• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.905-911
• /
• 2006

Smart homes are expected to offer various intelligent services by recognizing the residents' life pattern, health, and feeling. One of the key issues for realizing the smart home is how to detect the locations of residents. Currently, the research effort is focused on two approaches: terminal-based and non-terminal-based method. The terminal-based method employs a type of device that should be carried by the resident while the non-terminal-based method has no such device. This paper presents a novel non-terminal-based approach using an array of pyroelectric infrared sensors (PIRs) that can detect residents. The feasibility of the system is evaluated experimentally on a test bed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.402-408
• /
• 2016

In this paper, a new approach to the terminal sliding mode control using adaptive fuzzy sliding surfaces is proposed. The idea behind this approach is to utilize an adaptive sliding surface, in which the slope of the surface is updated on line using a SISO fuzzy logic inference system. We expanded the concepts of terminal sliding mode controller and proposed the terminal sliding mode control input with continuous reaching laws. The computer simulation results have shown the improved performance of the proposed control approach in terms of a decrease in the reaching and settling times and chattering free as compared to the conventional terminal sliding mode control with a fixed sliding surface. The proposed controller has also an advantage that has less computational burden to the conventional terminal sliding mode control using one-directional fuzzy rules.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.29-34
• /
• 2012

Nowadays, the problem of ETCS terminal in becoming popular gradually is that there is no services except for ETC. Therefore, we need new system that provide many type of additional services at one-terminal. In this paper, we study the additory function of ETCS terminal to afford many type of the vehicle administration beside collection and provider of traffic information. We descrived the method of Eco-driving function beside to save fuel signing instant and mean fuel-efficiency, measurement of section fuel-efficiency on OLED and then brings out the best driving habit in people and to prevent dangerous at the wheel as diagnosing engine oil, cooling water, fan belt, the point of changing consumables, diagnoses to an overheated engine, charges on generator through ECU. The multi-services terminal consist of the vehicle diagnosis module base on OBD-II and ETCS terminal.

• BMB Reports
• /
• v.28 no.6
• /
• pp.484-489
• /
• 1995

The product of bacteriophage T7 gene 2.5 is a single-stranded DNA binding protein and plays an important role in T7 DNA replication, recombination, and repair. Genetic analysis of T7 phage defective in gene 2.5 shows that the gene 2.5 protein is essential for T7 DNA replication and growth (Kim and Richardson, 1993). The C-terminal truncated gene 2.5 protein ($GP2.5-{\Delta}21C$) cannot substitute for wild-type gene 2.5 protein in vivo; suggesting that the C-terminal domain of gene 2.5 protein is essential for protein-protein interactions (Kim and Richardson, 1994; J. Biol. Chem. 269, 5070-5078). Truncated gene 2.5 proteins lacking 19 residues ($GP2.5-{\Delta}19N$) and 39 residues ($GP2.5-{\Delta}39N$) from the amino-terminal domain were constructed by in vitro mutagenesis. $GP2.5-{\Delta}19N$ can support the growth of T7 phage lacking gene 2.5 while $GP2.5-{\Delta}39N$ cannot substitute for wild-type gene 2.5 protein in vivo; however, its ability to bind to single-stranded DNA is not affected. These results clearly demonstrate that the 20~39 amino-terminal region of gene 2.5 protein is required for T7 growth in vivo but may not be involved in DNA binding activity.

• The Journal of the Korean dental association
• /
• v.10 no.6
• /
• pp.347-349
• /
• 1972

The authors selected fifty children aged 2 to 4 years who had normal occlusion from the patients admitted at the Pedodontic Department in the Infirmary of Dental College, S.N.U. Study casts were taken and observed on the primate spaces and terminal planes which are characteristics of primary dentition. The results were as follows: 1. The percentages of terminal planes were 56%±7.02 in mesial step type, 38.0%±6.86 in straight step type, 6.0%±3.36 in distal step type, respectively. 2. The percentages of primate space were 80%±5.09 in maxillary dental arch and 5.0%±7.06 in mandibular dental arch. 3. The percentage of mesial step type in korean children was higher in comparison with that in foreign children and the percentage of the primate space was about the same in korean & foreign children.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.118-130
• /
• 2011

In this study, hydrophilic polyurethane (PU) was synthesized by one shot process to get good non-swelling effect and to keep high breathability using reactive silicone oil of mono terminal and bi-terminal types. We also blended non reactive silicone oil with pure hydrophilic PU to compare non-swelling effect and breathability with hydrophilic PU synthesized by the two types of reactive silicone oils. The hydrophilic films were analyzed by nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photo electron (XPS) spectroscopy, energy dispersive spectrometry (EDS), breathability, waterproofness, tensile strength, contact angle and swelling effect. The results showed that the film made by hydrophilic PU which was synthesized with mono terminal type silicone oil provided good non-swelling effect and acceptable moisture permeability due to the modified surface properties.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.278-288
• /
• 2016

Automation ensures accurate and well-organized container transportation in container terminals. This paper addresses operational issues such as equipment scheduling and the coordination between various pieces of equipment in a rail-based automated container terminal. Containers are relayed using multiple types of equipment from road trucks to a vessel and vice versa. Therefore, handshaking is required during a container transfer between different pieces of equipment. Synchronization between the schedules of all the equipment is important to reduce equipment waiting times and the time required for transporting containers, which results in a short turnaround time for a vessel. This paper proposes an integrated control system with the objective of synchronizing the operations of different types of equipment, provides a list of decisions to be made by the control module of each type of equipment, and shows all the required information transfers between control modules. A scheme for the integrated scheduling of multiple types of equipment is proposed. The decisions made by each control module in a real-time fashion are listed with detailed explanations, and the information transfer between managers in a real-time situation at the proposed terminal is described.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.59-64
• /
• 1970

Human Bence Jones Protein could be purified by DEAF-Sephadex A-50 column $(2{\times}37cm)$ with 0.02M phosphate Buffer (pH 8.0) and gradient increasing with NaCl concentration as in Fig. 2-4. Sample As (K-type Bence Jones Protein) had two component, F-I was major component and its dried weight was 350mg. of starting material of 500mg. Other Sample Im and Ik (${\lambda}$-type Bence Jones Protein) was purified by DEAE-Sephadex A-50 with 0.02M phosphate Buffer(pH 8.0)too. F-I (major component) of Im and F-I of Ik were 242mg and 146mg. its dried weight respectively. K-type of Bence Jones Protein's(As, Ko, Ta.) N-terminal amino acid residue was determined by method of DNP,. K-type of Bence Jones Protein's amino acid residue were either glutamic acid or aspartic acid. Sample Ta was confirmed as glutamic acid its N-Terminal. As and Ko were aspartic acid. Each yellowish spot (DNP-amino acids) were extracted with 4ml. of pH 8.05% $NaHCO_3$ solution and calculated its recovery by O.D. $(360m{\mu}$ using the ${\varepsilon}=18.1{\times}10^3DNP$ $Asp\;{\varepsilon}=17.41{\times}10^(3)\;DNP\;Glu$ considering 50% lose during; the acid (6N-HCI) hydrolysis. Recovery of ko and As were 54.3% and 65% of its starting materials (DNP-Protein). Sample Ta's recovery was 85% of its DNP-protein. ${\lambda}$-type of Bence Jones Protein was rot investigated its N-terminal amino acid residue by DNP-method, probably it was blocked its N-terminal residue with glutamic acid.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.8 no.1
• /
• pp.45-52
• /
• 2002

Recently cancer, AIDS, chronic sickness have increased according to the elevation of socioeconomic level and fast change of lifestyle. The number of patients receiving terminal care increased fairly because the span of life is extended by development of medicinal technology. Also necessity of hospice and palliative care was risen according to the request of terminal patients that remove pain and keep calm life by interest about quality of life. However architectural plan and type specialization of facility which can correspond team's composition and supplied nursing program are not consisting. This study researches about care environment of hospice facility plan through investigation into terminal patient's special quality. The purpose of this study is to propose fundamental datas of hospice facility for architectural plan through comparative analysis of cases of domestic and outside facilities.