• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.235-252
• /
• 2022

This study empirically identified how technological innovation capability and technological commercialization capability affect management performance in the metropolitan area of Ppuri corporation. As results of the research analysis, First the average company performance in the field of new materials and platform processing technology was higher than that of the metal-oriented processing technology field. Second, technological innovation capability variables are included as R&D capability, technological innovation regime, and technological accumulation capability are shown the statistically significant on non-financial performance. Commercialization capability, producing capability, and marketing capability variable are statistically significant on financial performance.

• Food Science of Animal Resources
• /
• v.43 no.6
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

• The Journal of Society for e-Business Studies
• /
• v.17 no.1
• /
• pp.1-21
• /
• 2012

Conventional studies on technology acceptance have focused on information technology for utilitarian value and hence based on 'theory of reasoned action'. Correspondingly, the studies depend on perceived usefulness and perceived ease of use as rational decision making elements. However, in ubiquitous society, innovative technologies are applied to non-task area, as well as task-oriented area. Therefore, users are more influenced by affective factors than cognitive factors in causing their usage intention. In line with those discussions, we cannot make sure that the conventional technology acceptance model could fully explain the current u-service acceptance phenomenon. Hence, to overcome the limitations of the prior technology acceptance studies, we propose an amended TAM which includes one hedonic factor and two factors on ubiquitous computing technology : ubiquity and intelligence.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.95-99
• /
• 2006

Recently, as diffusing knowledge-based information society, creation and information literacy of knowledge information is being important factor. Specifically, with increasing of science-technology information and information needs of science-technology information users are becoming segment and specialization. Also, study results of science-technology being used instantly in industry field and because of impact on industry development, science-technology information is growing rapidly. Therefore, customer-oriented system building is important. So, The purpose of this paper is to analyze and describe the characteristics of information needs and using behavior of science-technology information users of the KISTI.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.202-206
• /
• 2002

$\lceil$The Construction Technology Development Master Plan$\rfloor$ aimed to promote construction technology R&D and to use its result efficiently is a legal plan based on Construction Technology and Management Law and established every five years. Now $\lceil$The 3th Construction Technology Development Master Plan(The 3th Master Plan)$\rfloor$ is establishing by MOCT(Ministry of Construction & Transportation) because the 2th Master Plan is completed at 2002. The 3th Master Plan suggests 'Establishment of construction environment leading the world-wide construction market' as a long-term vision, and also presents basic targets ; 'Improvement of competitiveness through conducting construction project efficiently', 'Transform into technology-oriented industry'. It consists of 7 fields and 25 main subjects. The 7 fields are construction manpower, production system, environment, safety, construction information, construction engineering, construction R&D.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.195-203
• /
• 2017

A 2U cube satellite called SNUGLITE has been developed by GNSS Research Laboratory in Seoul National University. Its main mission is to perform actual operation by mounting dual-frequency global positioning system (GPS) receivers. Its scientific mission aims to observe space environments and collect data. It is essential for a cube satellite to control an Earth-oriented attitude for reliable and successful data transmission and reception. To this end, an attitude estimation and control algorithm, Attitude Determination and Control System (ADCS), has been implemented in the on-board computer (OBC) processor in real time. In this paper, the Extended Kalman Filter (EKF) was employed as the attitude estimation algorithm. For the attitude control technique, the Linear Quadratic Gaussian (LQG) was utilized. The algorithm was verified through the processor in the loop simulation (PILS) procedure. To validate the ADCS algorithm in the ground, the experimental verification via a single axis Hardware-in-the-loop simulation (HILS) was used due to the simplicity and cost effectiveness, rather than using the 3-axis HILS verification (Schwartz et al. 2003) with complex air-bearing mechanism design and high cost.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.136-148
• /
• 2017

In recent years, voltage source multilevel converters are very popular in medium/high-voltage industrial applications, among which the NPC/H-Bridge converter is a popular solution to the medium/high-voltage drive systems. The conventional finite control set model predictive control (FCS-MPC) strategy is not practical for multilevel converters due to their substantial calculation requirements, especially under high number of voltage levels. To solve this problem, a hierarchical model predictive voltage control (HMPVC) strategy with referring to the implementation of g-h coordinate space vector modulation (SVM) is proposed. By the hierarchical structure of different cost functions, load currents can be controlled well and common mode voltage can be maintained at low values. The proposed strategy could be easily expanded to the systems with high number of voltage levels while the amount of required calculation is significantly reduced and the advantages of the conventional FCS-MPC strategy are reserved. In addition, a HMPVC-based field oriented control scheme is applied to a drive system with the NPC/H-Bridge converter. Both steady-state and transient performances are evaluated by simulations and experiments with a down-scaled NPC/H-Bridge converter prototype under various conditions, which validate the proposed HMPVC strategy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.129-140
• /
• 2012

Korea Atomic Energy Research Institute(KAERI) invested the technology and made the Research Institute Company, SunBioTech with Korea Colma in 2006. It is the first Research Institute Company, based on the 'Law for Daedeok Innopolis Development'. this company made a product of HemoHim which is the supportive functional food for the cancer treatment. This technology is very unique and get the Triad Patent Families. This paper deal with the new technology based innovation and the product is very sensitive because of the consumer oriented. We study the successful technology commercialization process of HemoHim and suggest a implication for the company and decision makers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.287-294
• /
• 2010

The focus of this paper falls on assessing how well rule of crafting government R&D institution spin-off companies(GRSCs), legitimatized to boost up technology commercialization of government research institutions(GRIs) at Daedeok Innopolis in 2006, affect the better business performance of GRSCs, but also delivering alternatives of driving up their better business. First of all, this paper evaluate a management performance of GRSCs at the financial aspect by taking 5 different GRSCs cases among 16 to measure the overall performance of GRSCS's Technology commercialization. Second, this paper assess the effectiveness of GRSCs to bring the better performance of technology commercialization. Third, this paper suggest soft program-centered technology commercialization model, rather institution and ceremonial-oriented one, for GRIs. Overall, the outcomes of this paper will contribute to accommodate the rule of GRSCs attaining goals set in the initial policy domain.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.193-208
• /
• 2005

The object of this study is to provide a framework of increasing the effectiveness of the R&D planning of experts in fisheries and the education of students with the theoretical background and analytical skills through the adoption of technology roadmapping process in the marine production industry. The study was conducted by fact-finding surveys and the response content for surveys obtained from each expert advisor in the field of fisheries and maritime affairs such as fishery industries, some government organizations and research institutes including the Ministry of Maritime Affairs and Fisheries (MOMAF), National Fisheries Research and Development Institute (NFRDI) and fisheries-related universities was analyzed. The major implementation tasks to effectively achieve the basic goals of technology roadmap for short and middle-term research and development in the fisheries production field are as follows: 1. Research in order to achieve the realization of community-based resource management fisheries or fishermen-oriented co-management fisheries with paradigm shift in fisheries management. 2. Research in order to derive the construction of cost reducing and manpower saving systems in fishery-related science, technology and engineering. 3. Research in order to create the high value-added fisheries products with a focus on the upgrading of processing, freezing and refrigerating facilities, the reduction of logistics costs and the minimization of distribution steps. 4. Research in order to achieve the realization and development of environmental-friendly fisheries and internationally competitive fisheries through restructuring the entire fishing industries, in particular, small-scale fisheries. 5. Research in order to achieve the effective utilization of fisheries resources with a new creation of clean and living marine environment by fisherman under the balanced management and protection of marine living resources and fishing grounds.