• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.69-77
• /
• 2017

This paper introduces an optical encoder using the reflection in the slit. The digital optical encoder is a sensor to generate a pulse according to the displacement. An optical encoder is composed of 3 parts: light source, slit plate and light-receiving element. In a conventional encoder, one slit produces one signal. The resolution of the digital optical encoder is determined by the number of slits in the encoder plate. The small slit size is most important among the factors that determine the resolution in a generic-type optical encoder. However, a small slit has low productivity and technical difficulties, so analog optical encoders have emerged as an alternative. Nonetheless, this alternative requires additional circuitry and equipment because of the noise and drafts in the analog signals. A new sensor is presented in this paper with a high resolution and a slit of the same size using the reflection in the slit. Then, the path of the light that passes through the slit ccording to the shape was analyzed, and some paths were expressed in the mathematical expressions. In addition, the optical paths were analyzed in the rectangular, octagonal, and circular encoders, and shown the obtained number of signals per slit by using them. Thus, we confirm that this method has the best performance in circle-shaped slits.

• 수산경영론집
• /
• 제43권2호
• /
• pp.79-94
• /
• 2012

The purpose of this study is to investigate the production efficiencies of the Korean aquaculture fishery with respect to species and methods using a Data Envelopment Analysis. The study extracted the 8 fishes in each of the sea cage culture, aquarium basin, and enclosed aquaculture for the analytical purposes. First, the study estimated the technical, pure technical, and scale efficiencies of the total of 24 aquaculture fishes based on the traditional DEA under the assumptions of both CRS and VRS. 2 fishes were identified as the efficient DMUs under the CCR-model, and 6 fishes under the BCC-model. Second, we tested to see if there was any difference in production efficiencies regarding those three different methods of aquaculture. we could not find any evidence of the differences in efficiency using a rank sum test based on the traditional DEA. However, we could do find that the pure technical efficiency in the sea cage culture was lower than others at 1% level of significance and the pure technical efficiency in enclosed aquaculture was also lower than others at 5% level of significance using Bilateral-DEA, which could explicitly consider the heterogeneity in the 3 production methods of aquaculture. Finally, the study obtained the 95% confidence intervals of the efficiency scores for the 24 fishes under our study using the smoothed bootstraping method in the process of the re-sampling in cooperation with both a kernel density estimation and a reflection method. At the same time, we could estimate the bias-corrected efficiency scores while the traditionally estimated efficiency scores suffered from the biases in the process of solving a linear programming with the deterministic nature of a production frontier. And hence, we could distinguish the differences in production efficiencies of the 8 fishes with respect to those 3 methods of aquaculture.

• 대한전자공학회논문지SP
• /
• 제48권3호
• /
• pp.1-12
• /
• 2011

대형 멀티터치스크린의 구현은 기존의 저항막, 정전용량, 초음파 방식으로는 기술 제약 및 비용 등의 문제로 구현에 어려움이 있어 주로 적외선을 이용하는 방식을 많이 사용한다. 적외선을 사용한 멀티터치스크린은 대형스크린을 구현하기 용이하지만 멀티터치에 기술적인 제한을 갖고 있는 경우가 많다. 이러한 단점을 보완하기 위해 적외선 카메라를 이용한 FTIR(Frustrated Total Internal Reflection), DI(Diffuse Illumination)방식들이 Microsoft의 차세대 유저인터페이스인 Surface를 통해 제안되었다. FTIR이나 DI 방식은 대형스크린의 구현이 쉽고 멀티터치의 개수에 제한을 받지 않는다. 하지만 FTIR은 터치 포인트의 검출은 쉬운 반면에 스크린의 크기와 재질, 적외선 LED 배열을 위한 모듈, 많은 소비전력 등의 단점을 가지고 있고 DI 방식은 구조상의 문제로 터치 검출이 어려운 반면 FTIR이 가지고 있는 단점을 해결할 수 있다. 본 논문에서는 기존에 제안된 DI 방식의 터치 포인트 검출시의 문제점을 해결하기 위해 손가락 외곽선을 이용한 영상처리 알고리즘, 광학 렌즈 왜곡 현상을 효과적으로 보정하기 위한 알고리즘에 대해 연구하였다. 또한 멀티터치의 터치 정확도를 높이기 위한 Calibration 알고리즘과 정확한 제스처 및 정확한 이동을 위한 Tracking 기법을 고안하였다. 연구 결과 DI 방식을 위해 본 논문에서 제안한 영상처리 알고리즘들은 간단하면서 쉽게 대형 멀티터치스크린 구현을 위한 효과적인 방법이 될 수 있을 것으로 판단된다.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.73-83
• /
• 2002

Gloss is very important optical property influencing the perceived quality of the paper surface as well as the surface after printing. Although the average gloss level of paper products or printed images is important to meet end use specifications, the occurrence of gloss mottle, or non-uniformity of gloss, is often of greater concern for meeting quality requirements, especially for the high gloss paper. Gloss variation originates from the irregularities of paper surface, especially surface roughness of paper. Roughness of paper can be divided into micro-roughness (under $1\mu m$ scale in variation) and macro-roughness (over $1\mu m$ scale in variation) depending on the scale of the irregularities. A clearer understanding of the gloss variation of paper can be achieved by separating the contributions of these two scales of roughness, and characterizing them independently. In order to do this, a novel gloss measuring method was introduced. This can detect local gloss with very high resolution. The effect of macro-roughness on gloss variation, which was identified by the measurable surface topography, was separated from the total gloss variation by using this method. The effect of micro-roughness was then estimated indirectly. The local gloss variations of various paper samples were then evaluated to demonstrate the utility of this approach.

• 대한공업교육학회지
• /
• 제42권1호
• /
• pp.1-29
• /
• 2017

1970년대 산업화에 의한 숙련기술인력 수요의 급속한 팽창 및 이와 더불어 추진된 숙련기술인력 양성정책에 힘입은 공업교육은 산업변화와 더불어 변화하고, 필요한 인력을 육성하는 가운데 오랜 정체 상태를 벗어나게 되었다. 이후 공업교육은 국가 경제 정책에 종속됨과 이로부터 벗어남을 반복하며, 부침을 거듭해 왔다. 산업화, 정보화, 지식경제화의 영향에 의한 변화의 격랑 가운데 공업고교 교사로 산다는 것은 무엇일까? 지속된 변화의 와중에서 그들은 무엇을 지키고자 하였으며, 어떤 교사가 되고자 하였을까? 이를 탐구하려는 것이 이 연구의 배경이다. 본 연구의 목적은 공업계 고등학교 기계과 교사의 생애사 연구를 통해 다음 두 가지 문제를 탐구하는 것이다: 기계과 교사로서 겪은 주요한 경험은 무엇인가? 사회와 학교교육 변화의 맥락 속에서 그들의 직업정체성은 어떻게 변화, 형성되었는가? 연구목적을 달성하기 위하여 공업계 고등학교 기계과 교사로서 1970년대에 교직에 입문하여 40년 가까이 그 자리를 지킨 2인을 연구참여자로 선정하여 심층면담을 실시하였고 이를 녹취하여 분석하였다. 심층면담을 통해 얻은 자료 외에 연구참여자의 인사기록카드, 각종 수상기록, 언론기사 등도 분석하였다. 연구 결과 공업계 고교 기계과 교사가 겪은 주요한 교육적 경험은 (1)자격증 취득을 위한 교육 (2)기능반 지도교사 경험 (3)공고 교육의 혁신 경험 (4)새로운 분야에 대한 학습 (5)공업고등학교의 급격한 위상변화에 대한 경험 (6)실습장을 유지관리, 안전사고 예방 경험 등이었다. 공업계 기계과 교사의 교직 경험에 따른 직업정체성은 (1)정체성 표류 (2)정체성 안정 (3)정체성 전환 (4)정체성 유보 (5)정체성 승화 (6)정체성 통합의 과정을 거치면서 형성되고 발달하였다.

• 비파괴검사학회지
• /
• 제13권1호
• /
• pp.21-28
• /
• 1993

If the infinitesimal delamination exists and the two waves can hardly be distinguished from each other on account of being much closer, we cannot measure the thickness of delamination by the time difference method. On this study, we calculated the thickness of infinitesimal delamination model by means of measuring echo height due to the deflection of material particles and utilized Newton Ring for optical measurement as a delamination model. From the result of Newton Ring expressed in the delamination model, we can calculate the infinitesimal delamination thickness up to $0.2{\sim}0.3{\mu}m$ due to the difference of acoustic impedance by the ratio of the echo height to the total reflection.

• 한국생활과학회지
• /
• 제18권1호
• /
• pp.41-53
• /
• 2009

The purposes of this study are to search for counselor's change process and factors in Theraplay, and to explore how they are changed into experts. This study used a method of qualitative study to reveal a concrete context of child counseling. The results are as follows. Therapist or counselor subjects realized that therapy(counseling) was not focusing on activities, but on meanings. In the beginning, therapist subjects acted according to the situation rather than according to the child's reactions and their own strategy. It was expressed into long and boring explanations, trials to flatter a child. Therapist subjects were often depressed because of their incompetence, they even did overpraise for the undistinguished behavior of children, but gradually they have changed into expert therapists through ceaseless interaction with Theraplay community, reflection, trial and practice.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.705-708
• /
• 2009

For the Gas hydrate Research and Development in Korea, the prospect area I & II was surveyed and drilled during the first phase. At the result, we succeeded to discovering gas hydrate real sample at BSR reflection and vent structure. This expedition processing contributes to developing the offshore seismic survey technologies and data processing of Korea. But Korean gas hydrate test production research, in spite of activating test production at other countries, is such a limitation about technician, GH production technologies and E&P processing. First of all, there is no exist in Korea to application site for the their production research results. In this paper, we have studied the gas hydrate reservoir selection technics of the DOE & BPXA for the ANS test production. And this result will helpful to preparation of gas hydrate test production in Korea.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.218-223
• /
• 2000

In the last years by the recognition and social capital maintenance of join local people of importance of bridge scenery and design we have get new business, and we have real understood the reflection which be given to the users sensitivity engineering science. We make as object the bridge and subject the design and with questionnaire we make an examine. we made verification of each different judgment. we applied the social capital maintenance into the sensitivity engineering science and discuss about how we can tie the design.

• 상하수도학회지
• /
• 제30권5호
• /
• pp.597-604
• /
• 2016

This study was begun with the object of actively reflection the rapid technological advancements of the electronical control and mechanical control industries to sewage disposal methods. Or focuses on applying a flow control method that utilizes inverters and automatic valves to sewage treatment process systems. This study proposes that sewage treatment process systems architects must acquire a certain degree of technical skills in the areas of electrical and mechanical controls in order to raise the standard of completeness of sewage treatment process systems. And further emphasizes that there is required continuous research on automatics valves that are used in sewage treatment.