• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.611-615
• /
• 1994

In this paper, the sensitivity, linearity and temperature drift characteristics of various capacitive force sensors are evaluated and compared using new experimental methods. In particular, two designs were employed to reduce temperature drift. Both types of sensor use high-sensitivity Al coated PET film, and their externals are miniaturized. The first has a layered design consisting of two dielectric substances with different temperature characteristics. The prototype of this design had a temperature drift of only 0.1% of the sensor's capacity in the 20-80.deg. C range. The second type uses both a dummy sensor ind an active sensor with the same characteristics. The temperature drift of the prototype was one-fifth the temperature drift of a single sensor.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1254-1262
• /
• 2014

Magneto-electric encoders have been widely used in industry and military applications because of their good shock resistance, small volume, and convenient data processing. However, the characteristics of a magneto-electric encoder's signal generator and hall sensor changes minimally with temperature variation. These changes cause an angle drift. The main purpose of this study is to construct the compensation system of a neural network and constantly update weight coefficients of temperature correction by finite iteration calculation so that the angle value modified can approach the angle value at the target temperature. This approach is used in adaptive correction of the angle value.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제17권5호
• /
• pp.927-932
• /
• 2022

Instrument drift is caused by the passage of time, environmental changes, normal wear and tear, debris buildup, sudden shock, vibrations, electromagnetic fields, and improper use. Since it is inappropriate to directly determine the change of the output value as drift during the limited test period, a new algorithm that reflects both zero drift and span drift by giving changes over time to the calibration method of the instrument was proposed. The temperature drift was calculated to be 0.49% for about 60 minutes at 1-minute intervals in the nine-step constant temperature environment through the warming and cooling process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.137-140
• /
• 2003

Cu+ ions drift diffusion in different dielectric materials is evaluated. The diffusion is investigated by measuring shift in the flatband voltage of capacitance/voltage measurements on Cu gate capacitors after bias temperature stressing. At a field of 1.lMV/cm and temperature $200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$ for 1H, 2H, 5H. The Cu+ ions drift rate of polyimide$(2.8{\leq}k{\leq}3.2)$ is considerably lower than thermal oxide. Also Cu+ drift rate of polyimide is similar to PECVD oxide. But, polyimide film is even more resistant to Cu drift diffusion and thermal effect than Thermal oxide, PECVD oxide: This results got a comparative reference. The important conclusion is that polyimide film is strongly dielectric material by thermal effect and Cu drift diffusion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제14권11호
• /
• pp.912-916
• /
• 2001

Fluxmeter is a measuring instrument the magnetic flux intensity by means of an integration of the voltage induced to a search coil to unit time. It also is required to a precise integrator since the voltage induced to a search coil has a differential value of the flux ${\Phi}$ to unit time. In this study, a bias current which is a main problem of the integrator in a drift troublesome depending on the temperature of a FET is investigated. We have confirmed that the temperature dependence of both the bias current of a integrator using the FET and the reversal saturated current of the minor carrier in a P-N junction of a semiconductor were the same. The property of a commercial integrator goes rapidly down with increasing temperature. The bias current of a FET is increased twice as much with 10$^{\circ}C$ increment. As a result, the low drift integrator could be developed by setting the lower temperature up with a pottier device.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제15권2호
• /
• pp.19-21
• /
• 1978

The electrical drift mobility of charge carrier of Cholesteryl Benzoate was measured by Polarity inversion method in the temperature range 140~ 185$^{\circ}C$. with a view to revealing the mechanism of charge carrier transport. The electrical drift mobility of charge carrier of that increased from 2.5$\times$10-7$\textrm{cm}^2$/V.sec to 2.0$\times$10-6$\textrm{cm}^2$/v.sec as the temperature increased. As a result of the experiment, the mechanism of current transport is believed to be ionic mechanism.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.144-147
• /
• 2003

Cu+ ions drift diffusion in formal oxide film and SiOCH film for interlayer dielectric is evaluated. The diffusion is investigated by measuring shift in the flatband voltage of capacitance/voltage measurements on Cu gate capacitors after bias temperature stressing. At a field of 0.2MV/cm and temperature $200^{\circ}C,\;300^{\circ}C,\;400^{\circ}C,\;500^{\circ}C$ for 10min, 30min, 60min. The Cu+ ions drift rate of $SiOCH(k=2.85{\pm}0.03)$ film is considerable lower than termal oxide. As a result of the experiment, SiOCH film is higher than Thermal oxide film for Cu+ drift diffusion resistance. The important conclusion is that SiOCH film will solve a causing reliability problems aganist Cu+ drift diffuion in dielectric materials.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제35권3호
• /
• pp.237-241
• /
• 1999

It was investigated that the condition of fishing ground gave what kind of effect school type in relation to the property for the target school after the vertical temperature profile and school type were observed when tuna purse seiner for tuna purse seine was operated in the western pacific Ocean around the equator between December 12, 1993 and January 26, 1994. The results are as follows;1. This study divided fish schools associated with drift objects, a one targeted-operation, and the pelagic migrating fish schools that are another one for the property. The total of 23 operations were complected including 6 that targeted fish schools associated with drift objects and 17 that targeted pelagic migrating fish schools. It was known that the main operation was conducted on pelagic migrating fish school.2. Average and standard deviation of the depth of the surface mixing layer was 86.0m and 13.8m for fish schools associated with drift objects. 61.6m and 13.0m for pelagic migrating fish schools, respectively. The average depth of the surface mixing layer of the pelagic migrating fish schools was lower when compared to the fish schools associated with drift objects however the concentration of standard deviation was higher than those fish schools associated with drifted objects. Accordingly, it was assumed that the effect of vertical temperature profile for pelagic migrating fish school was higher than the fish schools associated with drift objects.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.116-119
• /
• 2010

Adsorption structures of the self-assembled thin films of $\alpha$-cyano-4-hydroxycinnamic acid (CHCA) anchoring on $TiO_2$ surfaces have been studied by using temperature-dependent diffuse reflectance infrared Fourier-transform (DRIFT) spectroscopy. From the presence of the strong $\nu(COO^-)$ band at ~1390 $cm^{-1}$ along with the disappearance of the OH bands in the carboxylic acid group in the DRIFT spectra at room temperature, CHCA appeared to adsorb onto $TiO_2$ surfaces as a carboxylate form. The absence of the out-of-plane benzene ring modes of CHCA in the DRIFT spectra suggests a rather vertical orientation of CHCA on $TiO_2$. Above ~220$ ^{\circ}C$, CHCA seemed to start to thermally degrade on $TiO_2$ surfaces referring from the disappearance of most vibrational modes in the DRIFT spectra, whereas the $\nu$(C ≡ N) bands were found to remain relatively conspicuous as the temperature increased even up to ~460$^{\circ}C$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제42권2호
• /
• pp.78-85
• /
• 2006

A survey on the fishing gear for octopus drift-line fishing was done in Gangwon-do, Sacheon, Gyeongnam and Hokkaido, Japan, while a survey on the environments of fishing grounds used data from January to August from the Korea east coast farming forecast system of Donghae Fisheries Research and Development Institute. The present situation of fishing was examined with boats engaging in drift-line fishing from March to August in the coastal waters along Gangneung. The fishing tackle for octopus drift-line fishing was made manually, and the size, shape, and weight of the hook and number of shooting used vary according to the fishing time and region. Lead is used as the material for sinkers. As bait, pork fat with skin is mostly used in Gangwon-do. The temperature of the bottom water layer in the coastal fishing ground of Gangneung from April to June ranges from $3.2-12.4^{\circ}C$, which is the optimal temperature for octopuses. During July and August, the temperature ranges from $5.0-20.6^{\circ}C$. The maximum difference between day and night temperatures reached up to $9.2^{\circ}C$. Salinity is generally stable at $33.2-35.324.6%_{\circ}$, which does not affect the inhabitation of octopuses. The octopus catch reached its peak from May to July, while most octopuses weighed less than 1 kg (76.7%). The results show that it is effective to carry out octopus drift-line fishing up to a depth of 40 meters; and that the maximum number of octopuses per line is obtained with an operation time of six hours.