• 제목/요약/키워드: Technology Combination

검색결과 4,123건 처리시간 0.028초

DIRECTIONAL CONVEXITY OF COMBINATIONS OF HARMONIC HALF-PLANE AND STRIP MAPPINGS

  • Beig, Subzar;Ravichandran, Vaithiyanathan
    • 대한수학회논문집
    • /
    • 제37권1호
    • /
    • pp.125-136
    • /
    • 2022
  • For k = 1, 2, let $f_k=h_k+{\bar{g_k}}$ be normalized harmonic right half-plane or vertical strip mappings. We consider the convex combination ${\hat{f}}={\eta}f_1+(1-{\eta})f_2={\eta}h_1+(1-{\eta})h_2+{\overline{\bar{\eta}g_1+(1-\bar{\eta})g_2}}$ and the combination ${\tilde{f}}={\eta}h_1+(1-{\eta})h_2+{\overline{{\eta}g_1+(1-{\eta})g_2}}$. For real 𝜂, the two mappings ${\hat{f}}$ and ${\tilde{f}}$ are the same. We investigate the univalence and directional convexity of ${\hat{f}}$ and ${\tilde{f}}$ for 𝜂 ∈ ℂ. Some sufficient conditions are found for convexity of the combination ${\tilde{f}}$.

자연표토 복원공법에 의한 암절취비탈면의 생태적 복원에 관한 연구 : 원주사례지역을 중심으로 (Study on the Ecological Restoration of Rock-exposed-cut-slope by Natural Topsoil Restoration Methods : In Case of Won-Ju Experiment)

  • 남상준;석원진;김남춘
    • 한국환경복원기술학회지
    • /
    • 제2권4호
    • /
    • pp.54-63
    • /
    • 1999
  • This study was conducted to suggest the ecological restoration and environmentally friendly revegetation technology for the rock-exposed cut-slopes by the Natural Topsoil Restoration Methods (NTRM) with the following restoration objectives; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of the disturbed slopes. On Nov. in 1995, the 5cm thick layer of artificial soil and 2cm thick layer of straw-mulching was attached at rock-exposed cut-slopes by NTRM without using anchor wire and anchor pin. The main results during four years surveying on the ground-coverage effect, plant growth, species diversity and importance values were summarized as follows. 1. Artificial soil attached at rock exposed cut-slopes was not eroded until recovered by tree and herbaceous vegetation in spite of not using anchor wire and anchor pin. Also it shows low soil hardiness and has almost the same amount of bacteria and fungi with in surrounding natural topsoil. 2. In 'combination for the woody vegetation', Lespedeza cyrtobotrya, Albizzia julibrissin, Rhus chinensis, Indigofera pseudo-tinctoria occupied upper layer vegetation. Since three years after seeding, Indigofera pseudo-tinctoria had overwhelmed the other woody plants and cool season foreign grasses, Erigeron canadensis, Taraxacum mongolicum, Commelina communis, Arundinella hirta (Thunberg) and Oenothera erythrosepala grows at lower part of the vegetation, 3. The heights of the Rhus chinensis grows 1.8m, Indigofera pseudo-tinctoria 2.0m, so it seems that the objectives of woody vegetation with native plants could be accomplished. 4. After 4 years later after seeding in 'combination for the herbaceous vegetation', the most dominant plant was Indigofera pseudo-tinctoria, the next was in order of cool-season grasses, Taraxacum mongolicum, Erigeron canadensis, lxeris dentata (Thunberg), Oenothera erythrosepala, Arundinella hirta (Thunberg). The diversity index in 'combination for woody vegetation' was higher than that in 'combination for the herbaceous vegetation'. The tendency of the intrusion of secondary succession plants was more effective in 'combination for the herbaceous vegetation' than in 'combination for the woody vegetation'.

  • PDF

Combination of isoproterenol and length oscillations in relaxing porcine airway smooth muscles

  • Al-Jumaily, Ahmed M.;Mathur, Meha;Cairns, Simeon
    • Biomaterials and Biomechanics in Bioengineering
    • /
    • 제2권4호
    • /
    • pp.225-235
    • /
    • 2015
  • Treatments for asthma are largely pharmaceutical, with some therapies also utilising alternative breathing techniques. The objective of both medical and alternative methods is to relax contracted airway smooth muscle (ASM). In normal subjects, tidal breathing- and deep inspiration-oscillations are believed to have a bronchodilatory effect. Similarly, application of length oscillations to isolated, contracted ASM also elicits muscle relaxation. As a means of investigating more-effective alternative treatment methods for contracted airways, we analyse the combined effects of bronchodilators and length oscillations on isolated, contracted ASM. The contractile state of the muscle tissue prior to treatment is of primary interest. Thereafter, the effect of applying a combination of small superimposed length oscillations with tidal breathing-like oscillations to ASM is studied alone and in combination with a common bronchodilator, isoproterenol (ISO). This work suggests that relaxation of isolated, contracted ASM following application of combined oscillations and ISO is larger than treatments of either combined oscillations or ISO alone. Further, the observed oscillation-associated relaxation is found to be amplitude- rather than frequency-dependent. This study gives additional insight into the role of oscillations and bronchodilators on contracted airways.

Corrugated Board의 최적내형설계 소프트웨어 개발 (Development of a Optimum Inward Design Software for Corrugated Board)

  • 박종민
    • 한국포장학회지
    • /
    • 제10권1호
    • /
    • pp.27-36
    • /
    • 2004
  • Software summarized packaging technology related is needed for low cost and high efficiency in production and packaging design of corrugated board, and in development of these softwares, distribution and packaging environment of one's country must be reflected, well. In domestic occasion, software related to corrugated board packaging dont's exist nearly, and in many industrial fields, the more higher role and importance of packaging in various industrial field is, the more higher necessity of that is. In this study, on the base of preceeding studies (Park, 2001; 2003; 2003), software to optimize board combination that is most importance and sensitivity in composition of cost elements in production and packaging design of corrugated board was developed. This software was composed of input module, output module, database and management module, and calculation module, and efficiency of this software was analyzed on the both sides of sensitivity in design result and effectiveness in a case analyse. In the inward design results having same strength, board combination balance, bursting strength, box weight, and cost were greatly different. Therefore, optimum inward design according to user's design specifications is possible, and in a case analysis for actual products, obtained the more profitable results than before design.

  • PDF

A NOTE ON LINEAR COMBINATIONS OF AN IDEMPOTENT MATRIX AND A TRIPOTENT MATRIX

  • Yao, Hongmei;Sun, Yanling;Xu, Chuang;Bu, Changjiang
    • Journal of applied mathematics & informatics
    • /
    • 제27권5_6호
    • /
    • pp.1493-1499
    • /
    • 2009
  • Let $A_1$ and $A_2$ be nonzero complex idempotent and tripotent matrix, respectively. Denote a linear combination of the two matrices by A = $c_1A_1$ + $c_2A_2$, where $c_1,\;c_2$ are nonzero complex scalars. In this paper, under an assumption of $A_1A_2$ = $A_2A_1$, we characterize all situations in which the linear combination is tripotent. A statistical interpretation of this tripotent problem is also pointed out. Moreover, In [2], Baksalary characterized all situations in which the above linear combination is idem-potent by using the property of decomposition of a tripotent matrix, i.e. if $A_2$ is tripotent, then $A_2$ = $B_1-B_2$, where $B^2_i=B_i$, i = 1, 2 and $B_1B_2=B_2B_1=0$. While in this paper, by utilizing a method different from the one used by Baksalary in [2], we prove the theorem 1 in [2] again.

  • PDF

스마트 센서와 시각적 기술자를 결합한 사진 검색 시스템 (Photo Retrieval System using Combination of Smart Sensor and Visual Descriptor)

  • 이용환;김흥준
    • 반도체디스플레이기술학회지
    • /
    • 제13권2호
    • /
    • pp.45-52
    • /
    • 2014
  • This paper proposes an efficient photo retrieval system that automatically indexes for searching of relevant images, using a combination of geo-coded information, direction/location of image capture device and content-based visual features. A photo image is labeled with its GPS (Global Positioning System) coordinates and direction of the camera view at the moment of capture, and the label leads to generate a geo-spatial index with three core elements of latitude, longitude and viewing direction. Then, content-based visual features are extracted and combined with the geo-spatial information, for indexing and retrieving the photo images. For user's querying process, the proposed method adopts two steps as a progressive approach, filtering the relevant subset prior to use a content-based ranking function. To evaluate the performance of the proposed scheme, we assess the simulation performance in terms of average precision and F-score, using a natural photo collection. Comparing the proposed approach to retrieve using only visual features, an improvement of 20.8% was observed. The experimental results show that the proposed method exhibited a significant enhancement of around 7.2% in retrieval effectiveness, compared to previous work. These results reveal that a combination of context and content analysis is markedly more efficient and meaningful that using only visual feature for image search.

Design for reduction EMI of flyback switching power supply

  • Theirakul, Chaivat;Prempraneerach, Yothin
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1891-1895
    • /
    • 2003
  • Switch-mode power supplies (SMPS) have become a major source of conducted electromagnetic interference (EMI) which is the combination between differential mode (DM) noise and common mode (CM) noise. This paper presents the conducted EMI reduction approach in flyback switched mode power supply by rerouting for circuit balance to reduce common mode noise. And differential mode noise can be reduce by adding $c_x$ capacitor across the input power line, and passive element to the gate drive of switching device MOSFET to slow down the switching times. This combination of our approach is the effective way to reduce the conducted EMI and it is also a cost effective for product design

  • PDF

단속형 가변적층 쾌속조형공정과 쾌속툴링 기술을 이용한 쾌속 3차원 기능성 제품 개발에 관한 연구 (Study on Rapid Manufacturing of 3D Functional Parts Combining VLM-ST Process and Its RT Technology)

  • 안동규;이상호;김기돈;양동열
    • 소성∙가공
    • /
    • 제11권4호
    • /
    • pp.323-331
    • /
    • 2002
  • The combination of rapid prototyping(RP) and rapid tooling(RT) has a potential for rapid manufacturing of three-dimensional parts. In the present study, a new RP system transfer type Variable Lamination Manufacturing using Expandable Polystyrene Foam (VLM-ST), is proposed to fabricate net shapes of three-dimensional prototypes. Various three-dimensional parts, such as a knob shape and a human head shape, are manufactured by the VLM-ST apparatus. In addition, a new rapid tooling technology, which utilizes a room temperature vulcanizing (RTV) molding technique and a triple reverse process technique, is proposed to manufacture net shapes of three-dimensional plastic parts using the prototypes of VLM-ST. A plastic part of the knob shape is produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacture of a plastic knob within two days.

최신 금속복합재료의 연구 개발 동향 및 응용 현황 (Recent Trends and Application Status of the Metal Matrix Composites (MMCs))

  • 김효섭
    • 한국분말재료학회지
    • /
    • 제27권2호
    • /
    • pp.164-173
    • /
    • 2020
  • Metal matrix composites (MMCs), which are a combination of two or more constituents with different physical or chemical properties, are today receiving great attention in various areas, as they have high specific strength, corrosion resistance, fatigue strength, and good tribological properties. This paper presents a research review on the combination of matrix and reinforced materials, fabrication processes, and application status of metal matrix composites. In this paper, we aim to discuss and review the importance of metal composite materials as advanced materials that can be used in various applications such as transportation, defense, sports, and extreme environments. In addition, the applicability and technology development trends in new process technology fields such as additive manufacturing of metal composites will be described.

Interaction art using Video Synthesis Technology

  • Kim, Sung-Soo;Eom, Hyun-Young;Lim, Chan
    • International Journal of Advanced Culture Technology
    • /
    • 제7권2호
    • /
    • pp.195-200
    • /
    • 2019
  • Media art, which is a combination of media technology and art, is making a lot of progress in combination with AI, IoT and VR. This paper aims to meet people's needs by creating a video that simulates the dance moves of an object that users admire by using media art that features interactive interactions between users and works. The project proposed a universal image synthesis system that minimizes equipment constraints by utilizing a deep running-based Skeleton estimation system and one of the deep-running neural network structures, rather than a Kinect-based Skeleton image. The results of the experiment showed that the images implemented through the deep learning system were successful in generating the same results as the user did when they actually danced through inference and synthesis of motion that they did not actually behave.