• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1346-1348
• /
• 2004

In this paper, Traction system and electric devices of double deck is designed to examine technical reasonableness for driving on the ground and underground. Other countries's double decks is considered. For designing the electric devices, two accelerations are considered and design criterion are given.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.334-337
• /
• 1996

This is a paper intended for initial stage of vehicle modeling and design. The needs to determine a variety of vehicle suspension parameters required for initial design has been difficult and time-consuming task. In order to facilitate a concise and efficient presentation of initial vehicle design procedure, this paper uses a mathematical model and physical geometry. Vehicle model consists of dimensions, inertias and mechanical constants. These vehicle model parameters divided into several categories : basic parameters, coefficients and constants, design specification, spring and damper, bush stiffness, stabilizer bar, suspension geometry, tire, and vehicle weights of various design condition. This paper uses a vehicle design fundamental (VDF) program running under Windows 95 graphical interface. The features of VDF will be briefly outlined in this paper.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.294-295
• /
• 2006

최근 전력 계통 분야에서 통합화, 자동화가 활발히 이루어지고 있다. 그래서 기존의 전기장비들이 통신 기능을 갖는 마이크로 프로세스 기반의 ED(Intelligent Electronic Device)로 대체하게 되었고 이로 인해 IEC61850기반의 IED구현에 대한 관심이 급증하고 있고 활발히 진행되고 있다. 단일 표준화가 이루어지기 전 다양한 프로토콜의 사용에 따른 호환성 결여 문제를 IEC61850을 통해 해결할 수 있게 되었다. 이로 인하여 기존 기술규격 또한 달라져야 한다. 본 논문은 1차 설비와의 인터페이스 및 통신장치들이 IEC61850적용을 위해 갖추어야 하는 IED반의 기술적인 요구사항들을 검토하고 언급하였다.

• Journal of applied mathematics & informatics
• /
• v.4 no.1
• /
• pp.63-82
• /
• 1997

In experimental situations where n two or three level fac-tors are involoved and n observations are taken then the D-optimal first order saturated design is an $n{\times}n$ matrix with elements $\pm$1 or 0, $\pm$1, with the maximum determinant. Cononical forms are useful for the specification of the non-isomorphic D-optimal designs. In this paper we study canonical forms such as the Smith normal form the first sec-ond and the jordan canonical form of D-optimal designs. Numerical algorithms for the computation of these forms are described and some numerical examples are also given.

• Proceedings of the Technology Innovation Conference
• /
• 2000.06a
• /
• pp.153-173
• /
• 2000

This study is focused on measuring levels of science and technology aspect of ten strategic items in korea to serve as a guidance for the government R&D policy-making, and provide appropriate information for promoting the national R&D programs. The survey of the precise technology level for study applies functional and technical parameters. Functional parameters are used for measuring technology level of the specification and performance of emerging items such as 256M DRAM, TFT-LCD ect. in the present and / or near future; technical parameters, the element / core technologies on emerging items. The study suggests that the result of the survey should be applied for strategic technology planning to narrow the technology gap and draw the criteria for resource allocation in national R&D programs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.73-79
• /
• 2008

The permanence is of great importance to library and archival paper. According to the established standardizations including ISO and ANSI, the permanence can be specified with tear strength, pH, alkali reserve and kappa number. In this study, we evaluated the permanence and durability of domestic coated and copy paper grades. Two types of coated paper grades and all kinds of copy papers which were tested in this study were satisfied with the criterion of permanence specification. However, all of the tested paper grades didn't meet the requirements of durability because of their low folding endurance.

• Journal of the Korean housing association
• /
• v.8 no.3
• /
• pp.219-230
• /
• 1997

Lack of technical standards, specification and inadequate execution in masonry wall construction in Korea lead to produce serious flaw problems such as crack, efflorescene, and upset etc.. The purpose of this paper is to present the practical details for Masonry cavity wall construction to prevent rain penetration and to accommodate differential movement between the inner and outer wythes of cavity walls. Considering rain penetration and differential movement of both wythes of cavity walls, provision of an adequate air space, an airtight back-up wall, clean cavity with weepholes and vents, properly positioned flashing, tie and shelf angle etc. depend on the cavity wall types will help ensure good performance. The present details included noncorrosive hot dip galvanized steel or stainless steel for metal components, plastic and ultra violet resistant polypropylene Copolymer for other components was taken into account the construction method and several types of cavity walls in Korea

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2867-2873
• /
• 2020

In reprocessed uranium, derived from an impoverished fuel of light-water moderated reactors, there are isotopes of ^{232, 234, 236}U, which make its recycling remarkably difficult. A method of concentration of ²³⁵U target isotope in cascade's additional product was proposed to recover the isotopic composition of reprocessed uranium. A general calculation procedure is presented and a parameters' optimization of multi-flow cascades with additional products. For the first time a numeric model of a cascade that uses the cuts of partial flows of stages with relatively high separation factors was applied in this procedure. A novel computing experiment is carried out on separation of reprocessed uranium hexafluoride with providing a high concentration of ²³⁵U in cascade's additional product with subsequent dilution. The parameters of cascades' stages are determined so as to allow reducing the ^{232, 234, 236}U isotope content up to the acceptable. It was demonstrated that the dilution of selected products by the natural waste makes it possible to receive a low enriched uranium hexafluoride that meets the ASTM C996-15 specification for commercial grade.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.5
• /
• pp.37-45
• /
• 2007

WTO/TBT requires that, for technical regulations affecting trade, technical regulatory requirements must be specified where possible in terms of performance rather than design or descriptive characteristics. The movement which made "performance" a keyword in landscape architecture was activated in Japan, one of the leading counties in performance-based regulatory system(PBRS). The Japanese recent movement of systematization activity on performance-based standards and specifications was reviewed and operational applications for performance-based regulatory system in South Korea are summarized as follows: 1. The establishment of performance standards that can be properly evaluated by assessment indicators is necessary in cases when quantitative evaluation is difficult. 2. As a preparation for PBRS, a brief procurement system by technical proposal for the landscape design and construction is necessary. 3. As a preparation for PBRS, activation of an environmental performance evaluation on experimental construction is necessary. 4. As a preparation for PBRS, a certification system of environmental performance on various landscape construction methods is necessary. 5. The Private Finance Initiative Project is the most similar to PBRS therefore, activation of the Private Finance Initiative Project is necessary in landscape architecture projects for park rehabilitation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.367-372
• /
• 2006

The objective of this study is to develop the alternative of the container transport vehicle of new type for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Trailer), S/C(Straddle Carrier), SHC(Shuttle Carrier), AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle is presented in this study is very useful to advanced container terminal with higher productivity.