• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.109-114
• /
• 2015

A method to compensate a bias hysteresis error of the ring laser gyro using the rate of temperature is proposed in this paper. Until now, we generally have measured and compensated the error of gyro and accelerometer using the temperature. However, we utilize the measured values of the temperature dependent error elements on the temperature rate in navigation system level. We show through experiments that the proposed method can improve the navigation performance and be very effective.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.141-149
• /
• 2019

This study analyzed upper-air temperatures in order to make temperature conditions for weapon system operating in Korean Peninsula. One of important tasks of environmental analysis is to set-up suitable temperature conditions for successful development of weapon system. Many weapon system developers are setting air temperature conditions based on the MIL-STD-810G. However, for weapons systems that are used only in the upper-air of the Korean Peninsula, the air temperature conditions recommended by MIL-STD-810G are often not suitable. To establish the air temperature conditions for upper-air in the Korean Peninsula, the method of Percentage of Occurrence should has be built up as method of temperature analysis. Upper-air climate data of the Korea Peninsulas over the past decade is also analyzed based on this method. The study suggest upper-air temperature conditions for weapons systems that are operated only in the Korean peninsula.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.215-223
• /
• 2019

A high temperature adhesive development which is crosslinked in low temperature is necessary for aerospace application because of thermal expansion mismatches of various substrates. For this purpose, we have designed and fabricated several formulations with high temperature epoxy resins, crosslinkers and additives considering various working conditions and high service temperature. As a result, some formulations showed higher adhesive strengths than Hysol EA 9394/C2 which is widely used for aerospace applications. We also have studied and summarized the mechanical properties of the best development adhesive in both room and high temperatures.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.115-121
• /
• 2008

The present study performed low-pressure steam curing with mortar specimens in order to examine the temperature profile and strength development of steam curing in high-strength specimens of 100MPa. In addition, as a basic research to utilize PC products, we examined the effects of curing temperature and time in steam curing cycle on strength development resulting from the hydration of cement within the range of high strength by changing four factors affecting the quality of PC displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature - in various patterns, and analyzed the optimal strength development characteristic based on the relation between temperature profile and strength development. With regard to the high-temperature curing characteristic of PC, we performed an experiment on the strength characteristic according to the temperature profile of high-strength mortar, and from the results of the experiment according to curing characteristic, displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature, we drew conclusions as follows.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.676-683
• /
• 2000

For high quality storage of agricultural products, temperature, humidity and gas conditions in a storage house should be controlled properly. But most of the low temperature storage house is depending on temperature control. This study aimed to develop an automatic control system for low temperature storage house that can control storage conditions such as temperature, humidity and $CO_2$ gas concentration. The developed system alarms the user, by telephone or beeper, when abnormal condition has occurred. The farmer can also monitor the inside condition of warehouse in his residence, by Internet. From the results of the performance test, the temperature and relative humidity in the warehouse is controlled within the range of ${\pm}0.5^{circ}C$ and ${\pm}2%$, respectively.

• 한국작물학회지
• /
• 제64권3호
• /
• pp.213-224
• /
• 2019

There is an increasing frequency in the occurrence of abnormal weather phenomena such as sharp increases and decreases in temperature. Under these weather conditions, the heading time of rice changes unexpectedly, which poses problems in agriculture. Therefore, we investigated the effect of temperature on the heading response at different growth stages in rice. During the period from transplanting to heading, the plants were subjected to different temperature treatments, each for a 9-day period, to observe the heading response. For the heading date analysis, "heading date" was defined as the number of days from transplanting to the appearance of the first spikelet. We found that the influence of temperature increased in the order of rooting stage, followed by meiosis, early tillering, spikelet differentiation, and panicle initiation stage in all ecological types and cultivars. In particular, unlike the results reported previously, the effect of temperature on heading during the photo-sensitive period was very small. Meanwhile, the influence of temperature on vegetative growth response at different growth stages was not consistent with heading response. These results can be used as basic data for predicting the variation in heading date owing to temperature variation at each growth stage. In addition, we propose that the concept of day length should be included in determining the influence of temperature on the photo-sensitive period.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제31권2호
• /
• pp.35-39
• /
• 2015

The developmental responses of insects to temperature are important considerations in gaining a better understanding of their ecology and life histories. Temperature-dependent phenology models permit examination of the effects of temperature on the geographical distributions, population dynamics, and management of insects. Measurements of insect developmental and survival responses to temperature pose practical challenges that depend on the chosen modality, variability among individuals, and high mortality rates near the lower and upper threshold temperatures. Different temperature levels can significantly affect larval development of Eurema hecabe. The development of E. hecabe reared on leaves of Lespedeza cuneata was investigated at three temperature regimes (20, 25, and 30℃), a relative humidity of 60%, and a light:dark photoperiod of 14:10 h. The developmental time from larva to adult was 34.3, 20.6, and 17.9 d at temperatures of 20, 25, and 30℃, respectively. Pupal rate was 47.6%, 47.6%, and 61.9% at temperatures of 20, 25, and 30℃, respectively. The developmental threshold temperature estimated from larva to pupae was 8.1℃ with 381.7 degree-days. There is an increasing need for a standardized manual for rearing this butterfly species based on adequate knowledge of its ecology.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.17-25
• /
• 1999

To elucidate the effect of elevated sublethal temperature ($33\pm1^{\circ}C$) on polyamine metabolism and oogenesis, we investigated alterations in the major polyamines and ornithine decarboxylase (ODC) and arginine decarboxylase (ADC), and ovarian development during the pupal-adult development of the tobacco budworm, Helicoverpa assulta. Ovaries ODC activity under the elevated sublethal temperature ($33\pm1^{\circ}C$) were lower than those of the optimal rearing temperature ($25\pm1^{\circ}C$). whereas ovarian ADC activity was consistently higher than the optimal rearing temperature ($25\pm1^{\circ}C$). When the gonads were exposed to the higher temperature, ovarian putrescine showed somewhat suppressed levels throughout development, indicating a relatively high correlationship with the alteration aspects in ODC or ADC activity under elevated sublethal temperature. A somewhat precocious ovary was observed in an early stage of development at $33\pm1^{\circ}C$, but cellular abnormalities occurred in this ovary. The ovary developed under elevated sublethal temperature was observed the inhibitional effect of polyamine metabolism and the abnormal development of ovariole, which seem to be related to the sterility.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.500-504
• /
• 2017

In this paper, we developed a temperature measurement system based on an infrared temperature imaging module for thermal safety verification of a plasma skin treatment device (PSTD). We tested a pilot product of the low-temperature PSTD using the system, and the temperature increase of each plasma torch was well-monitored in real-time. Additionally, through the approximation of the temperature increase of the plasma torches, a certain limitation of the plasma treatment time on skin was established with the International Electrotechnical Commission (IEC) guideline. We determined an appropriate plasma treatment time ($T_{Safe}$ < 24 minutes) using the configured temperature measurement system. We believe that the temperature measurement system has a potential to be employed for testing thermal safety and suitability of various medical devices and industrial instruments.

• 한국식물병리학회지
• /
• 제10권1호
• /
• pp.34-38
• /
• 1994

Effect of temperature, relative humidity (RH) and free water period on anthracnose development by Colletotrichum gloeosporioides was examined on red pepper fruits. Mycelial growth of C. gloeosporioides was best at 28$^{\circ}C$, but greatly retarded at 32$^{\circ}C$. Minimum inoculum density required for lesion development varied with isolates, but was mostly above 1.0$\times$105 conidia/ml. Optimum temperature for lesion development on fruits was 31$^{\circ}C$. Percentage of lesion development was decreased as incubation temperature decreased. similar trend of temperature response was observed for acervulus formation on the developed lesions. Acervuli were not developed on the lesion as low as at 19$^{\circ}C$. Lesion development and acervuli formation tended to increase as increasing RH, but were greatly inhibited at the RH lower than 88%. More than 2 hours of free water period after inoculation were required for lesion development. Lesion development was increased as free water period increased. This study indicates that anthracnose development by C. gloeosporioides favors the conditions of high temperature above 28$^{\circ}C$, high humidity above 90% RH, and requires free water period longer than 2 hours.