• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.252-256
• /
• 2001

The rapid development of communication equipment and information processing technology has led to a constant improvement in cordless communication. Lithium ion batteries used in cellular phones and laptop computers, in particular, have been in the forefront of the above revolution. These batteries use high value added raw materials and have a high and stable energy output and are increasingly coming into common use. The development of the material for the negative terminal has led to an improvement in the quality and efficiency of the batteries, whereas a reduction in the cost of the battery by researching new materials for the positive anode has become a research theme by itself. These long life batteries, it is being increasingly realized, can have value added to them by recycling. Research is increasingly being done on recycling the aluminum case and the load casing for the negative diode. This paper aims to introduce the current situation of recycling of lithium ion batteries. 1. Introduction 2. Various types of batteries and the situation of their recycling and the facts regarding recycling. 3. Example of cobalt recycling from waste Lithium ion secondary cell. 3-1) Flow Chart of Lithium ion battery recycling 3-2) Materials that make a lithium ion secondary cell. 3-3) Coarse grinding of Lithium ion secondary cell, and stabilization of current discharge 3-4) Burning 3-5) Grinding 3-6) Magnetic Separation 3-7) Dry sieving 3-8) Dry Classifying 3-9) Content Ratio of recycled cobalt parts 3-10) Summary of the Line used for the recovery of Cobalt from waste Lithium ion battery. 4. Conclusion.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.140-142
• /
• 2016

스마트폰의 급격한 확산은 우리 일상생활에 패러다임을 바꾸어 놓고 있다. 스마트폰은 개인용 컴퓨터와 유사한 수준의 고기능 환경구현이 가능한 범용 운영체제를 탑재하고 있다. 또한, 다양한 응용프로그램을 설치하거나 삭제할 수 있어 확장성이 뛰어난 이동통신 단말기이다. 이러한 확장성은 각종 앱 스토어를 통해 다양한 응용 프로그램을 사용할 수 있다. 그뿐만 아니라 위치를 기반으로 한 다양한 서비스와 클라우드 컴퓨팅 환경에서 다양한 서비스도 가능하다. 본 연구는 스마트폰 환경에서 클라우드 컴퓨팅 서비스가 사용자의 지속적 사용의도에 미치는 영향 요인을 알아보고자 한다. 결과를 바탕으로 연구의 한계와 시사점을 제시하고자 한다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.217-226
• /
• 2016

A new method is proposed based on a hidden Markov model (HMM) to estimate and analyze battery states of health. Battery system health states are defined according to the relationship between internal resistance and lifetime of cells. The source data (terminal voltages and currents) can be obtained from vehicular battery models. A characteristic value extraction method is proposed for HMM. A recognition framework and testing datasets are built to test the estimation rates of different states. Test results show that the estimation rates achieved based on this method are above 90% under single conditions. The method achieves the same results under hybrid conditions. We can also use the HMMs that correspond to hybrid conditions to estimate the states under a single condition. Therefore, this method can achieve the purpose of the study in estimating battery life states. Only voltage and current are used in this method, thereby establishing its simplicity compared with other methods. The batteries can also be tested online, and the method can be used for online prediction.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2022

The mobile device industry demands much higher levels of integration and lower costs coupled with a growing awareness of the complete system's configuration. A subsystem module package is similar to a board-level circuit that integrates a system function in a package beyond a System-in-Package (SiP) design. It is an advanced IC packaging solution to enhance the PDN and achieve a smaller form factor. Unlike a system-level design with a decoupling capacitor, a subsystem module package system needs to redefine the role of the capacitor and its configuration for PDN performance. Specifically, the design of package's form factor should include careful consideration of optimal PDN performance and the number of components, which need to define the decoupling capacitor's value and the placement strategy for a low impedance profile with associated cost benefits. This paper will focus on both the static case that addresses the voltage (IR) drop and AC analysis in the frequency domain with three specific topics. First, it will highlight the role of simulation in the subsystem module design for the PDN. Second, it will compare the performance of double-sided component placement (DSCP) motherboards with the subsystem module package and then prove the advantage of the subsystem module package. Finally, it will introduce three-terminal decoupling capacitor (decap) configurations of capacitor size, count and value for the subsystem module package to determine the optimum performance and package density based on the cost-effective model.

• 전기전자학회논문지
• /
• 제27권3호
• /
• pp.308-312
• /
• 2023

게이트 전류 감지 구조는 LDO 레귤레이터가 오버슈트 또는 언더슈트 상황 발생 시 출력전압의 레귤레이션을 보다 효과적으로 제어하기 위해 제안되었다. 기존의 전형적인 LDO 레귤레이터는 부하전류가 변화할 때 레귤레이션 전압 변화가 발생한다. 하지만 게이트 전류 감지 구조를 이용하여 패스 트랜지스터에 있는 게이트 단자 전류를 공급/방전 함으로 인해 패스 트랜지스터의 동작 속도를 더욱 향상시킬 수 있다. 게이트 전류 감지 구조를 이용한 LDO 레귤레이터의 입력전압은 3.3 V ~ 4.5 V 이며 출력 전압은 3 V이고 부하 전류는 최대 250 mA의 값을 갖는다. 시뮬레이션 결과, 부하 전류가 250 mA 까지 변화할 때 약 9 mV의 전압 변화 값을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.638-645
• /
• 2017

기체 유동층에서 입자비산속도에 관한 상관식을 사용하여 입자의 수송속도를 예측하는 모델을 제안하였다. Choi 등과 Li와 Kato의 상관식을 사용하여 emptying time 방법을 모사하였다. 기체속도의 단위에 의한 영향을 배제하기 위해서, 기체속도를 종말속도로 나눈 무차원 속도를 x-축의 값으로 사용하였다. y-축은 입자비산속도의 역수를 사용하였다. 기체속도를 증가시킬 때, y-값의 감소 기울기가 절대값으로 0.398 [$m^2s/kg$]를 나타내는 무차원 속도를 수송속도로 간주하였다. 모델의 예측값은 고온, 고압에서도 측정값과 비교적 잘 일치하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권8호
• /
• pp.475-481
• /
• 2005

In the existing ICT technique, the mounted electronic devices on the printed circuit board are tested whether the devices are good or not by comparing and measuring the value of the devices after separating the devices to be tested from around it based on the guarding method. But, in case that resistance, inductor and capacitor are configured as a parallel circuit on the circuit pattern, values for each device can not be measured because the total impedance value of the parallel circuit is measured. Accordingly, it is impossible to test whether the parallel circuit is good or not in case that the measured impedance value is within the tolerance error. Also, it is difficult to identify that which device among R, L and C of the parallel circuit is bad in case that the measured impedance value is out of the tolerance error. Accordingly, this paper proposes a test method which can enhance the quality and productivity by separating and measuring accurately R, L and C components from the RLC parallel circuits on the device-mounted printed circuit board. First, the RLC parallel circuit to be test is separated electrically from around it using three-terminal guarding technique. And then R, L and C values are computed based on the total impedance values and phase angles between voltage and current of the parallel circuit measured from two AC input signals with other frequency, Finally, the availability and accuracy of the proposed test method is verified by reviewing the simulation results.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.388-390
• /
• 2002

Two ferredoxin (Fd) fractions, namely, Fd-A and Fd-B were isolated from Heliobacillus mobilis cells, and purified by ammonium sulfate fractionation, DEAE, gel-permeation and Phenyl-Superose column chromatographies under anaerobic conditions. Their absorption spectra were typical of 2[4Fe-4S] cluster type Fds with peaks at about 385 and 280 nm and a shoulder at about 305 nm. Their N-terminal amino acid sequences were determined, which showed that both of them contain a [4Fe-4S] cluster binding motif. Fd-B was sensitive to oxygen, and itsA$_{385}$ value decreased by about 50% in 2 h at 4$^{\circ}C$ under aerobic conditions. In contrast, $A_{385}$ of Fd-A was essentially unchanged up to 24 h under the same conditions.

• 디지털산업정보학회논문지
• /
• 제9권3호
• /
• pp.59-65
• /
• 2013

This paper presents a novel calibration method for a base station system adopting an antenna array. The proposed technique utilizes Zadoff-Chu sequence, which is included in the LTE pilot signal periodically, in order to compute the phase characteristic of each antenna channel. As the Zadoff-Chu sequence exhibits an excellent autocorrelation characteristic, it is possible for the receiving base station to retrieve the Zadoff-Chu sequence transmitted from each mobile terminal. In addition, we can obtain the phase characteristic of each antenna channel, which is the ultimate goal of the calibration procedure. The proposed calibration algorithm has been implemented using an FPGA (Field Programmable Gate Array). We have applied the proposed algorithm to an array consisting of 2 antenna elements for simplicity. the phase value implied to the first and second antenna path is very accurately calculated from the proposed procedure. From the experimental test, the proposed method provides accurate calibration results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.669-671
• /
• 2004

This paper presents a MIMO nonlinear controller for the power system consisting of a turbine and a synchronous generator connected to an infinite bus. The controller proposed is based on feedback input-output linearization; its main goal is to regulate the terminal voltage and frequency, and is to improve the transient stability under large disturbances and unexpected faults. It is guaranteed that the voltage converges to its reference value exponentially, and that the frequency and the mechanical/electrical power are bounded. The design procedure is tested on a single machine infinite bus power system through simulations, and is seen to be effective.