• Asian-Australasian Journal of Animal Sciences
• /
• 제26권6호
• /
• pp.896-904
• /
• 2013

Cattle breeds have a striking effect on milk, including milk composition and technological characteristics. This study aims to compare milk composition, acidification activity, viscosity, milk dispersion system stability and casein molecular weight among three buffalo breeds in China. The technological characteristics of milk produced by three cattle breeds of river buffalo (Murrah), crossbreed 1st generation ($F_1$), crossbreed multiple generation ($F_H$, $H{\geq}3$) buffaloes were investigated. Cattle breeds showed evident effect on milk protein, fat and total solids content, but little effect on most of buffalo casein molecular weight. Milk fat, protein content and the viscosity of buffalo milk from river buffalo were lower than those of $F_1$ and $F_H$, so was the buffer capacity. The viscosity was negatively correlated to temperature and concentration. Results of stability coefficient showed that milk dispersion system had the best dynamic stability characteristics under pH 6.6 and 6 times dilution, while zeta potential of Murrah milk was slightly higher than that of hybrid offspring ($F_1$, $F_H$). SDS-PAGE results showed that buffalo ${\alpha}_s$-casein had a slightly faster mobility than standard ${\alpha}_s$-casein; while buffalo ${\beta}$-casein showed a slightly slower mobility than standard ${\beta}$-casein. There is no clear differences in molecular weight of ${\alpha}_s$-, ${\beta}$-, and ${\kappa}$-casein among Murrah, $F_1$ and $F_H$.

• Advances in environmental research
• /
• 제5권3호
• /
• pp.189-200
• /
• 2016

This study aimed at advanced oxidation of hetero tri-functional reactive dye Acid orange 7 using photo-Fenton conditions in a lab-scale experiment. Decolourisation of Acid Orange 7 dye by Fenton's process was dependent on concentration of Hydrogen peroxide, Ferrous sulphate, pH, and contact time. A $2^3$ factorial design was used to evaluate the effects of these key factors: pH, Fe(II), and $H_2O_2$ concentration, for a dye concentration of 50 mg/L with COD of 340 mg/L at pH 3.0. The response function was removal of colour under optimised conditions; pH 3.0, [Fe(II)] 40.83 mg/L, [$H_2O_2$] 4.97 mmol/L; 13.6 min. of treatment resulting in 100% colour removal. The final COD of treated wastewater was nil suggesting that AOP is a potentially useful process of color removal and dye degradation/mineralisation of effluent having AO7. Minimum contact time for complete decolourisation was at 5 mmol/l $H_2O_2$ concentration. Increase in $FeSO_4$ (mg/l) concentration resulted in decrease of time for complete decolourisation. Box-Behnken Design was used to optimize the process variables. Maximum and minimum levels of pH (3-5), $H_2O_2$ (4-6 mmol/l), $FeSO_4$ (30-46 mg/l) and contact time (5-15 minutes) were used. The statistical analysis revealed a value of 0.88 for coefficient of regression ($R^2$) indicating a good fit of model. Calculated F-value was found higher than the tabulated value confirming to significance of the model. Based on student's t-test, Ferrous sulphate, pH, and contact time have a positive effect on the percent decolourisation of Acid Orange 7.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.681-692
• /
• 2020

Conventional Piezoelectric Energy Harvesters (CPEH) have been extensively studied for maximizing their electrical output through material selection, geometric and structural optimization, and adoption of efficient interface circuits. In this paper, the performance of Stepped Piezoelectric Energy Harvester (SPEH) under harmonic base excitation is studied analytically, numerically and experimentally. The motivation is to compare the energy harvesting performance of CPEH and SPEHs with the same characteristics (resonant frequency). The results of this study challenge the notion of achieving higher voltage and power output through incorporation of geometric discontinuities such as step sections in the harvester beams. A CPEH consists of substrate material with a patch of piezoelectric material bonded over it and a tip mass at the free end to tune the resonant frequency. A SPEH is designed by introducing a step section near the root of substrate beam to induce higher dynamic strain for maximizing the electrical output. The incorporation of step section reduces the stiffness and consequently, a lower tip mass is used with SPEH to match the resonant frequency to that of CPEH. Moreover, the electromechanical coupling coefficient, forcing function and damping are significantly influenced because of the inclusion of step section, which consequently affects harvester's output. Three different configurations of SPEHs characterized by the same resonant frequency as that of CPEH are designed and analyzed using linear electromechanical model and their performances are compared. The variation of strain on the harvester beams is obtained using finite element analysis. The prototypes of CPEH and SPEHs are fabricated and experimentally tested. It is shown that the power output from SPEHs is lower than the CPEH. When the prototypes with resonant frequencies in the range of 56-56.5 Hz are tested at 1 m/s2, three SPEHs generate power output of 482 μW, 424 μW and 228 μW when compared with 674 μW from CPEH. It is concluded that the advantage of increasing dynamic strain using step section is negated by increase in damping and decrease in forcing function. However, SPEHs show slightly better performance in terms of specific power and thus making them suitable for practical scenarios where the ratio of power to system mass is critical.

• Wind and Structures
• /
• 제12권1호
• /
• pp.49-61
• /
• 2009

A method is presented to estimate the form drag and the base pressure on a triangular cylinder in the presence of blockage effect. The Strouhal number, which is found to increase with the flow constriction experimentally by Ramamurthy & Ng (1973), may be decoupled from the blockage effect when re-defined by using the velocity at flow separation and a theoretical wake width. By incorporating this wake width into the momentum equation by Maskell (1963) for the confined flow, a relationship between the form drag and the base pressure is derived. Independently, the experimental data of surface pressure from Ramamurthy & Lee (1973) are found to be independent of the blockage effect when expressed in terms of a modified pressure coefficient involving the pressure at separation. Using the potential flow model by Parkinson & Jandali (1970) and its subsequent development in Yeung & Parkinson (2000) for the unconfined flow, a linear relation between the pressure at separation and the form drag is formulated. By solving the two equations simultaneously with a specified blockage ratio and an apex angle of the triangular cylinder, the predictions of the drag and the base pressure are in reasonable agreement with experimental data. A new theoretical relationship for the Strouhal number, pressure drag coefficient and base pressure proposed in this study allows the confinement effect to be appropriately taken into consideration. The present approach may be extended to three-dimensional bluff bodies.

• Asian Journal of Business Environment
• /
• 제8권2호
• /
• pp.15-22
• /
• 2018

Purpose - It is important to figure out the relationship between tourism carbon emissions and tourism economics for a healthy tourism development. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. Tourist consumption stripping coefficient is used to calculate tourism carbon emissions. SBM-Undesirable model is used to measure the efficiency of tourism economics under the constraint of tourism carbon emissions. Results - The results show that: during the year of 2005-2015, there are obvious differences in totals and intensities of tourism carbon emissions among 27 provinces and cities which can be divided into three areas. There is a high possibility of underestimating the actual efficiency of tourism economics by leaving tourism carbon emissions out of account, and a high inefficiency caused by tourism carbon emissions will lead a low efficiency of tourism economics. Conclusions - The development of tourism should give consideration to both economic and environmental benefits, and reduce the inefficiency caused by tourism carbon emissions to improve efficiency of tourism economics by improving the level of technical efficiency and promoting technological progress.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.253-258
• /
• 2005

This paper presents characteristics of CrOx thin-film, which were deposited on $Al_2$O$_3$ wafer by DC reactive magnetron sputtering in an argon-oxide atmosphere for high temperature applications. The present paper deals with a study of the technological characteristics of thin film resistors to provide a control in obtaining temperature coefficients of resistance of given value. The optimized condition of CrOx thin-film were thickness range of 2500 $\AA$ and annealing condition(350 $^{\circ}C$, 1 hr) in oxide partial pressure(3.5${\times}$10$^{-4}$ torr). Under optimum conditions, the CrOx thin-films is obtained a high resistivity, p=340 $\mu$Ωcm, a low temperature coefficient of resistance, TCR=-55 ppm/$^{\circ}C$. The CrOx thin films resistors which were fabricated in this paper had excellent characteristics as high precision resistors.

• Smart Structures and Systems
• /
• 제11권4호
• /
• pp.349-364
• /
• 2013

Recently, researchers in the field of structural health monitoring (SHM) have been rigorously striving to replace the conventional NDE techniques with the smart material based SHM techniques, employing smart materials such as piezoelectric materials. For instance, the electromechanical impedance (EMI) technique employing piezo-impedance (lead zirconate titanate, PZT) transducer is known for its sensitivity in detecting local damage. For practical applications, various external factors such as fluctuations of temperature and loading, affecting the effectiveness of the EMI technique ought to be understood and compensated. This paper aims at investigating the damage monitoring capability of EMI technique in the presence of axial stress with fixed boundary condition. A compensation technique using effective frequency shift (EFS) by cross-correlation analysis was incorporated to compensate the effect of loading and boundary stiffening. Experimental tests were conducted by inducing damages on lab-sized aluminium beams in the presence of tensile and compressive forces. Two types of damages, crack propagation and bolts loosening were simulated. With EFS for compensation, both cross-correlation coefficient (CC) index and reduction in peak frequency were found to be efficient in characterizing damages in the presence of varying axial loading.

• 대한화학회지
• /
• 제54권5호
• /
• pp.523-532
• /
• 2010

제안된 방법은 국제표준(IS)인 Entacapone-d10(EAD10)을 사용하여 체외에서 Entacapon(EA)의 정량화를 위한 간단하고, 감도가 좋고, 명확한 액체 크로마토그래피-직렬 질량 분석법(LC-ESI-MS/MS)이다. 크로마토그래피 분리는 Zorbax SB-C18에서 수행되었고, $2.1{\times}50\;mm$, $5\;{\mu}m$ 컬럼과 10 mM Ammonium formate (pH 3.0)로 구성된 이동상에서 수행되었다: 0.7 mL/min 유속의 아세토나이트릴(60:40 v/v)은 액체-액체 추출을 따른다. EA와 EAD10은 다중 반응 탐색법(MRM)에서 수소부가물을 가지고 상대적으로 포지티브 모드인 m/z $306.1{\rightarrow}233.1$과 $316.3{\rightarrow}233.0$에서 수소부과물을 가지고 측정되었다. 그 방법은 상관계수($r^2$) 0.993 이상을 갖는 1.00 - 2000.00 ng/mL의 선형 농도 범위 이상으로 입증되었다. 하루 중과 하루 이내에 3.60에서 7.30과 4.20에서 5.50% 이내의 정밀성과 97.30에서 104.20과 98.30에서 105.80% 이내의 정확도는 EA를 위해 입증되었다. 이러한 방법은 건강한 인도인 자원자들의 생물학적 동등성 연구에서 성공적으로 적용되었다.

• 한국전자거래학회지
• /
• 제17권2호
• /
• pp.63-72
• /
• 2012

2000년대 초반부터 한국의 이동통신시장은 급속하게 팽창해 왔으며, 최근 들어 그 성장 속도가 둔화되고 있으나 성장은 계속 진행 중에 있다. 이와 같은 환경에서 4세대 이동통신 서비스가 2011년 10월부터 시작되어 3세대 서비스와 4세대 서비스가 함께 존재하고 이를 통해 이동통신시장의 경쟁구도가 더욱 복잡하고 치열한 상황이 되었다. 본 연구는 다세대 확산 모형을 활용하여 3세대 및 4세대 이동통신 서비스 가입자 규모를 예측하는데 목적이 있다. 이를 위해 세 개의 파라미터, 즉 Norton and Bass 모형[11]에서 사용되는 혁신계수, 모방계수 및 포화수준계수의 값을 추정하기 위해 3세대에서 4세대로 대체되는 서비스 대체의 유사 사례를 역추적하는 방법을 사용하였다. 시뮬레이션 결과, 다세대 확산모형과 유사사례 추론을 통해 신규서비스인 4세대 이동통신서비스 시장규모를 성공적으로 예측할 수 있었다는 결론을 얻었다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.257-261
• /
• 1997

Patents often serve as leading indicators of technological change. This patenting activity reflected R&D (Research & Development) of new technology. The purpose of this study is to set up a forecasting model that anticipate the number of domestic patent applications and the number of patents granted relating to R&D inputs (R&D expenditure, R&D manpower) at the level of three industrial sectors in Korea : electrical-electronic, machinery, chemical etc. In this study, forecasting models were used trend extrapolation and a set of regressions. Both Theil's inequality coefficient and MAE(Mean Absolute Error) were utilized to test the precision of predicted value. The patent data and the R&D data were based on Indicators of Industrial Technology data throught 1980 to 1996. The major results obtained in this study are as follows (1) The regression model is more useful for forecasting the trends of the number of patent applications and patents granted than the trend extrapolation method. (2) The variance of Theil's inequality is smaller in patent applications than in patent granted.