regularly in a dredged site, but those occurred irregularly in the non-dredged site. The inflow of soil per square meter was 1.7 times higher in dredged site than that of non-dredged site after rainy season. The difference of rainfall in each site did not affect to soil erosion. The distribution of erodible slope was increased in dredged site than that of non-dredged site after rainy season due to inflow of soil from upper stream caused by dredging.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.111-124
• /
• 2021

Recently, Interest in the restoration and 3D reconstruction of cultural properties due to the fire of Notre Dame Cathedral on April 15, 2019 has been focused once again after the 2008 Sungnyemun fire incident in South Korea. In particular, research to restore and reconstruct the actual measurement of cultural properties using LiDAR(Light Detection and ranging) and conventional surveying, which were previously used, using various 3D reconstruction technologies, is being actively conducted. This study acquires data using unmanned aerial imagery of UAV(Unmanned Aerial Vehicle), which has recently established itself as a core technology in the era of the 4th industrial revolution, and the existing CRP(Closed Range Photogrammetry) and terrestrial LiDAR scanning for the Recumbent Buddha of Unju Temple. Then, the 3D reconstruction was performed with three fusion models based on SfM(Structure-from-Motion), and the reproducibility and accuracy of the models were compared and analyzed. In addition, using the best fusion model among the three models, the relationship with the Polar Star(Polaris) was confirmed based on the real world coordinates of the Recumbent Buddha, which contains the astronomical history of Buddhism in the early 11th century Goryeo Dynasty. Through this study, not only the simple external 3D reconstruction of cultural properties, but also the method of reconstructing the historical evidence according to the type and shape of the cultural properties was sought by confirming the historical evidence of the cultural properties in terms of spatial information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.97-103
• /
• 2011

LiDAR system has become a popular tool for generating 3D surface data such as Digital Surface Model. Extraction of valuable information, such as digital building models, from LiDAR data has been an attractive research subject. This research addresses to extract planar patches from LiDAR data. Planar patches are important primitives consisting of man-made objects such as buildings. In order to determine the best fitted planes, this research proposed a method to reduce/eliminate the impact of the outliers and the intersection areas of two planes. After finishing plane fitting, planar patches are segmented by pseudo color values which are calculated by determined three plane parameters for each LiDAR point. In addition, a segmentation procedure is conducted using the pseudo color values to find planar patches. This paper evaluates the feasibility of the proposed method using both airborne and terrestrial LiDAR data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.139-144
• /
• 2011

This study proposed a classification method of LIDAR data by using simultaneously the color information (R, G, B) and reflection intensity information (I) obtained from terrestrial LIDAR and by analyzing the association between these data through the use of statistical classification methods. To this end, first, the factors that maximize variance were calculated using the variables, R, G, B, and I, whereby the factor matrix between the principal factor and each variable was calculated. However, although the factor matrix shows basic data by reducing them, it is difficult to know clearly which variables become highly associated by which factors; therefore, Varimax method from orthogonal rotation was used to obtain the factor matrix and then the factor scores were calculated. And, by using a non-hierarchical clustering method, K-mean method, a cluster analysis was performed on the factor scores obtained via K-mean method as factor analysis, and afterwards the classification accuracy of the terrestrial LiDAR data was evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5695-5706
• /
• 2015

Recently adoption of BIM technology for building renovation and remodeling has been increased in construction industry. However most buildings have trouble in 2D drawing-based BIM modeling, because 2D drawings have not been updated real situations continually. Applying reverse engineering, this study analysed the point cloud data structure and the process for guideline of reverse engineering of architectural MEP, and deducted the relating considerations. To active usage of 3D scanning technique in domestic, the objective of this study is to analyze the point cloud data processing from real site with terrestrial LiDAR and the process from data gathering to data acquisition.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.55-63
• /
• 2021

The roughness of the road is an important factor directly connected to the ride comfort, and is an evaluation item for functional evaluation and pavement quality management of the road. In this study, data on the road surface were acquired using the latest 3D geospatial information construction technology of ground LiDAR, drone photogrammetry, and drone LiDAR, and the accuracy and roughness of each method were analyzed. As a result of the accuracy evaluation, the average accuracy of terrestrial LiDAR were 0.039m, 0.042m, 0.039m RMSE in X, Y, Z direction, and drone photogrammetry and drone LiDAR represent 0.072~0.076m, 0.060~0.068m RMSE, respectively. In addition, for the roughness analysis, the longitudinal and lateral slopes of the target section were extracted from the 3D geospatial information constructed by each method, and the design values were compared. As a result of roughness analysis, the ground LiDAR showed the same slope as the design value, and the drone photogrammetry and drone LiDAR showed a slight difference from the design value. Research is needed to improve the accuracy of drone photogrammetry and drone LiDAR in measurement fields such as road roughness analysis. If the usability through improved accuracy can be presented in the future, the time required for acquisition can be greatly reduced by utilizing drone photogrammetry and drone LiDAR, so it will be possible to improve related work efficiency.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.5-24
• /
• 2022

The current performance evaluation of slope anchors qualitatively determines the physical bonding between the anchor head and ground as well as cracks or breakage of the anchor head. However, such performance evaluation does not measure these primary factors quantitatively. Therefore, the time-dependent management of the anchors is almost impossible. This study is an evaluation of the 3D numerical model by SfM which combines UAS images with terrestrial LiDAR to collect numerical data on the damage factors. It also utilizes the data for the quantitative maintenance of the anchor system once it is installed on slopes. The UAS 3D model, which often shows relatively low precision in the z-coordinate for vertical objects such as slopes, is combined with terrestrial LiDAR scan data to improve the accuracy of the z-coordinate measurement. After validating the system, a field test is conducted with ten anchors installed on a slope with arbitrarily damaged heads. The damages (such as cracks, breakages, and rotational displacements) are detected and numerically evaluated through the orthogonal projection of the measurement system. The results show that the introduced system at the resolution of 8K can detect cracks less than 0.3 mm in any aperture with an error range of 0.05 mm. Also, the system can successfully detect the volume of the damaged part, showing that the maximum damage area of the anchor head was within 3% of the original design guideline. Originally, the ground adhesion to the anchor head, where the z-coordinate is highly relevant, was almost impossible to measure with the UAS 3D numerical model alone because of its blind spots. However, by applying the combined system, elevation differences between the anchor bottom and the irregular ground surface was identified so that the average value at 20 various locations was calculated for the ground adhesion. Additionally, rotation angle and displacement of the anchor head less than 1" were detected. From the observations, the validity of the 3D numerical model can obtain quantitative data on anchor damage. Such data collection can potentially create a database that could be used as a fundamental resource for quantitative anchor damage evaluation in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.1-14
• /
• 2019

In rural areas, composting is a source of non-point pollutants. However, as the quantitative distribution and loading have not been estimated, it is difficult to determine the effect of composting on stream water quality. In this study, composting datum acquired by unmanned aerial vehicle(UAV) was verified by using terrestrial LiDAR, and the management status and load change of the composting was investigated by UAV with manual control flight, thereby obtaining the basic data to determine the effect on the water system. As a result of the comparative accuracy assessment based on terrestrial LiDAR, the difference in the digital surface model(DSM) was within 0.21m and the accuracy of the volume was 93.24%. We expect that the accuracy is sufficient to calculate and utilize the composting load acquired by UAV. Thus, the management status of composting can be investigated by UAV. As the total load change of composting were determined to be $1,172.16m^3$, $1,461.66m^3$, and $1,350.53m^3$, respectively, the load change of composting could be confirmed. We expect that the results of this study can contribute to efficient management of non-point source pollution by UAV.