• 한국안전학회지
• /
• 제24권3호
• /
• pp.65-70
• /
• 2009

In-vehicle route guidance information(RGI) systems have been developed with the advancement of the information and communication technologies. However, the RGI is provided by a pre-determined option, drivers occasionally pass the target intersection owing to non- or late- recognizing it. The purpose of this experiment is to examine the position of driver's tum signal operation and intersection recognition approaching at the target intersection which is difficult to identify as a preliminary research on developing the additional RGI connecting with the tum signal control. The field experiment was conducted to measure distances of the turn signal operation and intersection recognition from the target intersection according to driving lanes and landmarks at adjacent intersection. And, glance behavior to the car navigation display was evaluated by using an eye camera. The results indicate that drivers operate the turn signal after confirming a landmark in the case of the intersection with it. However, most case of driving, drivers operate the tum signal at 40 to 50m before coming to the target. To provide the additional RGI, when drivers do not operate the tum signal approaching at the target intersection based on the results, is expected to improve the traffic safety and the comfort for drivers.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.66-74
• /
• 2012

The virtual target signal generator was developed to verify the shipborne tracking radar performance. It was used to DRFM(Digital RF Memory) method to generate the virtual moving targets. The target signal includes Doppler shift and RCS according to the target motion. And the signal generator can make jamming signal and clutter to test shipborne radar performance at real environmental condition. This paper described the functional diagram and the hardware configuration items to meet the test requirements for the tracking radar. And it showed the critical design points for the sub-systems. The signal generator which was developed in this paper shared the operational information of the radar with the radar command and control part. To test the frequency agility of the radar, it had the local oscillator which could do high speed frequency switching according to radar information. By communicating between the signal generator and the radar command and control part, the local oscillator of signal generator could be controlled every pulse. It reduced the instantaneous bandwidth of signal generator and minimized the spurious. So it lowered the probability of generating wrong targets.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.36-43
• /
• 2003

Multi-target away signal simulator which can simulate the radiated noises of maneuvering targets in a specified ocean range is an essential equipment for the validation of developed towed array sonar system. This simulator should provide realistic multi-channel signals those are required for beamforming on the signal processing unit of towed away system. This paper describes the overall system configuration and signal synthesis techniques for the target radiated noise. And this paper considers why the time delays between target and individual sensors are caused and how to compensate these time delays to individual sensors output. This multi-purpose target simulator could be used for the training of TASS operators.

• 융합신호처리학회논문지
• /
• 제11권3호
• /
• pp.203-208
• /
• 2010

본 논문에서는 소나 시스템을 통해 획득된 수중 음향 신호를 디지털 영상의 형태로 변환한다. 그리고 이러한 형태의 영상에 대해 영상 처리 기법을 도입하여 표적 후보를 탐지하고, 이들 영역에 대해 정보를 강화하는 알고리즘을 제안한다. 수중 표적의 탐지 과정은 우선 수중음향신호 영상에서 불규칙한 형태로 분포하고 있는 배경 잡음을 추정하여 재구성한 뒤, 원 영상에서 배경 영상을 제거하여 초기 표적 후보군을 획득한다. 또한 도플러 신호 정보를 가공하여 가중치 맵을 생성하고, 배경잡음이 제거된 영상에 대해 가중치 맵을 이용한 필터링 과정을 수행함으로써 표적 후보에 대한 정보를 보다 정확히 확보하고, 단일프레임에서의 표적 후보 정보를 강화한다. 본 논문에서는 시뮬레이션으로 획득된 수중음향신호에 대해 제안된 알고리즘을 적용하여, 불규칙적으로 발생하게 되는 잡음이 대부분 제거됨을 확인하였고, 필터링 및 표적 탐지 과정을 통해 수중음향신호 영상에서 표적이 더욱 명확히 표시됨을 확인하였다.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1044-1049
• /
• 2018

CNN(Convolutional Neural Networks)은 동물의 시각정보처리과정을 모델링한 신경망으로 다양한 분야에서 좋은 성능을 보여주고 있다. 본 논문에서는 CNN을 사용하여 능동소나 신호의 스펙트로그램을 분석하고, 표적과 비표적을 식별하는 연구를 수행하였다. 데이터를 표적이 포함된 비율에 따라 8클래스로 구분하고, CNN의 학습에 사용하였다. 신호의 스펙트로그램을 프레임별로 나누어 입력으로 사용한 결과, 표적신호의 위치에서만 표적신호에 해당하는 7개 클래스의 식별 결과가 순차적으로 나타나는 특성을 사용하여 표적과 비표적을 식별해낼 수 있었다.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.652-659
• /
• 2009

To analyze and verify the performance of a pulse radar without the real target data, there is a need to make the simulated signal which is similar to the received signal of the real target. In this paper, a method of the received signal generation for the pulse radar is proposed to solve the above need. The user-made scenarios are used to model the fast and small target and the clutter data based on the ground environment. These data are transformed into the electric signal using the proposed method. The efficiency of the proposed method is proved by comparing the signal of a field test with the simulated signal.

• 한국음향학회지
• /
• 제32권6호
• /
• pp.455-471
• /
• 2013

능동소나는 일반적으로 천해에서 존재하는 표적을 탐지하기 위해 사용된다. 신호가 송신되고 표적으로부터 반향되어 되돌아올 때, 표적 반향신호는 다중경로, 거친 해저면 또는 해수면에 의한 산란 그리고 음속구조에 의한 굴절과 같은 다양한 음파전달 특성에 의해 왜곡 되어 수신되며, 이는 표적 탐지를 어렵게 만든다. 그러므로 능동소나의 운용성능 체계에서 표적 신호 모의 시 음파전달 특성을 고려하는 것이 필요하다. 본 논문에서는 단상태 능동소나 시스템을 고려하였으며, 표적 반향, 잔향음 그리고 주변소음은 각각 시계열 함수로 모의되었다. 마지막으로 전체 수신 신호를 모의하기 위해 위 신호들을 합하였다. 표적의 특징(형태, 위치, 자세각 등)을 반영한 3차원 대표반향점 모델은 음원과 표적 사이에 각각의 다중경로를 고려하여 표적 반향 신호를 모의하였다. 본 논문의 결과는 표적 신호 모의 시 직접파만을 고려한 알고리즘의 결과와 비교하였다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.71-78
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.