• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.2
• /
• pp.69-74
• /
• 2010

AlN thin films were deposited by using a two-facing-targets type sputtering system (TFTS), and their deposition characteristics, microstructure and texture were investigated. Total gas pressure was kept constant at 0.4 Pa and the partial pressures of nitrogen, $PN_2$ (($N_2$ pressure)/($Ar+N_2$ pressure)) varied from 0 to 0.4 Pa. The texture of the film cross-sections and surface morphology were observed by field emission scanning electron microscope (FE-SEM). The crystallographic orientation of the films were analyzed by X-ray diffraction (XRD). Deposition of AlN film depends on $N_2$ partial pressure. The best preferred oriented AlN thin films can be deposited at a nitrogen partial pressure of $PN_2$ = 0.52. As-deposited AlN films show preferred orientation and columnar structure, and the grAlN size of AlN films increases with increasing sputtering current.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.50-56
• /
• 2005

The effect of wood material type on biocide retention and distribution during supercritical fluid impregnation was assessed using three different wood types including solid wood, plywood and oriented strand board (OSB). The result revealed that biocide treatability differed with structural composition and permeability of the various materials. Low treatability of plywood might be attributed to interferences of glue line limiting fluid movement. OSB samples showed higher biocide retentions, resulting from the presence of interconnecting gaps permitting more open flow.

• Carbon letters
• /
• v.13 no.4
• /
• pp.226-229
• /
• 2012

Polyacetylene (PA) films with vertically aligned fibril morphology were synthesized in homeotropic nematic liquid crystal (N-LC) solvent by using a magnetic field of 5 Tesla as an external perturbation. Scanning electron microscope (SEM) photographs indicated that the lengths of fibrils from the substrate were $5-35{\mu}m$, depending on polymerization time. Carbonization was carried out using iodine-doped PA film and a morphology-retaining carbonization method. From the SEM results, we confirmed that the vertical morphology of the PA remains unchanged even after carbonization at $800^{\circ}C$. The weight loss of the films due to carbonization at $800^{\circ}C$ is about 20% of the weight of the film before iodine doping. It is expected that vertically aligned carbon might be a precursor for preparing vertical graphite materials, which materials could be useful for electrochemical energy storage and cell electrodes.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.293-300
• /
• 1999

This paper is aimed at the development of comprehensive environmental management system, which can be operated on the basis of world wide web. This study has been initiated as a topic of G7 project in 1988, and will be accomplished in 2001. Even thought there should be lots of works remaining to achieve this goal, preliminary products can be summarized as follows : 1) integrated environments information management system, 2) web based control engine, 3) surface water environment management system, 4) subsurface water environment management system, 5) sewer and waterworks management system. The core methodology of the engine is the generalized multidimensional finite element matrices to depict the terms in the analysis of various partial differential equations. Spatial information management system (ArcView) and Visual Basic were extensively employed to construct GUI oriented web based engine. Developed systems were consist with very intense computer codes due to the necessity of combinatory management of environmental problems. The web based engine could be served as a decision tool for the integrated management of environmental projects in Korea.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2316-2321
• /
• 2009

With rapid development of world economics, electricity demand in metropolitan area has been increased dramatically. HTS(High Temperature Superconducting) cable is one of most promising technology to solve the bottleneck of electric network. However, HTS cable is not considered as matured technology yet to power system planners because of its different characteristics with conventional metal conductors. This paper suggests the comparison results of HTS cable simulation and experiment on steady state operation, also give the simulation results on transient characteristics of HTS cable components. This results could devote not only to discuss the security of HTS cable operation, but also to design power system oriented HTS cable.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.25-31
• /
• 2009

Safety engineers should be reasonably assigned to construction sites in order to prevent accidents specially for large-scaled projects. More engineering-oriented safety engineers should be assigned to those large-scaled projects because accident causes are found to be due to more technical aspects rather than general safety problems. more experienced engineers should be assigned to larger scaled projects for covering more technical aspects. This one is analyzed by the existing accident results. This study is to find out some formulae to calculate how many safety engineers should be assigned to construction sites, by amounts, by project kinds, by project scales, by engineer grades. So that construction contractor can assign them to their site economically.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.275-276
• /
• 2014

일반적으로 래스터 그래픽스 기반으로 구성된 사용자 인터페이스는 등심선을 원하는 형태로 생성 및 편집하는 저작도구 인터페이스를 제공함에 있어 그래픽 모델의 확장성과 생산성에 대한 제약으로 인해 자유로운 그래픽 표현에 많은 어려움을 나타내고 있다. 본 논문에서는 이러한 문제를 해결하기 위해 객체 지향 그래픽스 기술인 WPF 사용자 인터페이스를 통해 벡터 곡선을 독립적인 콘텐츠로 모델링하여 등심선 생성 및 편집도구에 독창적이고 유연한 그래픽 표현이 가능하도록 사용자 인터페이스를 제공하는 방법을 제안한다. 이를 위해 등심선의 그래픽 레이아웃은 조절점과 곡선으로 분할하여 벡터 곡선에 대한 컨테이너 요소를 제공하였고, 최종적으로 프로토 타입의 저작도구를 이용해 등심선의 모의 편집 실험을 실시하여 제안하는 방법의 우수성을 확인하였다.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.282-285
• /
• 2002

In this paper, we report a modified technique for the production of oriented continuous nanofibers instead of non-woven mats using a rapidly rotating collection device. We are interested in retaining physical properties such as electrical conductivity of fiber bundles in their axial direction. The experiments were performed using polyethylene oxide (PEO) and its blend with polyaniline (PANI). According to the results, a typical fiber with a uniform diameter of about 100 nanometer was produced. The fibers from the PEO/ CHCl$_3$ solution show high crystallinity and good orientation whereas the fibers from the blend solution of PEO/PANI/m-cresol and CHCl$_3$ show no preferred orientation. However, the fibers of the blend exhibit high electrical conductivity of 33 S/cm for a fiber bundle at a PANI level of 50 %.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.11-16
• /
• 1998

In this paper, simultaneous estimation of rotor speed and time constant for a voltage source inverter (VSI) fed induction motor drive are disccussed. The theory is based on the Model Reference Adaptive System (MRAS). The identifier executes Simultaneous rotor speed and time constant so that vector control of the induction may be achieved in the rotor-flux oriented reference frame. Furthermore, to eliminate the offset error caused by the change in the stator resistance, a fuzzy resistance regulator is also designed which operates in parallel with the rotor speed and time constant identifier

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1377-1387
• /
• 2000

Many companies are investing in the development of the PDM(Prodct Data Management) system to improve the productivities of manufacturing since people believe that PDM technology can give a new solution from planning to development. As the requirements of PDM grows, so many industries sped their own budget on developing common requirements and functionalities. In this paper, we describe the framework for a PDM application to promote reuse in a PDM system development area. However, developing the framework is not easy. In this paper, the current state and results of our development are described: 1) the phases of developing our framework, 2) abstruction strategies, 3) programing model based on repository. Although frameworks improve software reuse, frameworks are so large and complex that application developers require to understand framework in order to customize the framework. To support the customization of framework, development environment is developed, also.