• 환경생물
• /
• 제39권4호
• /
• pp.536-541
• /
• 2021

Pantala flavescens is a dominant Odonata species in the rice fields in Korea. To determine the effects of different temperatures on its larval growth and emergence, field and laboratory experiments were conducted. Larval growth was also monitored in mono-cropping and double-cropping rice fields. The growth of larvae was monitored every week by measuring the head width. In the field experiment, no difference was found in larval growth and emergence between the control temperature and +1.9℃ of the control temperature. The larval growth was greater at 23℃ than at 20℃ laboratory temperatures, and no emergence was recorded at either temperature after eight weeks of monitoring. There was a quadratic relationship between larval growth and temperature in an incubator at five temperature regimes of 15, 20, 25, 30, and 35℃. Midseason water drainage caused the extinction of the existing individuals and newly hatched larvae dominated after re-watering in the rice fields. Larval size was greater in double-cropping fields than in mono-cropping fields in late July but the tendency was reversed in early August. The results of this study suggest that temperature warming will directly promote the larval growth of P. flavescens and indirectly influence seasonal growth via changes in water management in rice fields.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.531-542
• /
• 2007

Simultaneous measurement technique for temperature and velocity fields near a heated solid body has been constructed. The measurement system consists of a 3-late CCD color camera, a color image grabber, a 1ighting system, a host computer and a software for the whole quantification process. Thermo Chromic Liquid Crystals (TCLC) was used as temperature sensors. A neural network was used to get a calibration curve between the temperature and the color change of the TCLC in order to enhance the dynamic range of temperature measurement. The velocity field measurement was attained by the use of the fray-level images taken for the flow field, and by introducing the cross-correlation technique. The temperature and the velocity fields of the forced and the natural convective flows neat the surface of a cartridge heater were measured simultaneously with the constructed measurement system.

• 천문학회지
• /
• 제37권5호
• /
• pp.547-551
• /
• 2004

We showed that magnetic fields are generated in the plasma which have the temperature inhomogeneities. The mechanism is the same as the Weibel instability because the velocity distribution functions are at non-equilibrium and anisotropic under the temperature gradients. The growth timescale is much shorter than the dynamical time of structure formation. The coherence length of magnetic fields at the saturated time is much shorter than kpc scale and then, at nonlinear phase, become longer by inverse-cascade process. We report the application of our results to clusters of galaxies, not including hydrodynamic effects.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.716-727
• /
• 2005

Comprehensive measurements for velocity and temperature fields have been conducted. A Micro PIV 2-color LIF system have been setup to measure the buoyancy driven fields in a 1-mm heated channel with low Grashof-Prandtl numbers [$86]. Fluorescence microscopy is combined with an MPIV system to obtain enough intensity images and clear pictures from nano-scale fluorescence particles. The spatial resolution of the Micro PIV system is $75{\mu}m\;by\;67{\mu}m$ and error due to Brownian motion is estimated $1.05\%$. Temperature measurements have achieved the $4.7\;{\mu}m$ spatial resolution with relatively large data uncertainties the present experiment. The measurement uncertainties have been decreased down to less than ${\pm}1.0^{\circ}C$ when measurement resolution is equivalent to $76\;{\mu}m$. Measured velocity and temperature fields will be compared with numerical results to examine the feasibility of development as a diagnostic technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.513-516
• /
• 2002

The flow structure and heat transfer characteristics of a turbulent buoyant jet were investigated experimentally. The instantaneous temperature and velocity fields in the near field were measured using a two-frame PIV and PLIF techniques. A thin light sheet illuminated a two-dimensional cross section of the buoyant jet in which Rhodamine B was added as a fluorescent dye. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured by a CCD camera after passing an optical filter. By ensemble averaging the instantaneous temperature and velocity fields, the mean temperature and velocity fields as well as the spatial distributions of turbulent statistics were obtained. The results show the flow structure and convective heat transfer of the developing shear layer in the near field.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.12-24
• /
• 1999

A computer program has been developed for analyzing the two-dimensional, unsteady conservation equations for transport phenomena in the molten region of twin-roll continuous casting in order to predict the turbulent velocity, temperature fields, and solidification process of the molten steel. The energy equation of the cooling roll is solved simultaneously with the conservation equations of molten steel in order to consider heat transfer through the cooling roll. The results show the velocity, temperature and solidification pattern in the molten region with roll temperature as a function of time. The results for velocity and temperature fields with solidification are compared with those without solidification, giving different thermofluid characteristics in the molten region. We also investigated the effects of revolutional speed of roll, superheat and nozzle geometry on the turbulent flow, temperature and solidification in the molten steel and temperature fields in the cooling roll.

• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.31-38
• /
• 2006

Using a Rheometries Dynamic Analyzer (RDA II), the dynamic viscoelastic properties of a semi-solid ointment base (vaseline) in large amplitude oscillatory shear flow fields were measured over a temperature range of $25{\sim}45^{\circ}C$ and the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a wide range of angular frequencies. In this article, the nonlinear viscoelastic behavior was reported from the experimentally obtained data and the effect of temperature on this behavior was discussed in detail. In addition, the angular frequency and temperature dependencies of a linear viscoelastic behavior were explained. Finally, the applicability of a time-temperature superposition principle originally developed for polymeric materials was examined using a shift factor. Main results obtained from this study can be summarized as follows : (1) At very small strain amplitude region, vaseline shows a linear viscoelastic behavior independent of the imposed deformation magnitudes. Above a critical strain amplitude $({\gamma}_{0}=0.1{\sim}0.2%)$, however, vaseline exhibits a nonlinear viscoelastic behavior ; indicating that both the storage modulus and dynamic viscosity are sharply decreased with increasing deformation magnitude. (2) In large amplitude oscillatory shear flow fields, an elastic behavior (storage modulus) has a stronger strain amplitude dependence and begins to show a nonlinear behavior at a smaller strain amplitude region than does a viscous behavior (dynamic viscosity). (3) In small amplitude oscillatory shear flow fields, the storage modulus as well as the loss modulus are continuously increased as an increase in angular frequency and an elastic nature is always superior to a viscous behavior over a wide range of angular frequencies. (4) A time-temperature superposition principle can successfully be applicable to vaseline. This finding allows us to estimate the dynamic viscoelastic behavior of vaseline over an extraordinarily extended range (11 decades) of angular frequencies inaccessible from the experimentally measured range (4 decades).

• 한국조경학회지
• /
• 제37권1호
• /
• pp.18-27
• /
• 2009

본 연구는 도시미기후 측면에서 냉섬 역할을 하는 논경작지의 대규모 택지개발로 인한 도시기온 변화량를 분석하여 논경작지 보존을 위한 기초자료를 제공하고 도시온도 상승을 줄일 수 있는 방안을 제시하고자 하였다. 인천시 부평구와 부천시의 개발 전 후 토지피복 변화를 분석하기 위해 1989년 5월 17일과 2000년 5월 7일 위성영상을 산림, 초지 및 식재지, 논경작지, 나지, 시가화 지역을 구분하여 분석한 결과, 기존 인천시 부평구와 부천시 중앙에 넓게 분포하고 있던 논경작지 대부분이 신도시 건설로 인해 시가화 지역과 개발 중인 나지로 변한 것으로 분석되었다. 토지피복변화 유형별 지표면 온도 변화 현황 분석 결과, 지표면 온도가 높아진 주요 유형은 논경작지에서 나지로 변화된 유형($+1.4939^{\circ}C$), 논경작지에서 시가화 지역으로 변화된 유형($0.9356^{\circ}C$)이었다. 논경작지 토지이용 변화에 따른 온도 변화 영향요인을 분석하기 위해 논경작지 변화지역을 대상으로 블록별 평균 지표면 온도차를 분석한 결과, 1989년 세부 연구대상지는 논경작지였기 때문에 $19{\sim}20^{\circ}C$ 사이의 균일한 온도분포를 나타낸 반면, 시가화 지역으로 변한 2000년 블록별 지표면 온도는 $19.1{\sim}23.9^{\circ}C$로 온도편차가 크고 분포가 다양하게 나타나고 있었다. 논경작지 토지이용 변화에 따른 도시기온 변화 원인 분석을 위해 지표면 온도 변화량과 도시기온 변화 영향요인간 상관관계를 분석한 결과, 녹지율 상관계수는 -0.662로 강한 음의 상관관계를 보였으며, 건폐율, 불투수포장율, 용적율은 지표면 온도 변화량과 상관계수가 +0.231, +0.226, +0.123으로 통계적 유의성이 인정되지 않았다. 논경작지 토지이용 변화에 따른 지표면 온도 변화모형을 구축하기 위해 녹지율을 독립변수로 지표면 온도 변화량을 종속변수로 한 회귀분석을 실시한 결과, 기존 논경작지에서 시가화 지역으로 변화할 경우 녹지율 및 불투수포장율이 0%라 가정할 때 $+3.889^{\circ}C$의 온도 상승이 예상되며 녹지율이 10% 증가할 때마다 $+3.889^{\circ}C$에서 $-0.430^{\circ}C$ 만큼 온도저감 효과가 있는 것으로 분석되었다.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.595-610
• /
• 2003

The statistical indexes such as RMSE (Root Mean Square Error), Mean Bias error, and IOA (Index of agreement) are used to evaluate 3 Dimensional wind and temperature fields predicted by operational meteorological model RAMS (Regional Atmospheric Meteorological System) implemented in CARIS (Chemical Accident Response Information System) for the dispersion forecast of hazardous chemicals in case of the chemical accidents in Korea. The operational atmospheric model, RAMS in CARIS are designed to use GDAPS, GTS, and AWS meteorological data obtained from KMA (Korean Meteorological Administration) for the generation of 3-dimensional initial meteorological fields. The predicted meteorological variables such as wind speed, wind direction, temperature, and precipitation amount, during 19 ∼ 23, August 2002, are extracted at the nearest grid point to the meteorological monitoring sites, and validated against the observations located over the Korean peninsula. The results show that Mean bias and Root Mean Square Error are 0.9 (m/s), 1.85 (m/s) for wind speed at 10 m above the ground, respectively, and 1.45 ($^{\circ}C$), 2.82 ($^{\circ}C$) for surface temperature. Of particular interest is the distribution of forecasting error predicted by RAMS with respect to the altitude; relatively smaller error is found in the near-surface atmosphere for wind and temperature fields, while it grows larger as the altitude increases. Overall, some of the overpredictions in comparisons with the observations are detected for wind and temperature fields, whereas relatively small errors are found in the near-surface atmosphere. This discrepancies are partly attributed to the oversimplified spacing of soil, soil contents and initial temperature fields, suggesting some improvement could probably be gained if the sub-grid scale nature of moisture and temperature fields was taken into account. However, IOA values for the wind field (0.62) as well as temperature field (0.78) is greater than the 'good' value criteria (> 0.5) implied by other studies. The good value of IOA along with relatively small wind field error in the near surface atmosphere implies that, on the basis of current meteorological data for initial fields, RAMS has good potentials to be used as a operational meteorological model in predicting the urban or local scale 3-dimensional wind fields for the dispersion forecast in association with hazardous chemical releases in Korea.

• 오토저널
• /
• 제12권3호
• /
• pp.41-52
• /
• 1990

In this study are determined the unsteady temperature and thermal stress fields for a domestic 4-cylinder, 4-cycle gasoline engine cylinder head by the three-dimensional finite element method. A representative part of the cylinder head is modelled as a combination of hexahedron isoparametric elements, and the time-dependent temperature and the heat transfer coefficient of the gas are imposed as the thermal boundary conditions for the engine speeds of 500 rpm and 2000 rpm. The obtained results, which are represented graphically, indicate that the amplitudes of temperature fluctuation during a cycle are about 10.deg. C and 3.deg. C respectively on the surface of combustion chamber, and the maximum temperature fields occur at 30.deg. , 10.deg. respectively before the initiation of the exhaust stroke. Thermal stress fields due to non-uniform temperature distributions show that compressive stress is much larger than tensile stress throughout a cycle. It is also found that the compressive stress varies with substantial amplitude between the exhaust port and ignition plug hole, and the high tensile stress with small fluctuation occurs between exhaust port and the adjacent head bolt hole.