• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.13-25
• /
• 2012

Ground anchor method is one of the most popular reinforcing technology for slope in Korea. For the health monitoring of slope which is reinforced by permanent anchor for a long period, monitoring of the tension force of ground anchor is very important. However, since electromechanical sensors such as strain gauge and V/W type load cell are also subject to long-term risk as well as suffering from noise during long distance transmission and immunity to electromagnetic interference (EMI), optical FBG sensors embedded tendon was developed to measure strain of 7-wire strand by embedding FBG sensor into the center king cable of 7-wire strand. This FBG sensors embedded tendon has been successfully applied to measuring the short-term anchor force. But to adopt this tendon to long-term monitoring, temperature compensation of the FBG sensors embedded tendon should be done. In this paper, we described how to compensate the effect in compliance with the change of underground temperature during long-term tension force monitoring of ground anchors by using optical fiber sensors (FBG: Fiber Bragg Grating). The model test was carried out to determine the temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon. The determined temperature sensitivity coefficient ${\beta}^{\prime}=2.0{\times}10^{-5}/^{\circ}C$ was verified by comparing the ground temperatures predicted from the proposed sensor using ${\beta}^{\prime}$ with ground temperatures measured from ground thermometer. Finally, temperature compensations were carried out based on ${\beta}^{\prime}$ value and ground temperature measurement from KMA for the tension force monitoring results of tension type and compression type anchors, which had been installed more than 1 year before at the test site. Temperature compensated tension forces are compared with those measured from conventional load cell during the same measuring time. Test results show that determined temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon is valid and proposed temperature compensation method is also appropriate from the fact that the temperature compensated tension forces are not dependent on the change of ground temperature and are consistent with the tension forces measured from the conventional load cell.

• Journal of The Korean Association For Science Education
• /
• v.36 no.6
• /
• pp.925-934
• /
• 2016

For students, astronomy is not only interesting but also difficult to learn. However, there is a limit in learning astronomy in a school science setting since astronomy is vast subject. Fortunately, science museums can be helpful in overcoming this limitation. Experiences in science museum provide something that any descriptions or illustrations cannot give. Therefore, to maximize the educational effect, it is necessary to look at astronomical exhibits regarding the educational aspects and complement them. For these reasons, the purpose of this study is to investigate characteristics of exhibitions related to astronomy and how much the exhibitions reflect the contents of their science curricula. We selected famous science museums in Korea, America, and Japan and analyzed characteristics of their astronomy exhibition. We analyze these characteristics in the aspects of exhibition technology & media, presentation method and activity types. Also, this study figures out how content of exhibitions are connected to school science curriculum. The results are summarized as follows: First, Science Museums of America and Japan utilize interactive exhibits to raise participation. It implies that Science Museum of Korea needs Interactive Exhibits that provide a realistic experience of the universe. Second, the astronomy exhibits reflect some of the learning elements of their science curricula concerned with astronomy. However, these astronomical contents are included selectively and not according to their required curriculum. It means that many students lack the opportunity to study Astronomy in their schools. Therefore, the astronomy museum must reflect learning elements of science curricula concerned with astronomy in the exhibits.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.27-47
• /
• 1998

The Purpose of this study is to offer basic data when the new printed media for sex education are developed, by grasping the problem through analyzing the data of the printed media for sex education that are produced by the government and composed of relatively inclusive contents. The subjects of analyzed data were 10 printed media books connected with sex education. This study focused on analysis for the printed media. therefore the method of analysis used effectively for the study of the mass media was used. The SAS program was used for analyzing the frequency of data and processing with percentage. The result of this study is as follows. 1. The subject of sex education that the printed media intend for was classfied the data for students and for teachers and the general. 2. According to the result of analyzing the writers of the printed media for sex education, classified by occupation, research workers accounted for $30.2\%$ as 23 persons, and the rest were distributed as 19 professors $(25\%)$, 13 teachers $(17.2\%)$, 10 workers in related institutions of various kinds $(13.1\%)$, 6 doctors $(10.6\%)$ and 3 writers $(3.9\%)$. Examing the organization of writers of the printed media for sex education for students, it was composed of sequence as research workers $30.5\%$. workers in related institutions of various kinds $19.6\%$, teachers $19.5\%$, professors $13\%$, doctors $10.8\%$ and writers $6.5\%$. And that of writers of the printed media for sex education for teachers and the general was shown as professors $43.2\%$ (13 persons), research workers $30.1\%$ (9 persons), teachers $13.2\%$ (4 persons) and doctors $10.2\%$ (3 persons). 3. Seeing the result of analyzing for the printed media, classified by themes, it was shown as 314.1 pages $(28.5\%)$ in a field of development of men, 195.9 pages $(17.6\%)$ in a field of sex-health, 141.7 pages $(12.9\%)$ in a field of relationship. 74.1 pages $(6.7\%)$ in a field of a sex act. 51.7 pages $(4.6\%)$ in a field of a personnal technology and 313.4 pages $(28.4\%)$ in the others. As are suit of the analysis classified by themes about the printed media for sex education for students, it was distributed as the content about sexual abuse $12.3\%$ (60.2 pages), the anatomical physiology of reproduction $12.1\%$ (59.3 pages). a friendship $8.5\%$ (41.6 pages). the reproduction $7.2\%$ (35.5 pages). a sexual disease $6.8\%$ (33.2 pages) and the puberty $4.3\%$ (20.9 pages). Examing the result of the analysis about contents classified by themes of the printed media for sex education for teachers and the general. it was indicated as 67.1 pages $(10.9\%)$ on the 'puberty', 37.9 pages $(6.2\%)$ on the anatomical physiology of reproduction, 36.6 pages ($6.0\%$ on a sexual disease, 23.2 pages $(3.8\%)$ on dating, 21.7 pages $(3.5\%)$ on a human sexual reaction. 21.0 pages $(3.4\%)$ on a sexual role. 20.1 pages $(3.3\%)$ of the reproduction. The suggestion according to the upper result is as follows. 1. It is needed to expand the range of analysis into the data. besides the printed media. into the data for sex education using such media as a video. a slide, a CD-ROM, on internet, etc. 2. It is necessary to develop the ideal program for sex education of teenagers and analyze the effect. on the basis of analyzing data about data sex education. 3. It is needed that practice workers for nursing or teachers for nursing as well as workers in educational field or medical experts participate in producing data for sex education.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.95-126
• /
• 2020

In 2017, the world's first WIG ship (WIG: Wing In-Ground) pilot's license written test was conducted in Korea. The WIG ship is a ship that combines the characteristics of ships and airplanes. Therefore, the pilot of the WIG ship was allowed to apply only for those who had the aircraft pilot's license and the 6th class marine nautical license. The WIG ship pilot's license system was first introduced by Korea, so there are no international standards for the license system, and the introduction of a domestic qualification system also requires institutional arrangements due to various restrictions such as pilot training. However, in order to become a valuable industry as a future growth engine for the ocean, several urgent problems need to be solved, and that is the training of manpower for WIG ships. Therefore, I reviewed the institutional issues related to pilot training as this subject. Since 2001, various countries around the world have been discussing this issue, centering on IMO, and Korea has continued to participate and cooperate in IMO meetings. And the national qualification test for surface flying ships was conducted in Korea from 2011. However, there are still problems to be solved, and I pointed out the advancement of the manpower training system, the education and training system, and the designated national educational institution system. As a solution to this, it was suggested through the improvement of the license system and the operation of designated educational institutions. Among these solutions, I believe that the best way is to entrust the operation of designated national educational institutions to private educational institutions. However, I propose a plan that the government entrusts to private educational institutions, but the government is responsible for licensing and supervision. WIG ship will be a new market for the aviation industry and aviation workers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.2
• /
• pp.169-174
• /
• 2010

Purpose: The purpose of this study is to evaluate the long-term stability of the improved symptoms and accommodative functions after completion of accommodative therapy. Methods: Seven children (mean age${\pm}$SD: $12{\pm}1.41$ years) who were successfully treated with a vision therapy program for either accommodative insufficiency or infacility were followed for 1 year. The visual symptoms of the subjects were measured by the College of Optometrists in Vision Development Quality of Life (COVD-QOL) checklist, and this was followed by measurement of the monocular and binocular accommodative facility with ${\pm}2.00$ D flipper lens. Results: The mean visual symptoms at the 1 year follow-up examination ($15.14{\pm}8.59$) showed a small increase, but there was no significant difference (p=0.446) from post-therapy ($11.86{\pm}7.22$). There was small regression in the monocular (left eye, $13.86{\pm}3.93cpm$) and binocular ($11.14{\pm}3.13cpm$) accommodative facility at the 1 year follow-up examination, but there were no significant different from the monocular ($15.86{\pm}4.14cpm$, p=0.147) and binocular ($13.21{\pm}3.76cpm$, p=0.066) accommodative facility measurements at post-therapy. Also, every subject met the normative values of ${\geq}7$ cpm for monocular accommodative facility and ${\geq}5$ cpm for binocular accommodative facility in the long-term. Conclusions: There was long-term maintenance of the improved visual symptoms and accommodative functions, and so it is clear that the positive therapeutic effects persist with accommodative therapy.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.113-145
• /
• 2009

Recently, due to the globalization of the IT(Information Technology) market, devices and systems designed in one country are used in other countries as well. This phenomenon is becoming the key factor for increased interest on cross-cultural, or cross-national, research within the IT area. However, as the IT market is becoming bigger and more globalized, a great number of IT practitioners are having difficulty in designing and developing devices or systems which can provide optimal experience. This is because not only tangible factors such as language and a country's economic or industrial power affect the user experience of a certain device or system but also invisible and intangible factors as well. Among such invisible and intangible factors, the cultural characteristics of users from different countries may affect the user experience of certain devices or systems because cultural characteristics affect how they understand and interpret the devices or systems. In other words, when users evaluate the quality of overall user experience, the cultural characteristics of each user act as a perceptual lens that leads the user to focus on a certain elements of experience. Therefore, there is a need within the IT field to consider cultural characteristics when designing or developing certain devices or systems and plan a strategy for localization. In such an environment, existing IS studies identify the culture with the country, emphasize the importance of culture in a national level perspective, and hypothesize that users within the same country have same cultural characteristics. Under such assumptions, these studies focus on the moderating effects of cultural characteristics on a national level within a certain theoretical framework. This has already been suggested by cross-cultural studies conducted by scholars such as Hofstede(1980) in providing numerical research results and measurement items for cultural characteristics and using such results or items as they increase the efficiency of studies. However, such national level culture has its limitations in forecasting and explaining individual-level behaviors such as voluntary device or system usage. This is because individual cultural characteristics are the outcome of not only the national culture but also the culture of a race, company, local area, family, and other groups that are formulated through interaction within the group. Therefore, national or nationally dominant cultural characteristics may have its limitations in forecasting and explaining the cultural characteristics of an individual. Moreover, past studies in psychology suggest a possibility that there exist different cultural characteristics within a single individual depending on the subject being measured or its context. For example, in relation to individual vs. collective characteristics, which is one of the major cultural characteristics, an individual may show collectivistic characteristics when he or she is with family or friends but show individualistic characteristics in his or her workplace. Therefore, this study acknowledged such limitations of past studies and conducted a research within the framework of 'theoretically integrated model of user satisfaction and emotional attachment', which was developed through a former study, on how the effects of different experience elements on emotional attachment or user satisfaction are differentiated depending on the individual cultural characteristics related to a system or device usage. In order to do this, this study hypothesized the moderating effects of four cultural dimensions (uncertainty avoidance, individualism vs, collectivism, masculinity vs. femininity, and power distance) as suggested by Hofstede(1980) within the theoretically integrated model of emotional attachment and user satisfaction. Statistical tests were then implemented on these moderating effects through conducting surveys with users of four digital devices (mobile phone, MP3 player, LCD TV, and refrigerator) in three countries (US, Germany, and Russia). In order to explain and forecast the behavior of personal device or system users, individual cultural characteristics must be measured, and depending on the target device or system, measurements must be measured independently. Through this suggestion, this study hopes to provide new and useful perspectives for future IS research.

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2002

Positron Emission Tomography (PET) is a nuclear medicine imaging modality that consists of systemic administration to a subject of a radiopharmaceutical labeled with a positron-emitting radionuclide. Following administration, its distribution in the organ or structure under study can be assessed as a function of time and space by (1) defecting the annihilation radiation resulting from the interaction of the positrons with matter, and (2) reconstructing the distribution of the radioactivity from a series of that used in computed tomography (CT). The nuclides most generally exhibit chemical properties that render them particularly desirable in physiological studies. The radionuclides most widely used in PET are F-18, C-11, O-15 and N-13. Regarding to the number of the current PET Centers worldwide (based on ICP data), more than 300 PET Centers were in operation in 2000. The use of PET technology grew rapidly compared to that in 1992 and 1996, particularly in the USA, which demonstrates a three-fold rise in PET installations. In 2001, 194 PET Centers were operating in the USA. In 1994, two clinical and research-oriented PET Centers at Seoul National University Hospital and Samsung Medical Center, was established as the first dedicated PET and Cyclotron machines in Korea, followed by two more PET facilities at the Korea Cancer Center Hospital, Ajou Medical Center, Yonsei University Medical Center, National Cancer Center and established their PET Center. Catholic Medical School and Pusan National University Hospital have finalized a plan to install PET machine in 2002, which results in total of nine PET Centers in Korea. Considering annual trends of PET application in four major PET centers in Korea in Asan Medical Center recent six years (from 1995 to 2000), a total of 11,564 patients have been studied every year and the number of PET studies has shown steep growth year upon year. We had 1,020 PET patients in 1995. This number increased to 1,196, 1,756, 2,379, 3,015 and 4,414 in 1996,1997,1998,1999 and 2000, respectively. The application in cardiac disorders is minimal, and among various neuropsychiatric diseases, patients with epilepsy or dementia can benefit from PET studios. Recently, we investigated brain mapping and neuroreceptor works. PET is not a key application for evaluation of the cardiac patients in Korea because of the relatively low incidence of cardiac disease and less costly procedures such as SPECT can now be performed. The changes in the application of PET studios indicate that, initially, brain PET occupied almost 60% in 1995, followed by a gradual decrease in brain application. However, overall PET use in the diagnosis and management of patients with cancer was up to 63% in 2000. The current medicare coverage policy in the USA is very important because reimbursement policy is critical for the promotion of PET. In May 1995, the Health Care Financing Administration (HCFA) began covering the PET perfusion study using Rubidium-82, evaluation of a solitary pulmonary nodule and pathologically proven non-small cell lung cancer. As of July 1999, Medicare's coverage policy expanded to include additional indications: evaluation of recurrent colorectal cancer with a rising CEA level, staging of lymphoma and detection of recurrent or metastatic melanoma. In December of 2001, National Coverage decided to expand Medicare reimbursement for broad use in 6 cancers: lung, colorecctal, lymphoma, melanoma, head and neck, and esophageal cancers; for determining revascularization in heart diseases; and for identifying epilepsy patients. In addition, PET coverage is expected to further expand to diseases affecting women, such as breast, ovarian, uterine and vaginal cancers as well as diseases like prostate cancer and Alzheimer's disease.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.229-234
• /
• 2012

Disinfecting contaminated swine manure with FMD (Foot-and-Mouth Disease) and pathogenic viruses is very important for maintaining sanitized environment. However, very few research reported on this subject, especially post-disinfection to utilize the wastes as a renewable resource. This research is carried out to obtain basic information for chemical treatment in FMD SOP (Standard Operating Procedure, Korea) of contaminated swine manure. Using lime, sodium hydroxide, citric acid and hydrochloric acid, described in FMD SOP, the effects of chemical treatments on livestock manure were compared in this paper. Four combinations of alkali-acid treatments and four kinds of acid-alkali combinations were tested to find out the effective method. Total coliform bacteria in contaminated swine manure, $1.6{\times}10^4$ CFU/100 ml, decreased to the range of 1/1000~1/100 in all treatments. Some specific disinfectants increases BOD (Biochemical Oxygen Demand) and EC(Electric Conductivity), especially, alkaline treatments increases ammonia level than acid treatments. These findings suggest that the treatment methods should be considered as an important environmental factor in post-disinfection of contaminated animal manure with pathogenic microorganisms.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.