• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.767-773
• /
• 2011

The purpose of this study was to investigate the possibility of an alternative fuel resource by incinerating a mix of combustible MSW (municipal solid waste) and offals after separating recyclable material at the MRF (material recovery facilities) location. We analyzed the physical and chemical properties including the 3-contents, the calorific value, and chemical compositions of the separation rejects in MRF, and compared the results with combustible MSW. Moreover, we experimented the trend of combustible properties and the concentration change of air pollutants at mixed incineration in the MSW incinerator. According to the results of the experiment, the separation rejects showed higher heating value (5,865 kcal/kg), and lower moisture and ash content than combustible MSW. Since we have incinerated MSW in the MSW incinerator mixing the offals at 30% and 50% respectively, we know that the change of the concentration of dust, $SO_2$, $NO_2$, and CO did not appear significant, and not exceed the pollutants emission regulation. But, considering the enhancement of the HCl emission concentration (max. 33.7 ppm) at the co-incineration of the 50% offals, we believe that the proper mixing ratio of the separation rejects would become within 30%.

• The Journal of Society for e-Business Studies
• /
• v.20 no.2
• /
• pp.107-123
• /
• 2015

Internet of Things (IoT) is being globally spotlighted as a fundamental technology to realize hyper-connected society, and as new growth engines of nation and enterprises. Although the technical aspect of IoT receives a great deal of attention as a new business opportunity, the business aspect of IoT is suffering insufficient scholarly research and objective insight. Thus, the business aspect of IoT requires a thorough research on its service market and business opportunities. In order to stimulate the IoT service market and facilitate objective statistic data aggregation, this paper aims to suggest an IoT service categorization model. This model is comprised of three perspectives which are IoT purpose, IoT Player, and IoT Domain; they function as tools to comprehensively analyze the IoT industry. Efficacy of this model has been confirmed by simulating 117 IoT services on the model, in which the results successfully offered the market trend of the IoT service based on Case. This study is able to apply for basic research of IoT-Service Development Plan, and provide practical implications.

• Journal of Digital Convergence
• /
• v.16 no.6
• /
• pp.187-195
• /
• 2018

Recently, the 4th industrial revolution has emerged as the core for enhancing national competitiveness, the development of a technology roadmap to efficiently develop related technologies to realize super intelligence as a main feature of the 4th Industrial Revolution is a major task has been highlighted. The objective of this study is to analyze the domestic and foreign technology level in the artificial intelligence field which is the core technology of the 4th Industrial Revolution era and to present the direction of development based on this. The keyword network analysis and the blank technical analysis based on the IPC classification were performed on the data derived from the keyword search of 'AI (Artificial Intelligence)' among domestic and foreign patent data. As a result, the number of domestic artificial intelligence related technology development was 1.2% compared with developed countries such as USA and Europe. In the major development fields, data recognition technology and digital information transmission technology were relatively insufficient. Through this study, we obtained the blank technology as a result of comparative analysis of domestic artificial intelligence related technologies compared to advanced countries and suggested the direction of domestic artificial intelligence technology development in future.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.1
• /
• pp.73-84
• /
• 2020

Recently, there has been a change in consumer culture. The paradigm is changing from a consumption model that used to emphasize rationality to an ethical consumption model that focuses on sustainability. Such a change in consumption patterns has also been seen in the cosmetics industry, but studies to empirically assess this trend are incomplete. Therefore, the purpose of this study is to empirically identify the impact of ethical consumption proprieties on attitudes and purchasing intentions for ethical cosmetics. To achieve the aim of this study, 506 adult women residing in Korea were selected as subjects and surveyed. To identify the demographic characteristics of the study participants, a technical statistical analysis and frequency analysis were conducted. To check the validity and reliability of the measuring tools, an exploratory factor analysis was performed, and the Cronbach's α factor was calculated. The analysis method was analyzed using the SPSS 25.0 and the Amos 25.0 statistical analysis programs. The results of this study are as follows. First, ethical spending tendencies had a positive impact on attitudes toward ethical cosmetics. Specifically, interest in ethical issues, altruism, and business ethics perception have had a positive impact on attitudes toward ethical cosmetics. However, consumer effectiveness had no significant impact on attitudes toward ethical cosmetics. Second, attitudes toward ethical cosmetics had a positive effect on purchasing intentions. This study found that for the spread of ethical cosmetics and ethical consumption trends varied according to the age and that attitudes toward ethical cosmetics and differences in purchasing intentions should be kept in mind. It also showed that attitudes toward ethical cosmetics affect purchasing intentions. The results of this study suggested that the analysis of adult women, the main consumers of cosmetics, by age was meaningful for finding the factors for growth in the macroscopic ethical cosmetics industry and that the industry could raise its ethical awareness. If such tasks are systematically established, ethical cosmetics are thought to be able to actively solve social problems and lead a mature cosmetics industry.

• Culinary science and hospitality research
• /
• v.15 no.3
• /
• pp.356-372
• /
• 2009

The purpose of this study is to study academic tendency in the researches on the service quality of Korean restaurants by analyzing the studies related to the service quality of Korean restaurants. As a result of this study, the studies related to the service quality of Korean restaurants, included in 7 academic journals selected, are totally 26 articles. Among them, there are 14 researches targeting medium-large size Korean restaurants with more than 100 seats. In the methodological aspect, the scales, which were used most frequently in measuring the service quality of Korean restaurants, were indicated to be SERVQUAL in Parasuraman et al.(1988), DINESERV in Stevens et al.(1995) and Brady & Cronin(2001)'s scale. Also, as a result of examining the tendency of researches related to the service quality in Korean restaurants in the contextual aspect, the interaction quality between employees and customers out of customers' perceived service quality was surveyed to have greater influence upon customers' behavioral reaction than the physical quality or technical quality. Consequently, in order to conduct an institutional research through examining the service quality in Korean restaurants, understanding the customers' perceived service quality needs to be implemented preferentially with a systematically verified scale. Moreover, such researches on the service quality of Korean restaurants appear to focus on specific subjects. Thus, in order to escape from this tendency, it is necessary to explore creative research subjects and design diversely and scientifically analytical methods.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.619-625
• /
• 2008

The effects of thermal cycling on residual stresses in both inorganic passivation/insulating layer that is deposited by plasma enhanced chemical vapor deposition (PECVD) and organic thin film that is used as a bonding adhesive are evaluated by 4 point bending method and wafer curvature method. $SiO_2/SiN_x$ and BCB (Benzocyclobutene) are used as inorganic and organic layers, respectively. A model about the effect of thermal cycling on residual stress and bond strength (Strain energy release rate), $G_c$, at the interface between inorganic thin film and organic adhesive is developed. In thermal cycling experiments conducted between $25^{\circ}C$ and either $350^{\circ}C$ or $400^{\circ}C$, $G_c$ at the interface between BCB and PECVD $ SiN_x $ decreases after the first cycle. This trend in $G_c$ agreed well with the prediction based on our model that the increase in residual tensile stress within the $SiN_x$ layer after thermal cycling leads to the decrease in $G_c$. This result is compared with that obtained for the interface between BCB and PECVD $SiO_2$, where the relaxation in residual compressive stress within the $SiO_2$ induces an increase in $G_c$. These opposite trends in $G_cs$ of the structures including either PECVD $ SiN_x $ or PECVD $SiO_2$ are caused by reactions in the hydrogen-bonded chemical structure of the PECVD layers, followed by desorption of water.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.238-246
• /
• 2016

The study aims to examine Japan's National REDD+ Strategies prepared for Post-2020 and the status of its implementation by organizations in Japan, and then to suggest the potential REDD+ countermeasures against Joint Credit Mechanism (JCM) for Republic of Korea and their implications. As for the technical limitations of the guidelines of REDD+ under the JCM, it is pointed out that forests located at the place with less potential safeguard intervention tend to be selected as the target area for a project and that, as reference emission trend changes depending on the basic year of the baseline, differences could occur among the amounts of greenhouse gas emission. In addition, it is pointed out that the result of the calculation of the displacement of emissions, or leakeage, in REDD+, can have an uncertainty, since the calculation is done by just multiplying leakage area by certain coefficients, without considering the size of the leakage area. Furthermore, the lack of implementation guideline or methodologies for a project level is also pointed out as a limitation, considering that there are only some national and sub-national monitoring guidelines at present. Finally, internationally accepted guidelines for safeguard and its sub-items needed to be prepared, as current safeguard policy only includes lists without detailed items. Such things mentioned above are all related to, and can lead to the problem of double counting of items in Nested Approach etc., as well as of the distribution of credits. Therefore, Republic of Korea should take these into consideration when implementing its REDD+ projects.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.121-142
• /
• 1995

The Expressionism took shape in the early twentieth century, so called as the time of change and innovation which intermediated between the time of extreme prosperity and peace and the time of disruption. This study is based on the wide sense of Expressionism out of various concepts of Expressionism. The afore-mentioned phenomenon was emphasized all the more in the French Expressionism and it is the most important and substantial object in the Art to make a direct transference of emotion , feeling and thought and it could be regarded as one of characteristics of the French Expressionism . In Addition, the Expressionism produced " Aesthetics on Ugliness "Aesthetics des H lichen )" in creating work of art. It was an expression of the Existentialism based on Humanism for modern people who lived at time of nihility and such artistic movement accepted polarity and ambivalance concepts claimed by Nietzsche into three specific fields in accordance with thought and technique in the work of art and those are the Intuitional Expressionism. Cubistic Expressionism and Fantastic Expressionism. This study makes a close analysis of costume style trends on the basis of the categorized Expressionism enumerated as above. The characteristics of Intuitional Expressionism is that poverty and a sense of alienation dominated all society and thus the social reality brought a trend of social participation . This social reality effected significantly modern costume style and a reformative costume turned up at last . This reformative costume was classified into Gar onne look, Military look and Lingerie look by characteristics of style in order to make a close examination for the relationship between social reality and the reformative structure. Cubistic Expressionism effected costume forming and changed costume style through " Deformation " and " Distortion" in forming technique , and also it has developed geometrical style of costume, which could be symbolized by mechanism. And on the other hand, this Cubistic Expressionism has emphasized exaggerated expression ability to produce rigid and stiff style of costume. Fantastic Expression pursued basic artistic worth from the primitive and ethnic customs and accepted fantastic oriental Exoticism . This Fantastic Expressionism effected costume style of twentieh century and such designers as Lon Bakst, Paul Poiret, Elsa Schiapareli adopted intentive primary color. It also applied " Depaysment" to modern costume style , which introduced avant-garde design to give an impact through destruction of the existing traditional concept. This study also analized seven major representative costume designers of the early twentieth century. They are L on Bakst, Paul Poiret, Madeline Vionnet, JeanPatou, Gabriel Chanel and Elsa Schiaparelli. These designers deployed creative costume design work with peculiar expression technique based on the French expressionism. The costume study related to art history was so far made mostly to approach costume forming but only a few study is found to have approached idealistic background of art history in connection with creating costume. From that point of view, it is profoundly significant for this study to analize idealistic background and characteristics of Expressionism and relationship between costume and expressionism and to examine modern costume of twntieth century in conjunction with technical characteristics and spiritual sense of Expresionism.eristics and spiritual sense of Expresionism.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.4
• /
• pp.135-151
• /
• 2007

A 5 days working system and a 6 days working system will be put in force at a food service consumption behavior of company workers. As a 5 days working system have adopted company, which the number of employee is more than 50, from July 1, 2007. The purpose of this paper is to study the In food service consumption behavior of company workers. There is no doubt that it is only way of surviving In current society to analyze the change of social situation and actively cope with the development. Especially, in the field of restaurant industries, they have to be equipped with a great store of experience and skill, theory and practical business, pertinent and rapid disposal. Consequently, it is very important to know the objective and practical knowledge for the restaurant industries trend by having a through grasp of the need of consumer and their propensity to consume. In order to study motives of eating-out and restaurants selection, office workers, who live in the national capital region, are interviewed. The period of interview is from Oct 1 to Nov 20, 2007. According to the result of interview, The most workers prefer to eating-out on week with family and friends. But family is eating-out the more preference to weekend compare to friends. And it is deduced that restaurant near tourist resorts or outside the city rather than in downtown will be prosperous with this result. That is to say, workers go out to eat delicious food regardless of traffic problem and distance, with the increase of national income and the car holding. This paper is worthy of notice in terms of trying to find the relevance between the working system and the restaurant industries development. In after research, I expect the more synthetic and deeper study should be made though the more technical methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.185-194
• /
• 2012

Deepwater oil is becoming more attractive because most onshore and shallow water oil is developing or developed. With the on-going trend to deepwater oil developments, flow assurance problems which prevent oil flow from reservoir to processing facilities are becoming an issue because deposited material can be occurred in case oil is exposed to very different environment from reservoir. Wax deposition which is one of flow assurance problems can be a major technical and economic issue because it is very sensitive to temperature. In order to predict and mitigate wax problems, the precise measurement of wax appearance temperature (WAT) which is the starting temperature of wax precipitation is very important. Various methods have been suggested for WAT measurement of opaque oil because there is no standard method for opaque oil. In this study, the WAT of opaque oil samples was measured using viscosity measurement method, differential scanning calorimetry, filter plugging method, and pressurized filter plugging method. Wax deposition test and high temperature gas chromatography analysis were applied to verify measured WAT. As a result of study, the WAT of opaque oils was successfully measured and verified. If WAT measurement methods of opaque oil related to oil characteristics is systematized using the results of this study, it can be a valuable tool for WAT measurement of opaque oil and flow assurance related to wax deposition.