• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.17-22
• /
• 2003

A kind of image analysis system is used to investigate the structural features of the papers made from Indian mallow. The screen mark on the paper was identified and analyzed. The dusts, shives and fiber bundles were manifested and calculated. In the aspect of Indian mallow hanji's surface characteristics analyzed by an Image analyzer, the average of gray level and its standard deviation hanji from the woody core were rather lower than of bast fiber pulp because of better sheet formation of the formers. Hower. high brightness hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.2
• /
• pp.94-103
• /
• 2008

This study measured technology transfer efficiency for public institutes. The study made use of DEA being one of the non-parametric linear programming to evaluate technology transfer efficiency for public institutes and to measure technology efficiency, pure technical efficiency and scale efficiency. The measurement of the technology transfer efficiency for public institutes was as follows: The cause of the technology transfer inefficiency was affected by pure technical inefficiency more than by scale inefficiency. Public institutes' RTS(Return To Scale) value varied depending upon the features of the organizations than the features of the regions. Public research institutes' RTS value is more effective than universities' RTS value. We compared the RTS group with the RTS of Projected DMU groups. The RTS group had constant returns to scale effect while the RTS of the Projected DMU had increasing returns to scale effect. The technology transfer efficiency of public institutes varied depending upon the features of the organizations and regions : The technology transfer efficiency of public institutes were as follows : public research institutes at the metropolitan area, public research institutes at the local areas, universities at the metropolitan area and universities at the local areas. In other words, the technology transfer efficiency was affected by organizational characteristics more than by regional characteristics at the place where public institutes were located.

• Structural Monitoring and Maintenance
• /
• v.6 no.3
• /
• pp.219-235
• /
• 2019

Scheduled inspections of common crossings are one of the main cost drivers of railway maintenance. Prognostics and health management (PHM) approach and modern monitoring means offer many possibilities in the optimization of inspections and maintenance. The present paper deals with data driven prognosis of the common crossing remaining useful life (RUL) that is based on an inertial monitoring system. The problem of scheduled inspections system for common crossings is outlined and analysed. The proposed analysis of inertial signals with the maximal overlap discrete wavelet packet transform (MODWPT) and Shannon entropy (SE) estimates enable to extract the spectral features. The relevant features for the acceleration components are selected with application of Lasso (Least absolute shrinkage and selection operator) regularization. The features are fused with time domain information about the longitudinal position of wheels impact and train velocities by multivariate regression. The fused structural health (SH) indicator has a significant correlation to the lifetime of crossing. The RUL prognosis is performed on the linear degradation stochastic model with recursive Bayesian update. Prognosis testing metrics show the promising results for common crossing inspection scheduling improvement.

• Proceedings of the CALSEC Conference
• /
• 1998.10a
• /
• pp.129-140
• /
• 1998

ㆍ ECRC ㆍ Knowledge Management ㆍ KM technologies ㆍ KBTS System -Mistakes KMS -Discussion KMS -Distinguished Features(omitted)

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.509-513
• /
• 2004

An area of research called evolvable hardware (EHW) has recently emerged which combines aspects of evolutionary computation with hardware design and synthesis. The features that can be used to identify and classify evolvable hardware are the evolutionary algorithm, the implementation and the genotype representation. This paper gives an introduction to the field. It continues by including classifying the EHW and the applications of the area.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.1
• /
• pp.95-103
• /
• 1998

Many new technologies and developments designed to increase paper machine speeds and improve paper printability have emerged in recent years. These improvements have changed the structure of paper and given winder manufacturers new challenges, especially as the requirements of printing presses have also changed. Ever-increasing roll widths and diameters are needed. Along with faster press speeds and shorter acceleration times, the unwinding of roils in the press room has become a true test of paper strength and roll structure, In the following we will review the special winding features of coated papers and discuss a selection of the winder type to meet a mill's specific needs.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2002.10a
• /
• pp.177-179
• /
• 2002

Total elbow prostheses which are now available in clinical use can generally be classified into two major categories ; one bing linked prostheses, another being unlinked prostheses. Of those two categories I am dealing here only with the problems of the unlinked type prosthesis, particularly with those of non-constrained, surface-replacement prostheses. Furthermore, my presentations this time may have to be narrowed down only to the topics regrading the particular features and some of the technical problems with Kudo Elbow Prosthesis, due to the time limit assigned for this presentation.

• Journal of Information Management
• /
• v.2 no.3
• /
• pp.2-4
• /
• 1964

Scientific documentation is one of the three preconditions for scientific research and its technical application in the industrialization process. To solve the documentation problems on an international level, UNESCO promotes abstracting, standardization of terminology and of scientifc publications, automatic information processing and translating. Moreover, UNESCO has helped to establish since 1950, on the request of interested national governments, 12 documentation centers within the framework of United Nations Technical Assistance Programme by providing experts, fellowships and equipment. Some data on these documentation centers and a comparison of their features should be of interest for all those who wish to set up new documentation centers or to improve already existing ones.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.181-183
• /
• 2006

Digital topographic map in Korea contains layers of spatial and attribute data for 8 land features such as railroads, watercourses, roads, buildings and etc. Some of the layers such as building and forest don't include any information about height, which can be just prepared by interpretation of remote sensed data or field survey. LiDAR(Light Detection And Ranging) data using active pulse and digital camera provides data about height and form of land features. LiDAR data can be used not only to extract the outline of land features but also to estimate the height. This study presents technical availability for extraction and estimation of land feature's outline and height using LiDAR data which composes of natural and artificial land features, and digital aerial photograph which was taken simultaneously with the LiDAR. The estimated location, outline and height of land features were compared with the field survey data, and we could find that LiDAR data and digital aerial photograph can be a useful source for estimating the height of land features as well as extracting the outline.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.175-182
• /
• 2004

As a bridge between design and manufacturing, process planning is to generate a sequenced set of instructions to manufacture the specified part. Automatic interpretation of manufacturing information incorporated in the design documentation such as CAD file has been a knotty subject for manufacturing engineers since no current data exchange format for product data provides a perfect interface between heterogeneous systems. The recent neutral data exchange format STEp, standard for the exchange of product model data, includes not only geometry but also technical and managerial information. STEP AP(Application Protocol) 224 is specifically dedicated to the mechanical product definition for process planning using machining features. Given a design information in STEP AP 224 format, process planning can be made without human intervention. This paper describes a method to determine the sequence of machining features by using the machining features and the manufacturing information expressed in STEP AP224.