• Journal of Pharmaceutical Investigation
• /
• 제24권3호
• /
• pp.109-113
• /
• 1994

Effects of various formulation factors using $L_8$ orthogonal arrays with the stability of doxorubicin hydrochloride injections(DHls) were investigated. The degradation of DHI may be occured by pH, temperature, light and metal ions. It is known that DHI should be stored on refrigerated condition of $4{\sim}8^{\circ}C$ because of its unstability on the room temperature. The employed factors were sodium chloride as isotonic solution, sodium bisulfite or sodium pyrosulfite as an antioxidant, disodium edetate as a chelating agent, methyl parahydroxybenzoate as a dissolution time shortening agent, and hydrochloric acid or citric acid as a pH adjusting agent at $22^{\circ}C$. From the results of $L_8$ orthogonal arrays, an optimal formula, including sodium chloride, disodium edetate, sodium bisulfite and hydrochloric acid, was obtained and the shelf-life of the formula was determined as 560 days approximately.

• Journal of Biosystems Engineering
• /
• 제43권3호
• /
• pp.211-218
• /
• 2018

Purpose: The present study investigated the nutritional and organoleptic characteristics of two African leafy vegetables (ALVs)-jute mallow (Corchorus olitorius L) and cowpea (Vigna unguiculata)-at various drying temperatures. Methods: The thin-layer drying of cowpea leaves and jute mallow was studied at various temperatures ($40-100^{\circ}C$) in a convective laboratory dryer, and the nutrient profiles of the dried vegetables were determined. The nutrients considered were vitamins B2 and C, and ${\beta}$-carotene. The level of vitamin C was determined by high-performance liquid chromatography (HPLC), whereas the levels of ${\beta}$-carotene and vitamin B2 were determined by titration. Results: ${\beta}$-carotene was the most stable nutrient, whereas vitamin C was the least stable nutrient in both cowpea leaves and jute mallow. The drying parameters-temperature and time-revealed that temperature had the most profound effect on vegetable nutrient stability. Organoleptic tests were carried out on the fresh and dried vegetable; there were no significant differences in preference between the fresh and dried ALVs (95% confidence interval). Conclusions: The present study revealed that the vegetables can be preserved by drying, and the study could be used as a guide for effective drying of those vegetables.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2865-2870
• /
• 2013

Ni-Ag core-shell nanoparticles were synthesized by polyol process and microemulsion technique successfully. In the polyol process, a chemical reduction method for preparing highly dispersed pure nickel and Ag shell formation have been reported. The approach involved the control of reaction temperature and reaction time in presence of organic solvent (ethylene glycol) as a reducing agent for Ag cation with poly(vinyl-pyrrolidone) (PVP. Mw = 40000) as a capping agent. In microemulsion method, the emulsion was prepared by water/cetyltrimetylammonium bromide (CTAB)/cyclohexane. The size of microemulsion droplet was determined by the molar ratio of water to surfactant (${\omega}_o$). The core-shell formation along with the change in structural phase and stability against oxidation at high temperature heat treatments of nanoparticles were investigated by X-ray diffraction and TEM analysis. Under optimum conditions the polyol process gives the Ni-Ag core-shell structures with 13 nm Ni core covered with 3 nm Ag shell, while the microemulsion method gives Ni core diameter of 8 nm with Ag shell of thickness 6 nm. The synthesized Ni-Ag core-shell nanoparticles were stable against oxidation up to $300^{\circ}C$.

• 미생물학회지
• /
• 제26권3호
• /
• pp.207-214
• /
• 1988

A cytosine deaminase from the cell-free extract of an isolate was examined after ethyl alcohol reactionation. The enzyme catalyzed the conversion of 5-fluorocytosine to 5-fluorouracil by the possession of specificity to the substrate. The optimum temperature and storage time on the stability of the enzyme were at below $50^{\circ}C$ and near 2 days in tris-HCl buffer. The maximum activity was also presented ar 9.0 in pH and $45^{\circ}C$ in temperature. The pHs and temperatures for the enzyme activity ranged from 8.5-9.5 and from 40-$50^{\circ}C$, respectively. the presence of $Ag^{+}, Hg^{2+}, Zn^{2+}$ in the reaction mixture resulted in the marked inhibition in the activity, but 1mM of $Fe^{3+}, K^{+}$, or $Na^{+}$ increased the enzyme activity. The enzyme preparation was vot affected by inhibitors used except N-ethylmaleimide of 1 and 10mM, and considerably activated by 1mM of pyrophosphate and 10mM of phosphate.

• 전기화학회지
• /
• 제3권4호
• /
• pp.232-234
• /
• 2000

전기화학적인 방법으로 요산을 정량함에 있어서 전극의 활성을 증가시키기 위하여 초음파를 조사하여 요산의 정량을 시도하였다. 요산의 정량의 최적조건을 조사하기 위하여 초음파의 세기, 시간, 전해질 용액의 pH, 온도 등의 영향을 조사하였고 전극의 안정성에 대해서도 조사하였다. 최적 조건은 $25.0^{\circ}C$, pH 7.0,초음파의 파워 $20W/cm^2$의 조건이었으며 $8.0{\times}10^{-6}\~5.0\times10^{-4}M$의 직선범위를 가졌고, 검출한계는 $6.5\times10^{-6}M$이었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.531-536
• /
• 2004

In-arm type hydropeumatic suspension unit(ISU) is an equipment of armed tracked vehicle to absorb impact load and vibration from the irregular ground. During the operation of ISU, main piston moves forward and backward and oil flowing through damper transmits the external impact load to floating piston. Heat is generated in ISU by the oil pressure drop through the damper orifice and the friction between cylinder wall and two pistons. On the other hand, internal heat dissipatis outside via heat convection. Occurrence of high temperature can deteriorate durability of major components and basic function of ISU. And, it can cause fatal problem in the ISU life time and the sealing performance of piston rings. As well, the spring constant change of nitrogen gas that is caused by the temperature rise exerts the negative effect to the vehicle stability. Therefore, in this paper, we analyze the heat transfer analysis of the entire ISU unit, by finite element method, with the outside flow velocities 8m/s and 10m/s.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.187-199
• /
• 1994

In order to find an effect of structural changes due to variation of addition ratio of anhydride hardener and postcuring herat-treatments upon electrical properties of epoxy composites, the dielectric properties over a frequency range from 30[Hz] to l[MHz] were investigated in the temperature range of 20-180[.deg. C]. From the dielectric properties, the a peaks related with glass-transition phenomena of epoxy network appeared near 130[.deg. C], the conduction loss in high temperature region above 150[.deg. C] due to thermal dissociation of hardener started off with the low frequency side and the .betha. peak concerned with contribution of movable unreacted terminal epoxy groups and curing agents in the glass states concurred with the high-frequency side below 20[.deg. C]. And an effect of an hydride hardener upon structural changes and of postcuring heat treatments upon structural stability in epoxy composites would be explained through the estimation of the distribution of relaxation times and the activation energy for a .alpha. peak according to the WLF equations.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.145-154
• /
• 2006

Each part of drum brake system is loaded by continual mechanical force and thermal force every time of braking, so enough strength and stability are required. Thermal characteristic is one of the important factors in drum brake systems design. This paper presents the thermal performance such as temperature distribution and thermal contact stress of drum brake system considering several braking patterns; 80th heat braking test mode, heat fade braking test mode, general road mode, steep slope road mode and off road mode. Transient heat transfer analysis and Thermo elastic contact analysis is executed to obtain the temperature distribution, and to evaluate thermal stress of drum brake by using ABAQUS/Standard code. This procedure of analysis can effectively be used to improve the quality problem of brake system and to get design guideline of the new product.

• 지구물리
• /
• 제7권4호
• /
• pp.305-311
• /
• 2004

사면 붕괴 및 활동 발생지점을 중점대상으로 보강재의 응력 측정 및 변위 수반여부를 판단하기 위하여 경사계, 변형율계 및 간극수압계 등의 계측기를 설치하였으며, 이로부터 사면의 실시간 건전도 모니터링의 가능성을 보여 주었다. 본 연구에서는 현장계측을 통하여 사면의 거동, 억지말뚝의 효과 및 활동면에서의 응력분포간의 관계를 밝히고자 하였다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.22-26
• /
• 2021

Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation in the organic light emitting diodes (OLED). Of those, a laminated structure of Al₂O₃ and MgO were applied to provide efficient barrier performance for increasing the stability of devices in air. Atomic layer deposition (ALD) method is known as the most promising technology for making the laminated Al₂O₃/MgO and is used to realize a thin film encapsulation technology in organic light-emitting diodes. Atomic layer deposited inorganic films have superior barrier performance and have advantages of excellent uniformity over large scales at relatively low deposition temperatures. In this study, the control system of the MgCP₂ precursor for the atomic layer deposition of MgO was established in order to deposit the MgO layer stably by the injection time of second level and the stable heating temperature. The deposition rate was obtained stably to be from 4 to 10 Å/cycle using the injection pulse times ranging from 3 to 12 sec and a substrate temperature ranging from 80 to 150 ℃.