• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1908-1924
• /
• 2001

Interoperability and inter-working in the various network and media environment with different technology background is very important to enlarge the opportunity of service access and to increase the competitive power of service. The ITU-T and advanced counties are planning ahead for provision of GII enabling user to access advanced global communication services supporting multimedia communication applications, embracing all modes of information. In this paper, we especially forced the heterogeneity of end user applications for multimedia networking. The heterogeneity has several technical aspects, like different medium access methods, heterogeneous coding algorithms for audio-visual data and so on. Among these elements, we have been itemized bit rate shaping algorithm on the compressed moving video. Previous manipulations of video has been done on the uncompressed signal domain. That is, compressed video should be converted to linear PCM signal. To do such a procedures, we should decode, manipulate and then encode the video to compressed signal once again. The traditional approach for processing the video signa1 has several critical weak points, requiring complexity to implement, degradation of image quality and large processing delay. The bit rate shaping algorithm proposed in this paper process the manipulation of moving video on the completely compressed domain to cope with above deficit. With this algorithms. we could realized efficient video bit rate shaping and the result of software simulation shows that this method has significant advantage than that of pixel oriented algorithms.

• Journal of Energy Engineering
• /
• v.16 no.4
• /
• pp.202-214
• /
• 2007

The concept of HSA (Home Service Aggregator) is derived from performing the energy IT business efficiently as well as successfully launcing a new service based on BPL (Broadband over Power Line). The HSA business using a BPL can extend the field of energy industry and an give a chance to create a new demand by consumer-oriented services. This study focuses on the exact evaluation of HSA business using BPL, and reasonable trusty evaluation should be the first step to launch the HSA business. In this study, the categories of cost are comprised of equipment (mainly RSM and MGW) cost, instalation cost, and maintenance cost. AMR (Automatic Meter Reading), internet integration billing service, integration charging service, internet service, sorority service, and electricity safety are listed for benefit. In this study, the ROI of HSA business is 0.9594, which is less than 1. However, that value does not consider the electricity safety benefit which is classified as a social benefit. Therefore, the value can be above 1 if it includes social and private benefits.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.108-117
• /
• 2015

This study was carried out to assess problems related to legislative regulations and guidelines concerning some biological assessment systems applied to stream corridor in Korea. We comparatively reviewed the law of stream corridors and the guidelines for master plan concerned, and the law of water quality and health assessment criteria for the aquatic ecosystem concerned. Stream environments were not managed effectively due to the absence of detail regulations and the criteria for stream assessment. A biological assessment system was not equivalently integrated within the management of water resources in process implementation of projects resulting from the dualistic management system for stream corridors in Korea. The current biological assessment system was reflected to mainly physical habitats or only oriented to some aquatic species correlated with water quality. This system was also recognized as part of environment impact assessment based on an intensive survey method of most biological taxa. Conclusively rapid and quantitative assessment techniques based on advanced organisms, such as vegetation, fish and birds, etc. should be urgently provided for considering as representative indicators of stream conditions in Korea.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.346-355
• /
• 1997

In this paper, the analyses of the stress disturibution and frequency characteristics of silicon microstructures for an accelerometer were performed using the general purpose finite element simulation program, ANSYS. From the analyses, we determined the parameter values of a new 6-beam piezoresistive accelerometer applicable to the accelerometer's specification in airbag system of automobile. Then, the mass paddle radius, beam length, beam width, and beam thickness of the designed accelerometer were$500{\mu}m$, $350{\mu}m$, $100{\mu}m$, and $5{\mu}m$, respectively and two different seismic masses with 0.4 mg and 0.8 mg were defined on the same sensor structure. The designed 6- beam accelerometers were fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon substrates and the characteristics of the fabricated accelerometers were investigated. Then, we used a micromachining technique using porous silicon etching method for the formation of the micromechanical structure of the accelerometer.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.21-29
• /
• 1996

A piezoresistive silicon acceleration sensor with 8 beams, utilized by an unique silicon micromachining technique using porous silicon etching method which was fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon subtrates. The width, length, and thickness of the beam was $100\;{\mu}m$, $500\;{\mu}m$, and $7\;{\mu}m$, respectively, and the diameter of the mass paddle (the region suspended by the eight beams) was 1.4 mm. The seismic mass on the mass paddle was formed about 2 mg so as to measure accelerations of the range of 50g for automotive applications. For the formation of the mass, the solder mass was loaded on the mass paddle by dispensing Pb/Sn/Ag solder paste. After the solder paste is deposited, Heat treatment was carried out on the 3-zone reflow equipment. The decay time of the output signal to impulse excitation of the fabricated sensor was observed for approximately 30 ms. The sensitivity measured through summing circuit was 2.9 mV/g and the nonlinearity of the sensor was less than 2% of the full scale output. The output deviation of each bridge was ${\pm}4%$. The cross-axis sensitivity was within 4% and the resonant frequency was found to be 2.15 KHz from the FEM simulation results.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.407-413
• /
• 1997

The crystallized CuPc(copper phthalocyanine) film on a p-type <100> Si substrate is prepared at the substrate temperature of $300^{\circ}C$ by thermal evaporation. X -ray diffraction analysis showed the CuPc film to have a-axis oriented structure. For the measurement of photovoltaic characteristics of the CuPc/Si film and the Si substrate, a transverse current-voltage (I-V) curve is observed. In the dark, the Au/Si junction is shown to be ohmic contact. However, under illumination, a photovoltaic effect is not observed. The I-V curve in the dark indicates that the CuPc film on Si may form an ohmic contact. Since the CuPc film is a p-type semiconductor, the CuPc/p-Si junction has no barrier at the interface. Under illumination, the CuPc/Si junction shows a large photocurrent comparing with that of the wafer. The result indicates that the CuPc layer plays an important role in the photocarrier generation under red illumination (600 nm). The CuPc/Si film shows the photo voltaic characteristics with a short-circuit photocurrent ($J_{sc}$) of $4.29\;mA/cm^{2}$ and an open-circuit voltage ($V_{oc}$) of 12 mA.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.43-52
• /
• 2006

The most important issue the online shopping mall for clothes is facing in the rapid growth of the online shopping mali is the high rate of the return of the goods alter purchase. The high rate of the return leads to the dissatisfaction md lack of trust from the consumers in the online shopping mall for clothes, which in turn leads to the bleak prospect for the online shopping mall for clothes as a result of the consumers' dissatisfaction. Although a type of online shopping mall using the cyber-fitting technology has emerged recently, it has succeeded only in provoking a visual interest, for it is also not satisfying the demand of the consumers by falling short in providing information. Thus, this research seeks for the resolutions of the problems related to the user-oriented online shopping. First of the resolutions is the development of a new prototype which the consumers can easily access; second is the visualization of the information using the 3D virtual-reality of he prototype through interface, which will help the consumers to make more accurate judgments. In other words, this study seeks to provide a type of prototype of an online shopping mall that meets the demand of the consumers using the 3D avatars, unlike the unilateral and conventional malls out there.

• Archives of design research
• /
• v.12 no.4
• /
• pp.99-108
• /
• 1999

The interior space in a passenger car is consisted with many partial elements, and the instrument panel is the most important part from all of them, which is designate the total image of the interior design and the space variation, drivability and safety of the interior space. ] The instrument panel of a passenger car in the early age had the concept of a wall between the engine room and the passenger cabin on which the instrument for the driver were fitted. Therefore the central mounting of the instruments was the typical feature regardless of the position of a driver seat. As the automobiles became more functional with many equipments, driver oriented instrument panel with energy absorbing materials had been developed, and that was the beginning of the various instrument panel design of these days. The recent instrument panels of passenger car have the tendency of going back to the central instrument mounting as it was at the past on a few cars for the strict safety regulation, a new production technology and for the enhanced drivability. It can be summarized into a few results as these with the analysis of a few recent instrument panels. -minimizing the total volume for the better frontal visibility. -energy absorbing and passive structures for the strict impact regulations. -revival of central instrument mounting for the convenience and safety through minimizing the difference of the focal length of a driver.

• Quality Improvement in Health Care
• /
• v.26 no.1
• /
• pp.23-34
• /
• 2020

Purpose: This qualitative study was conducted to examine the current status and problems concerning the collection of present on admission (POA) indicators and determine how to use these indicators for evaluating the quality of care and degree of patient safety. Methods: A total of 11 health information managers were divided into two groups according to the size of their hospitals. Two focus group discussions (FGDs) were conducted, one for each group, which followed a pre-developed semi-structured guideline. The verbatim transcriptions of the FGDs were analyzed. Results: The majority of participants were concerned about entering POA flags honestly because they did not know how future POA indicators would be used. In particular, for some participants, POA N was a burden that could imply a signal of mismanagement within the medical institution. In addition, the lack of awareness and indifference of physicians regarding POA indicators were some of the difficulties for POA flag entry. Although medical institutions are making efforts to improve the accuracy of POA flagging, many participants mentioned the need to develop real case-oriented POA entry guidelines to improve the accuracy of POA flagging. Conclusion: To increase the validity of POA indicators, it is necessary to increase the level of awareness of POA indicators in physicians and other medical professionals. Furthermore, efforts related to POA indicators by individual medical institutions need to be reflected in the process evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.48-54
• /
• 2017

University dormitories play an important role in both the campus experience and academic achievement, as well as providing the students with their basic necessities. Further, there is a high demand to increase the capacity in order to raise the retention rate and to invite more foreign students. Students' social interaction and sense of community (SOC) also play an important role in reducing the stress associated with studying and home sickness and, consequently,the campus is a place that provides positive opportunities for their personal growth and adaptation into their peer group social culture. The purpose of this study is to investigate the effects of the physical environment of the dormitory facilities on the students' sense of community and social interaction in across-cultural background.The ${\chi}^2$ analysis indicated that individual characteristics exist regarding SOC, however, there were no statistically significant differences between the two cultural groups. The factors of SOC and physical environment were higher in the Korean student group than in the U.S. group. The regression analysis indicated that the U.S. students considered a physically comfortable environment as the primary issue for social interaction, while the Korean group placed more emphasis on a family-oriented home environment. The linear analysis confirmed that satisfaction with the physical environment influenced the social interaction and SOC level. Finally, this study suggests that creating a homely environment is more important than the functioning of the institution in university dormitory planning.