A Basic Study on the Low Drift Flux Meter by Using a Peltier Device

펠티어 소자를 사용한 Low Drift Flux Meter의 기초연구

  • 김철한 (동아대학교 전기전자컴퓨터공학부) ;
  • 허진 (동아대학교 전기전자컴퓨터공학부) ;
  • 신광호 (경성대학교 정보과학부) ;
  • 사공건 (동아대학교 전기전자컴퓨터공학부)
  • Published : 2001.11.01

Abstract

Fluxmeter is a measuring instrument the magnetic flux intensity by means of an integration of the voltage induced to a search coil to unit time. It also is required to a precise integrator since the voltage induced to a search coil has a differential value of the flux ${\Phi}$ to unit time. In this study, a bias current which is a main problem of the integrator in a drift troublesome depending on the temperature of a FET is investigated. We have confirmed that the temperature dependence of both the bias current of a integrator using the FET and the reversal saturated current of the minor carrier in a P-N junction of a semiconductor were the same. The property of a commercial integrator goes rapidly down with increasing temperature. The bias current of a FET is increased twice as much with 10$^{\circ}C$ increment. As a result, the low drift integrator could be developed by setting the lower temperature up with a pottier device.

Keywords

References

  1. Electromagnetic Fields Ronald K. Wangsness
  2. Annual Book of ASTM Standards v.3 no.4 ASTM
  3. Principles of Materials Science and Engineering William F. Smith
  4. Introduction to Magnetic Materials B.D. Cullity
  5. Electronic Principles Malvino
  6. Micromachined Transducer Source Book Gregory T.A. Kovacs
  7. Electronics Engineer's H/B F. Christiansen
  8. The Art of Electronics Horowitz&Hill