• The Journal of Advanced Prosthodontics
• /
• v.10 no.6
• /
• pp.422-429
• /
• 2018

PURPOSE. Accurate color matching of maxillofacial prostheses to skin is important for esthetics. A computerized color matching system specific to human skin has recently been developed. The purpose of this study was to evaluate the accuracy in color and translucency matching of the computerized color matching system across different skin colors. MATERIALS AND METHODS. The silicone was colored to simulate 28 different skin colors (n=5) to serve as "target skin colors". Using a spectrocolorometer (e-skin), color codes were determined for "replicate skin color" fabrication. CIELAB Delta-E between target skin color-replicate skin color pairs and translucency parameter were calculated. CIELAB Delta-E values were compared with one-way ANOVA and Tukey multiple-comparison. The agreement between $L^*$, $a^*$, $b^*$ and translucency parameter of target skin colors and replicate skin color were calculated by a two-way mixed average measures intraclass correlation coefficient. Translucency parameter of target skin color- replicate skin color pairs were compared with Paired t-test (${\alpha}=.05$). RESULTS. The mean CIELAB Delta-E value was 3.83 and significant differences were found among colors. The intraclass correlation coefficient showed excellent reliability for $L^*$, $a^*$, $b^*$ and good reliability for translucency parameter (P<.001). The mean translucency parameter of replicate skin colors was significantly higher than that of translucency parameter. CONCLUSION. The computerized color matching system specific to human skin was found to be reliable in terms of color and translucency between target skin colors and replicate skin color.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.123-130
• /
• 2014

In this study, a vision-based displacement measurement system is developed to accurately measure the displacement of a structure with locating the camera at arbitrary position. The previous vision-based system brings error when the optical axis of a camera has an angle with the measured structure, which limits the applicability at large structures. The developed system measures displacement by processing the images of a target plate that is attached on the measured position of a structure. To measure displacement regardless of the angle between the optical axis of the camera and the target plate, planar homography is employed to match two planes in image and world coordinate systems. To validate the performance of the present system, a laboratory test is carried out using a small 2-story shear building model. The result shows that the present system measures accurate displacement of the structure even with a camera significantly angled with the target plate.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.87-96
• /
• 2020

In this paper we proposed the test design method of reliability growth management. First, we presented the process for establishing the reliability growth management test design considering the number of failures and the termination test time. Reliability growth analysis of continuous system was performed in accordance with the test design process presented. In case the reliability test result is not met with the reliability target value after more than three failures occurred, the required test times were analyzed that 1,725 hrs for one corrective action, 1,950 hrs for two corrective actions. If the number of failures is less than three, design a reliability demonstration test according to confidence level 80% and 90% was performed using RGA 11 Software. As a result, it is possible to establish the reliability growth management test design with sufficient use of available resources. The results of this study can be used when establishing a test design for assessment of reliability growth management of all continuous systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.159-166
• /
• 2016

In this paper, an active object tracking system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and phase-type correlation scheme and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-embedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 480 frames of the test input stereo image, it is analyzed that a standard variation between the measured and computed the estimated target's height and an error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 1.03 and 1.18% on average, respectively. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.813-818
• /
• 2020

This study is a study on the characteristics and analysis of the reflected signals about the target in the VHF band. In advance, the RCS(Radar Cross Section) characteristics of the target were analyzed by using the CST electromagnetic analysis tool, and the target was detected by using the Bi-Static method, and the change in the signal-to-noise ratio was tested. The test results show similar results with no significant fluctuations in the signal-to-noise ratio characteristics for the detection of signals reflected on the target, such as the results for RCS analysis according to the pre-incidence angle. In the future, this study will be used for RCS analysis of the targets and target detection of Radar in VHF/UHF band with relatively large wavelength compared to the X band.

• Phonetics and Speech Sciences
• /
• v.10 no.3
• /
• pp.31-39
• /
• 2018

This paper aims to present a taxonomy of non-standard words (NSW) for developing a French text normalization system and to propose a method for evaluating this system based on a corpus. The proposed taxonomy of French NSWs consists of 13 categories, including 2 types of letter-based categories and 9 types of number-based categories. In order to evaluate the text normalization system, a representative test set including NSWs from various text domains, such as news, literature, non-fiction, social-networking services (SNSs), and transcriptions, is constructed, and an evaluation equation is proposed reflecting the distribution of the NSW categories of the target domain to which the system is applied. The error rate of the test set is 1.64%, while the error rate of the whole corpus is 2.08%, reflecting the NSW distribution in the corpus. The results show that the literature and SNS domains are assessed as having higher error rates compared to the test set.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.99-106
• /
• 2008

5kWh FESS(Flywheel Energy Storage System) using AMB(Active Magnetic Bearing) has been under development and 1st trial system has been finished and run the operating test. Unfortunately, the test result was not satisfactory because FESS could increase the rotational speed up to 9,000 rpm only although the target rotational speed is 18,000rpm. It's because 1st bending mode frequency of flywheel shaft was too low and imbalance response was too big. To achieve the target speed, 1st bending mode and imbalance response must be improved and the whole FESS needed to be designed again. This paper presents the newly designed FESS and what has been changed from the 1st trial FESS to improve 1st bending mode and imbalance response. The experimental results to see how much 1st bending mode frequency was improved are presented, too.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.824-830
• /
• 2010

It is not easy job to find a underwater target using sonar system in the ASW operations. Many researchers have tried to solve anti-submarine search problem aiming to maximize the probability of detection under limited searching conditions. The classical 'Search Theory' deals with search allocation problem and search path problem. In both problems, the main issue is to prioritize the searching cells in a searching area. The number of possible searching path that is combination of the consecutive searching cells increases rapidly by exponential function in the case that the number of searching cells or searchers increases. The more searching path we consider, the longer time we calculate. In this study, an effective algorithm that can maximize the probability of detection in shorter computation time is presented. We show the presented algorithm is quicker method than previous algorithms to solve search problem through the comparison of the CPU computation time.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.541-545
• /
• 2010

AUTOSAR, a standard software platform for automotive, has been developed to manage software complexity and improve software reuseability. However reuse of test system is difficult because it is dependant on implementation language and test phase. In this paper, we suggest a test system generation method for AUTOSAR software component using TTCN-3, a standardized testing language. TTCN-3 test system is generated automatically from AUTOSAR XML containing software design information. The test system consists of TTCN-3 tester and target system and tests functionality and worst case response time of software under simulation environment. With the proposed testing techniques we can reduce time and effort to build the testing system and reuse testing environment.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.19-29
• /
• 2008

In case of unit testing, White-box test can be used to closely check source code and to analyze logic and statement errors. On the other hand, in case of function testing of system level, Black-box test can be mainly used to compare actual and expected results by inputting test data because the scale of function is large. This Black-Box test in system testing level has problem in tracing errors in source code when we find errors. Moreover applying White-box test is not easy for system testing level because the levels of test target are different. Therefore this paper suggests the vertical test method of a practical and integrated system level which can checks up to source code level using White-box test style although it aims to test the highly abstract level like a system function. In addition, the experiment explains how to apply the vertical test by displaying an example which traces from UML specification model to the source code and also shows efficiency of error trace.