• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.46-51
• /
• 2004

The surface layer in dredged and reclaimed marine clay is improved by mixing of shallow soils and hardening agents, which is made of cement, containing some other special admixtures. Tests in both laboratory and field settings are performed to investigate the improvement effect and strength properties of cement-stabilized soils. The test results show that the hardening agent sufficiently improves the soil properties of the surface layer, while increasing the load-carrying capacity. The strength of cement-stabilized soils depends, primarily, on water-to-cement ratio and curing temperature. That is, the higher curing temperature and the longer curing time, the higher the strength in cement-stabilized soils. The high ratio of water-ta-cement results in a lower strength.

• Journal of Aerospace System Engineering
• /
• v.12 no.5
• /
• pp.1-7
• /
• 2018

In this study, we proposed a high frequency induction hardening analysis method based on electromagnetic-thermal co-simulation. In the high frequency induction heating analysis, the results of the finite element analysis (FEA) (considering the change of the material property and the cooling factor according to the temperature) and those of the high frequency induction hardening experiment (using the S45C specimen) were compared. The hardness of the S45C specimens was measured using the micro Vickers hardness test to determine the depth of hardening. The measurement results were then compared with the results of FEA. The result of high frequency induction heating analysis showed that the temperature was more than $750^{\circ}C$, which is the A2 transformation point of S45C, while the temperature during quenching was below $200^{\circ}C$. The results showed that the difference of the depth of hardening between the FEA and the experiment is 0.2mm.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.55-63
• /
• 2011

The convex printing plate in particular securities is classified three physical properties. The main ingredient(component)of photosensitive plastic is composed of thermosetting polyamide. After being hardened specimen at $80^{\circ}C$ is shown to resist highly, the Glass Transition Temperatures of photosensitive plastic are $85^{\circ}C$. When hardened plate has reached at $80^{\circ}C$, abrasion loss is minimized. the cause is considered it is more effective in hardening when the temperature of photosensitive plastic is $80^{\circ}C$-the vitrification temperature of those. The hardness and the durability of the convex printing plate in particular securities are affected to the hardening treatment temperature. And the resolution of original drawing has being better when the durability is superior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.182-189
• /
• 2007

This paper is concerned with the empirical flow stress constitutive equation of steel sheets for an auto-body with the variation of temperature and strain rate. In order to represent the strain rate and temperature dependent behavior of the flow stress at the intermediate strain rates accurately, an empirical hardening equation is suggested by modifying the well-known Khan-Huang-Liang model. The temperature and strain rate dependent sensitivity of the flow stress at the intermediate strain rate is considered in the hardening equation by coupling the strain, the strain rate and the temperature. The hardening equation suggested gives good correlation with experimental results at various intermediate strain rates and temperatures. In order to verify the effectiveness and accuracy of the suggested model quantitatively, the standard deviation of the fitted result from the experimental one is compared with those of the other two well-known empirical constitutive models such as the Johnson-Cook and the Khan-Huang-Liang models. The comparison demonstrates that the suggested model gives relatively well description of experimental results at various strain rates and temperatures.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.199-205
• /
• 2013

The mechanical properties and microstructures of aluminum-matrix composites fabricated by the dispersion of fine alumina particles less than $20{\mu}m$ in size into 6061 aluminum alloys are investigated in this study. In the as-quenched state, the yield stress of the composite is 40~85 MPa higher than that of the 6061 alloy. This difference is attributed to the high density of dislocations within the matrix introduced due to the difference in the thermal expansion coefficients between the matrix and the reinforcement. The difference in the yield stress between the composite and the 6061 alloy decreases with the aging time and the age-hardening curves of both materials show a similar trend. At room temperature, the strain-hardening rate of the composite is higher than that of the 6061 alloy, most likely because the distribution of reinforcements enhances the dislocation density during deformation. Both the yield stress and the strain-hardening rate of the T6-treated composite decrease as the testing temperature increases, and the rate of decrease is faster in the composite than in the 6061 alloy. Under creep conditions, the stress exponents of the T6-treated composite vary from 8.3 at 473 K to 4.8 at 623 K. These exponents are larger than those of the 6061 matrix alloy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.61-66
• /
• 1989

Plants were exposed to different sub-optimal growth temperature regimes for hardening or sprayed with abscisic acid (ABA) before being placed at $10^{\circ}C$ for three days. Comparisons were made with non-treated plants for plant survival, photosynthetic activities and fatty acids composition of phospholipids. The level of endogenous ABA of the hardened seedlings was compared with that in control and ABA sprayed-seedlings. The results of the above experiment were summarized as follows: 1. Compared to non-treated plants, the hardening and ABA treatment resulted in higher plant survival rate and better seedling growth following earlier transplanting. The low temperature hardening which gradually increased the duration of the low temperature treatment at 2-day intervals was more effective than the controled temperature hardening which gradually decreased the temperature from $25^{\circ}C$ to $20^{\circ}C$ and $15^{\circ}C$. 2. The photosynthetic activities of rice leaves after 3-day exposure to $10^{\circ}C$ were higher in hardened and ABA sprayed seedlings than in non-treated plants. The root activities after low temperature treatment were also higher in hardened and ABA sprayed seedlings than in control. 3. Fatty acids of phospholipids in rice plants such as stearic acid and oleic acid were decreased and the highly unsaturated fatty acids, linoleic acid and lenolenic acid were increased by hardening or ABA treatments. It is assumed that the increase of cold tolerance in these plants was due to the higher ratio of unsaturated to saturated fatty acids. Respectively, the ratio was 1.86, 1.97 and 1.80 in plants given controled temperature hardening, the low temperature hardening and ABA treatments. While in control plants, it was 1.17. 4. ABA content in rice seedling given the low temperature hardening treatment was 67.2 ng/g F.W which was approximately twice that of non-treated control, which was 33.9 ng/f F. W., in contrast, the ABA content of the ABA treated seedlings was 91.7 ng/g F. W.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.3
• /
• pp.73-84
• /
• 2011

This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT ($-40^{\circ}C$), RT, and HT ($200^{\circ}C$)) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.33-37
• /
• 1998

The hardening test of gelatin with 2,4-dichloro-6-hydroxy-1,3,5-triazine mono sodium salt was studied at pH 5, 7, 8 and about increasing temperature, respectively. The hardener was prepared by the reaction of cyanuric chloride with sodium hydroxide, disodium hydrogenphosphate-12-water and trisodium phosphate-12-water in the presence of water. The product was identified by elemental analyzer. IR spectrophotometer. Novel hardener can be used in photographic emulsion and showed very good hardening effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.266-267
• /
• 2014

In order to develop concrete generating compressive strength of 10MPa~15MPa aging for 6hours in the room temperature curing, Hardening accelerator containing Ca²⁺ mixed with rapid hardening portland cement containing C₃S in quantity. The result was that the more addictive contents of Hardening accelerator is, the more greatly early compressive strength was improved. That's because the composition of Ca(OH)₂ was mass-produced at early-ages.

• Journal of Biomedical Engineering Research
• /
• v.17 no.2
• /
• pp.247-254
• /
• 1996

The relationship between the isothermal age-hardening behavior and the phase transformation in the commercial dental Au-Ag-Cu-Pd alloy was investigated Age-hardening was mostly attributed to the lattice distortions of the supersaturated w phase resulting from the transformation to the metastable phasel which were more distinct at lower aging temperature. The lattice distortions resulting from the transformation of the metastable phases to the equilibrium phases also made a contribution to the age-hardening.